• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.3
• /
• pp.843-871
• /
• 2015

Cloud computing evolve as a cost effective business model for IT companies to focus on their core business without perturbing on infrastructure related issues. Hence, major IT firms and Small & Medium Enterprises (SME) are adopting cloud services on rental basis from cloud providers. Cloud Service level agreements (SLA) act as a key liaison between consumers and providers on renting Anything as a Service (AaaS). Design of such an agreement must aim for greater profit to providers as well as assured availability of services to consumers. However in reality, cloud SLA is not satisfying the parties involved because of its inherent complex nature and issues. Also currently most of the agreements are unilateral to favour the provider. This study focuses on comprehensive, 360-degree survey on different aspects of the cloud service agreements. We detailed the life cycle of SLA based on negotiation, different types of SLA, current standards, languages & characteristics, metrics and issues involved in it. This study will help the cloud actors to understand and evaluate the agreements and to make firm decision on negotiation. The need for standardized, bilateral, semantic SLA has also been proposed.

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.3
• /
• pp.211-221
• /
• 2014

Purpose: The purpose of this study was to evaluate the surface characteristics and response of osteoblast-like cell at SLA surface treated with NaOH. Materials and methods: Three kinds of specimens were fabricated for the experiment groups. Control group was a machined surface, SLA group was a conventionally SLA treated surface, and SLA/NaOH gorup was SLA surface treated with NaOH. To evaluate the surface characteristics, the surface elemental composition (XPS), surface roughness and surface contact angle were evaluated in each group. And the cytotoxicity, cell adhesion, cell proliferation and ATP activity of osteoblast-like cells (MG-63 cells) were compared in each group for evaluatation of the cell responses. Statistical comparisons between groups were carried out via one-way ANOVA using the SPSS software (SPSS Inc., Chicago, USA), and then performed multiple comparisons. The differences were considered statistically significant at P<.05. Results: SLA surface treated with NaOH (SLA / NaOH group) was changed to hydrophilic surface. All groups did not show the cytotoxicity to the MG-63. In cell adhesion studies, SLA / NaOH group showed the higher degree of adhesion than anothers (P<.05), Up to 7 days of incubation, the proliferation was showed the increasing tendency in all groups but SLA / NaOH group showed the highest cell proliferation between the three groups (P<.05). At 7 days of incubation, there was no difference in ALP activities between the three groups, but at 14 days, SLA / NaOH group showed significant increase in ALP activities (P<.05). Conclusion: In this study, SLA surface treated with NaOH promoted cell adhesion, proliferation and differentiation. It means that SLA/NaOH group is possible to promote osseointegration of implants.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.31 no.4
• /
• pp.763-777
• /
• 2021

Information security started as an IT operation process and is now recognized as an important issue of information technology, and each international organization is newly defining the concept. Information security itself is a new combination of IT technologies, a set of technologies and a technology area. As IT outsourcing becomes common in many public sectors, SLAs are introduced to evaluate the level of IT services. In the area of information security, many studies have been conducted on the derivation and selection of SLA performance indicators, but it is difficult to find a way to apply the performance indicators to service level evaluation and performance systems. This thesis conducted a study on the application of a service evaluation system for information security performance indicators based on the public sector and a performance system including compensation regulations. It presents standards and rewards(incentive and penalty) that define expectation and targets of performance indicators that take into account the environment and characteristics of a specific public sector, and defines appropriate SLA costs. It proposes a change plan for the organizational structure for practical SLA application and service level improvement.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.4
• /
• pp.1-8
• /
• 2017

This paper concerns the possibility of 3D printing reverse idle gears for tractor transmission. For the purposes of this experiment, idle gears were manufactured using a SLA 3D printer, FDM 3D printer, and through machining. The accuracy of the idle gears produced in these three different ways were evaluated by the properties of their outer diameter, inner diameter, roundness, concentricity, parallelism, span, backlash, and gear grade. The tooth characteristics of the idle gears were evaluated by their profile, lead, and the pitch of the gears. The results of this experiment determined that the surface conditions created by the finishing process had a significant impact on the dimensional accuracy of the gears and the characteristics of their teeth.

• Journal of KIISE
• /
• v.42 no.5
• /
• pp.591-600
• /
• 2015

SLA (Service Level Agreement) is an essential factor that must be guaranteed to provide a reliable and consistent service to user in cloud computing environment. Especially, a contract between user and service provider with SLA is important in an environment using a cloud service brokerage. The cloud computing is classified into IaaS, PaaS, and SaaS according to IT resources of the various cloud service. The existing SLA is difficult to reflect the quality factors of service, because it only considers factors about the physical Network environment and have no methodological approach. In this paper, we suggested a method to specify the quality characteristics of software and proposed a mechanism and structure that can exchange SLA specification between the service provider and consumer. We defined a meta-model for the SLA specification in the SaaS level, and quality requirements of the SaaS were described by the proposed specification language. Through case studies, we verified proposed specification language that can present a variety of software quality factors. By using the UDDI-based mediation process and architecture to interchange this specification, it is stored in the repository of quality specifications and exchanged during service binding time.

