• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.9
• /
• pp.196-203
• /
• 2004

SL(Stereolithography) part is made by piling up thin layers which causes the stair stepping effect at the surface of SL parts. The effect brings about excessive surface roughness and cuts down the merits of using SL part. Hence, additional post-machining finishing such as traditional grinding is required. But the traditional post-machining is detrimental to part geometry and time consuming. In this study, therefore, a paraffin coating and grinding post-machining is newly proposed to improve the surface quality of SL fart. The paraffin which has suitable properties for the proposed post-machining is coated all over the part surface. By grinding the only over-coated paraffin based on boundary of the SL part surface, the surface roughness can be improved without any damage on the part. Also, it is verified that SL part finished by the proposed post-machining process can be applied for rapid tooling as pattern through manufacturing silicon rubber molding and casting test.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.45-48
• /
• 2001

SL(Stereolithogrphy) part is made by piling up thin layers which causes the stair stepping effect at the surface of SL parts. This effect causes excessive surface roughness and requires additional postprocess finishing such as abrasive basting which is detrimental to part geometry and time consuming. Hence paraffin coating and grinding postprocess is proposed to raise the surface quality of SL part. The paraffin which has suitable properties for the proposed postprocess is coated all over the part surface. By grinding the thin layer of coated on the SL part only, the surface roughness can be improved without any damage on the part. From the experimental result, It is verified as very practical for die casting with silicon rubber mold.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.659-662
• /
• 2002

SL(Stereolithography) part is made by piling up thin layers which causes the stair stepping effect at the surface of SL parts. This effect brings about excessive surface roughness and requires additional post-process finishing such as abrasive techniques that are detrimental to part geometry and time consuming. Hence a wax coating and grinding post-process is proposed to improve the surface quality of SL part. The wax that has suitable properties for the proposed post-process is coated all over the part surface. By grinding the thin layer of coated on the SL part only, the surface roughness can be improved without any damage on the part. From the experimental results, This approach is considered to be very practical fur die casting with RT(Rapid Tooling) techniques.

• International Journal of Precision Engineering and Manufacturing
• /
• v.8 no.3
• /
• pp.14-19
• /
• 2007

Rapid prototyping (RP) technology can fabricate any 3D physical model regardless of geometric complexity using the layered manufacturing (LM) process. Stereolithography (SL) is the best-known example of RP technology. In general, the surface quality of a raw SL-generated part is unsatisfactory for industrial purposes due to the step artefact created by the LM process. Despite of the increased number of applications for SL parts, this side effect limits their uses. In order to improve their surface quality, additional post-machining finishing, such as traditional grinding, is required, but post-machining is time consuming and can reduce the geometric accuracy of a part. Therefore, this study proposes a post-machining technology combining coating and grinding processes to improve the surface quality of SL parts. Paraffin wax and pulp are used as the coating and grinding materials. By grinding the coating wax only up to the boundary of the part, the surface smoothness can be improved without damaging the surface. Finally, moulding and casting experiments were performed to confirm the suitability of the SL parts finished using the proposed process with rapid tooling (RT) techniques.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.10B
• /
• pp.1979-1985
• /
• 1999

In this paper, we offer an analysis method for SL/D/1/K queueing system, where the shifting-level (SL) process proposed in the part I of this study[1]. Since an exact analysis of SL/D/1/K queueing system is very difficult, we propose an approximation method, where the queze sizes at input state transition epochs is quantized and thus the name 'quantization reduction method'. We provide the upper and lower bounds of the approximation for the system size distribution also, In addition, since the continuos version of well-known DAR(1) model is a kind of SL process with exponential correlation term only, the proposed method can be directly applied to the analysis of DAR(1)/D/1/K queueing system as well.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.10B
• /
• pp.1971-1978
• /
• 1999

In this paper, we study the effects of long-range dependence (LRD) in VBR video traffic on queueing system. This paper consists of Part I and II. In Part I, we present a (LRD) video traffic model based on the shifting-level (SL) process. We observe that the ACF of an empirical video trace is accurately captured by the shifting-level process with compound correlation (SLCC): an exponential function in short range and a hyperbolic function in long range. We present an accurate parameter matching algorithm for video traffic. In the Part II, we offer the queueing analysis of SL/D/1/K called ‘quantization reduction method’. Comparing the queueing performances of the DAR(1) model and the SLCC with that of a real video trace, we identify the effects of SRD and LRD in VBR video traffic on queueing performance. Simulation results show that Markoivian models can estimate network performances fairly accurately under a moderate traffic load and buffer condition, whereas LRD may have a significant effect on queueing behavior under a heavy traffic load and large buffer condition.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.56 no.3
• /
• pp.324-330
• /
• 2023

