• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.7
• /
• pp.1405-1409
• /
• 2004

This paper is studied new block mode decision algorithm for H.264/AVC. The fast block mode decision algorithm is consist of block range decision algorithm. The block range decision algorithm classifies the block over 8$\times$8 size or below for 16${\times}$16 macroblock to decide the size and type of sub blocks. As the sub blocks of 8$\times$8, 8r4, 4$\times$8 and 4$\times$4, which are the blocks below 8$\times$8 size, include important motion information, the exact sub block decision is required. RDC(RDO cost) is used as the matching parameter for the exact sub block decision. RDC is calculated with motion strength which is the mean value of neighbor pixels of each sub block. The sub block range decision reduces encoding arithmetic amount by 34.62% on the average more than the case not using block range decision. The block mode decision using motion strength shows improvement of PSNR of 0.05[dB].

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.9
• /
• pp.1397-1406
• /
• 2008

This research was to develop Taekwondo trunk protector(Hogu) and head protector's sizing systems corresponding the regulations by World Taekwondo Association. These sizing systems were established using 2003-2004 Size Korea anthropometric data. The result can be summarized as follows: According to the analysis of correlation, most measurements had high relationship with weight for Hogu and head girth for head protector. Six sizes(47, 54, 59, 64, 70, 76) for Hogu and 4 sizes(52, 54, 56, 60) for head protector were suggested in this study. Hogu sizes indicate body weights and head protector sizes express head girth measurements. By the comparison between current Hogu sizes and new sizes, the smaller sizes of new Hogu were bigger than current sizes in bust girth, back fastening length, shoulder length. On the other hand, the bigger sizes of new Hogu were larger than current sizes in bust girth, back fastening length, shoulder length. In addition, new Hogu's lengths were shorter than current Hogu in all sizes. The lengths of Neck to collar bone in new Hogu sizes were longer than current Hogu. In case of the head protector, there were no measurements besides outer circumference of helmet in recognized specifications of WTF. Therefore some referable measurements such as head girth, head length, bitragion arc, sagital arc were suggested in new size specification. When helmet sizes were suggested, the thickness of the NBR foam also were considered.

• Journal of Navigation and Port Research
• /
• v.28 no.10 s.96
• /
• pp.933-940
• /
• 2004

A construction project of Incheon 2nd bridge, which is connected between the Incheon Song-Do New Town and the Incheon International Airport in Young-Jong-Do, has been proposed by the private capital in 1999. But the optimal width of the main span has not been decided in spite of the three investigations into the feasibility of ship's safe transit in this planned bridge. In this paper, we study the optimal width of the main span according to the traffic volume in the future traffic and the ship maneuverability of maximum size aspect. The result of this study, the channel in the main span of Incheon 2nd bridge is required to design two-way traffic scheme and the width of 1,000m, which will satisfy the safe transit from the viewpoint of the traffic volume in the future traffic and the ship maneuverability of maximum size.

• Animal Systematics, Evolution and Diversity
• /
• v.20 no.2
• /
• pp.201-214
• /
• 2004

Some actiniarians were collected from the coasts of Jejudo and Baekdo Islands in Korean waters from 1971 to 2004. They are identified into three species within three families, which are newly recorded to Korean actiniarian fauna: Halcampella maxima Hertwig, 1888 within the tribe Athenaria, and also Aulactinia coccinea (Verrill, 1866) and Stichodactyla tapetum (Ehrenberg, 1834) within the tribe Thenaria. They are described in detail with figures and tables together with the distribution and size of cnidae. In preserved specimens, mature oocytes of H. maxima were observed in winter. Also oocytes and sperm sacs of S. tapetum were surveyed at separate individuals in summer. The unique feature of A. coccinea is a body wall with simple adhesive verrucae extended from margin to limbus in longitudinal rows. In the genus Stichodactyla, the smallest species, S. tapetum is distinguished from S. haddoni by short bulbous tentacles, less than 1.0 mm long, densely packed on the oral disc and also conical marginal ones, 1.5-2.0 mm long. As a result of this study, the Korean actiniarian fauna consists of four athenarian and 23 thenarian species in suborder Nynantheae

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.6
• /
• pp.937-954
• /
• 2010

This study analyzes the body characteristics of Korean obese women using 2004 Size Korea data. For selecting the obesity sample, 7 obesity judgment indices were chosen from previous clothing-related studies. A total of 636 females defined as "obese" by 5 out of 7 indices were selected as subjects for this study. 54 body measurements and obesity judgment indices were used. First, the subjects had a BMI 27.11, R$\ddot{o}$hrer index 1.76, Vervaeck index 104.77, Relative weight 133.00, and WHR 0.90. In the case of the distribution by age groups, the twenties were 6.4% of the entire subjects, the thirties were 18.2%, the forties were 16.4%, the fifties were 37.4%, and the sixties were 21.5%. The result of the ANOVAs (divided into 5 age groups) showed significant differences in 41 measurement items except for bust circumference, waist length front, and all of obesity judgment indices. Second, according to the ANOVAs among stature groups divided by 5cm pitches there are significant differences in all measurements except for bust circumference. The results of the ANOVAs among bust circumference groups divided by 5cm pitches show that significant differences were observed in all measurements except four measurement items (including body rise). According to the ANOVAs among the waist circumference groups divided by 5cm pitches, there are no significant differences in all height measurements and shoulder length, waist to hip length, and crotch length. It is confirmed that stature and bust circumference have a deep relationship with measurements other than waist circumference. Third, as the factor analysis were conducted using 39 measurement items to extract the body characteristics of obese women Factor 1 is "circumference measurements & obesity judgment indices," Factor 2 is "heights & arm-related lengths," and Factor 3 is "size and ratio of waist circumference & hip circumference." Factor 4 was "lengths in upper body," Factor 5 was "back width in upper body," Factor 6 was "side neck point to bust & bust circumference," Factor 7 was "length in lower body & arm circumferences," and Factor 8 was "neck base circumference & front widths in upper body." These 8 factors explained 76.54% of the total variance.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.9 no.1
• /
• pp.20-29
• /
• 2004