• Journal of Mechanical Science and Technology
• /
• v.18 no.3
• /
• pp.443-452
• /
• 2004

For stereo lithography process, accuracy of prototypes is related to laser power, scan speed, scan width, scan pattern, layer thickness, resin characteristics and etc. An accurate prototype is obtained by using appropriate process parameters. In order to determine these parameters, the stereolithography (SLA) machine using neural network was developed and efficiency of the developed SLA machine was compared with that of the traditional SLA. Optimum values for scan speed, hatching spacing and layer thickness improved the surface roughness and build time for the developed SLA.

• Journal of Periodontal and Implant Science
• /
• v.47 no.3
• /
• pp.182-192
• /
• 2017

Purpose: Contact and distance osteogenesis occur around all endosseous dental implants. However, the mechanisms underlying these processes have not been fully elucidated. We hypothesized that these processes occur independently of each other. To test this, we used titanium (Ti) tubes to physically separate contact and distance osteogenesis, thus allowing contact osteogenesis to be measured in the absence of possible triggers from distance osteogenesis. Methods: Sandblasted and acid-etched (SLA) and modified SLA (modSLA) implants were used. Both types had been sandblasted with large grit and then etched with acid. The modSLA implants then underwent additional treatment to increase hydrophilicity. The implants were implanted into rabbit tibiae, and half were implanted within Ti tubes. The bone-to-implant contact (BIC) ratio was calculated for each implant. Immunohistochemical analyses of bone morphogenetic protein (BMP)-2 expression and new bone formation (Masson trichrome stain) were performed. Results: The implants outside of Ti tubes were associated with good bone formation along the implant surface. Implantation within a Ti tube significantly reduced the BIC ratio (P<0.001). Compared with the modSLA implants, the SLA implants were associated with significantly higher BIC ratios, regardless of the presence or absence of Ti tubes (P=0.043). In the absence of Ti tubes, the bone adjacent to the implant had areas of new bone formation that expressed BMP-2 at high levels. Conclusions: This study disproved the null hypothesis and suggested that contact osteogenesis is initiated by signals from the old bone that undergoes distance osteogenesis after drilling. This signal may be BMP-2.

• Journal of Periodontal and Implant Science
• /
• v.45 no.3
• /
• pp.94-100
• /
• 2015

Purpose: The aim of this study was to investigate the combined effects of physical and chemical surface factors on in vivo bone responses by comparing chemically modified hydrophilic sandblasted, large-grit, acid-etched (modSLA) and anodically oxidized hydrophobic implant surfaces. Methods: Five modSLA implants and five anodized implants were inserted into the tibiae of five New Zealand white rabbits (one implant for each tibia). The characteristics of each surface were determined using field emission scanning electron microscopy, energy dispersive spectroscopy, and confocal laser scanning microscopy before the installation. The experimental animals were sacrificed after 1 week of healing and histologic slides were prepared from the implant-tibial bone blocks removed from the animals. Histomorphometric analyses were performed on the light microscopic images, and bone-to-implant contact (BIC) and bone area (BA) ratios were measured. Nonparametric comparison tests were applied to find any significant differences (P<0.05) between the modSLA and anodized surfaces. Results: The roughness of the anodized surface was $1.22{\pm}0.17{\mu}m$ in Sa, which was within the optimal range of $1.0-2.0{\mu}m$ for a bone response. The modSLA surface was significantly rougher at $2.53{\pm}0.07{\mu}m$ in Sa. However, the modSLA implant had significantly higher BIC than the anodized implant (P=0.02). Furthermore, BA ratios did not significantly differ between the two implants, although the anodized implant had a higher mean value of BA (P>0.05). Conclusions: Within the limitations of this study, the hydrophilicity of the modSLA surface may have a stronger effect on in vivo bone healing than optimal surface roughness and surface chemistry of the anodized surface.

• Tribology and Lubricants
• /
• v.37 no.1
• /
• pp.1-6
• /
• 2021

This paper presents the experimental results of hydrophobic surfaces developed using a stereolithography-based additive-manufacturing technique. The additive manufacturing technique can be used to manufacture objects with complex geometries from computer-aided design data. Several additive manufacturing methods, such as selective laser sintering, fused deposition modeling, stereolithography apparatus (SLA), and inkjet-based system, have been developed. The SLA is a form of three-dimensional printing technology used to create prototypes, patterns, and production parts in successive layers through photochemical processes. Light causes chemical monomers and oligomers to cross-link together to form objects composed of polymers. Moreover, this method is economical for fabricating surfaces with high output resolution and quality. Here, we fabricate various surfaces using different shapes using an SLA. The surfaces with micro-patterns are fabricated for 10 cases, including the biomimetic surface. The fabricated surfaces with various micro-patterns are evaluated for hydrophobicity performance based on the static contact angle. The contact angle is measured three times for each case, and the averaged value is used. The results indicate that the arrangements in a staggered structure have a larger contact angle than those in a line when the same micro-pattern is applied. Moreover, the mimetic surfaces exhibit more hydrophobic characteristics than those of artificial micro-patterns.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.9
• /
• pp.56-62
• /
• 2022

This study analyzed the output precision of 3D printing methods. The inner impeller of the centrifugal compressor was printed in as a sheet with 100% packing density using two methods: field deposition modelling and stereolithography. Dimensional differences between the initial CAD and printed models were evaluated using a 3D scanner. To investigate the dimensional characteristics of the 3D printed impeller, 3D dimension analysis and point dimension analysis were performed. The point dimension analysis was divided into 3D and 2D for comparative analysis.