We investigated the relative growth and squamation of larvae and juveniles of cultured Larimichthys polyactis. Analysis of the relative growth of larvae and juveniles showed that their preanal length, head length, eye diameter, body depth, and snout length increased with growth. There was no significant chage in the relative growth. The ratio of preanus length to standard length (SL) increased rapidly until SL was approximately 12 mm, and then increased gradually. Cycloid scales first appeared on the lateral line, progressed to the abdominal cavity at 15.13 mm SL, and expanded to the occipital region, base of pectoral fin, and ventral region of the eye at 17.82 mm SL. At 18.03 mm SL, scales formed on the cheek, and those at the base of pectoral fin and in the abdominal cavity were connected to each other. At 19.06 mm SL, major part of the head was covered by scales, except near the lower jaw. Cycloid scales on the lateral line changed to ctenoid scales at the range of 31.71-32.24 mm SL, and those on the nape changed at the range of 69.02-70.84 mm SL. Our results may help to establish conservation and management strategy for Larimichthys polyactis aquaculture.

• Development and Reproduction
• /
• v.22 no.4
• /
• pp.361-367
• /
• 2018

The newborn, Hippocampus kuda larvae were 6.97-8.81, standard length (SL) mm (mean 7.89 mm) and mouth and anuse were open. Dorsal fin rays 15-18 and pectoral fin-rays were counted 8 and had 10-11+21 myotomes, body's bony plate ring being developed strongly in the central axis of myotomes part. 4 days after bearing, the SL was 7.02-9.47 mm (mean 8.24 mm) and nostrils began to open. 12 days after bearing, larvae attained to 8.91-11.2 SL mm (mean 10.0 mm). From this time, their unique predation habit appeared. 21 days bearing, larvae attained to 12.1-14.8 SL mm (mean 13.4 mm) the and thorn of back was enlarged among the plate formed around ring. 41 days bearing, seahorses attained to 17.1-17.8 SL mm (mean 17.4 mm) and the number of body's bony plate ring of the top of rings trunk was 11 and on the tail of them was 33-36, similar to figure of adult.

• Ocean Science Journal
• /
• v.42 no.4
• /
• pp.231-240
• /
• 2007

Three marine fish species are recorded for the first time from Korean waters: a molid (Ranzania laevis, 1 specimen, 279.8 mm SL) and bramid (Pterycombus petersii, 3 specimens, 95.3-214.0 mm SL) collected from a large purse seine off Jeju Island, in the southern sea of Korea, and a carangid (Carangoides dinema, 1 specimen, 194.5 mm SL) from a set net in coastal waters off Busan, in the southeastern sea of korea. R. laevis is characterized by a wedge-shaped body and truncated clavus; P. petersii by the dorsal fin origin above or behind the posterior margin of eye, and dorsal and anal fins depressible; and C. dinema by a row of black blotches along the second dorsal fin base, the curved part of the lateral line longer than straight part, and 18 and 16 dorsal and anal fin rays, respectively. New Korean names are proposed for all three species.

• Journal of the Korea Institute of Building Construction
• /
• v.7 no.4
• /
• pp.125-132
• /
• 2007

The use of Self-Leveling material is increasing recently. This paper assesses the quality of surface layer of concrete floor when Self-Leveling material is defective. The paper shows how to predict the defect of SL material before construction begins. The relationship between the quality of surface layer of concrete floor and the defect of SL material was determined and the quality of surface layer of concrete floor was then estimated. The relations between the quality of surface layer and the defect of SL material were determine considering surface strength, moisture, and consistency of surface layer. Absorbing amount was used as the indicator of consistency and the absorbing amount of test material was measured. Then the relations between the test material and surface strength were determined. Generally concrete floor with greater consistency has greater surface strength, however in this study, we hound that high impact concrete floor could have lower surface strength as the consistency gets bigger. The relations between the level of defect occurred in SL material and the quality of surface layer were examined and we clarified that the surface layer with lower consistency gets higher possibility to occur exfoliation in early stage, one or two weeks after constructing SL material. When the consistency is sufficient, the occurring situation of defect depends upon the moisture of surface layer. Little amount of moisture gets higher possibility not to occur the defect. As the amount increases, fissure generates and early exfoliation may occur. In addition, the level of fissure is highly related with the surface strength.