Macrobenthos species-area relationship was investigated and empirical models were estimated to enable comparisons among species numbers of different sample size. The study aims to choose a way to predict cumulative relative species number (CRSN) in a given sample size Saemangeum, located in the west coast of South Korea, were visited in Apr., May and Aug.,2002 and a total of 261 biological samples from 87 stations were obtained by employing a quantitative sediment sampler, Smith-McIntyre grab and design of 3 replicates at each station. Relative species numbers (%) were baselined at sample size of 1000 $\textrm{cm}^2$ and the patterns of CRSN along the axis of sample size were measured and observed. In correlation analysis performed on a set of abiotic and biotic variables, log-transformed CRSN showed the only significant relationship with log-transformed density. Based on the result, three models, Log CRSN 2000, Log CRSN 3000 and Log CRSN were produced. The former two were devised to predict CRSN at 2000 and 3000 $\textrm{cm}^2$ respectively, and the latter at various sample sizes and samplers (all p-values were <0.001). Database from other studies (intertidal or subtidal macrofaunal samples from Kyonggi Bay and Saemangeum) were used to evaluate validity of the models. Observed CRSN below sample size of 3000 $\textrm{cm}^2$ fell under the range of 95% prediction interval and this was appeared to provide reliability of the models below that sample size.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.41 no.2
• /
• pp.23-32
• /
• 2004

The query optimizer's important task while a query is invoked is to estimate the fraction of records in the databases that satisfy the given query condition. The query result size estimation in spatial databases, like relational databases, proceeds to partition the whole input into a small number of subsets called “buckets” and then estimate the fraction of the input in the buckets. The accuracy of estimation is determined by the difference between the real data counts and approximations in the buckets, and is dependent on how to partition the buckets. Existing techniques for spatial databases are equi-area and equi-count techniques, which are respectively analogous in relation databases to equi-height histogram that divides the input value range into buckets of equal size and equi-depth histogram that is equal to the number of records within each bucket. In this paper we propose a new partitioning technique that determines buckets according to the maximal difference of area which is defined as the product of data ranges End frequencies of input. In this new technique we consider both data values and frequencies of input data simultaneously, and thus achieve substantial improvements in accuracy over existing approaches. We present a detailed experimental study of the accuracy of query result size estimation comparing the proposed technique and the existing techniques using synthetic as well as real-life datasets. Experiments confirm that our proposed techniques offer better accuracy in query result size estimation than the existing techniques for space query size, bucket number, data number and data size.

• Proceedings of the KIEE Conference
• /
• 2005.11b
• /
• pp.30-34
• /
• 2005

Due to old Toshiba EMS's database size limit and hardware old aging, KPX(Korea Power Exchange) had introduced New EMS from AREVA(old ALSTOM) in July 2002. After then KPX had committed many man power and time to normalize EMS NA(Network Analysis) functions for using real power system. At initial stage, to normalize State Estimator which is the backbone of all other NA functions and DTS(Dispatcher Training Simulator}, KPX had corrected numerous topology errors, network model errors, non-scanned and wrongly scanned SCADA measured errors. After SE function study, running test and tuning, State Estimator could finally have been run properly and stably from June 2003. Based on SE running, KPX had normalized real time Contingency Analysis, and study mode Power Flow, STNET and DTS. From early 2004, dispatchers have been trained to use NA and DTS for the purpose of stable SE running, NA operation & results reading and urgent equipment outage reviewing. EMS NA have been greatly contributed to operate real time power system stably. Above NA normal operation by KPX own efforts under the no experience of NA running, KPX made a good precedent. This paper is intended to introduce EMS NA normalization process, operation status, and etc in Korea power system operation.

• Journal of the Ergonomics Society of Korea
• /
• v.23 no.4
• /
• pp.35-43
• /
• 2004

The purpose of this study is to redesign a letter sorting station and to present the optimal work-space through the ergonomic analysis of the sorting station for reducing the 'Work-Related MusculoSkeletal Disorders(WMSDs)'. We surveyed the work environment in terms of the reason causing WMSDs. According to the survey results, Deltoid on the arm, Trapezius on the shoulder and Erector Spinae on the waist are most frequent attacking parts. Accordingly, We classified sorting stations by the horizontal work-space(Level 1, Level 2, Level 3) and the vertical work space(Level 1, Level 2) based on the criteria of ergonomic optimal work-space. In addition we improved the sorting station through investigation and analysis of the work-load regard the each defined work-space. In order to analyze the effect of the horizontal and vertical work-space, subjects carried out simulated sorting tasks. Each level(Level 1, Level 2, Level3) of the horizontal work-space is significant regarding each muscles(the shoulder, arm and waist), and each level(Level 1, Level 2) of the vertical work-space is significant regarding the arm and waist, but not shoulder. Finally, we founded the difference of work-load according to the work-spaces. Then, it is necessary to improve the work-space causing the high work-load(Level 3 of the horizontal work-space). Then, this study presented the specification of a sorting station which is suitable to the korean body size, and constructed the 3D shaped model of the stations by the ergonomic analysis.

• Economic and Environmental Geology
• /
• v.41 no.3
• /
• pp.359-372
• /
• 2008

A number of researches on disaster risk reduction using the most advanced equipments and scientific technologies have been performed to minimize the damage of property and to protect human life. Although the Korean government is trying to enlarge the research area for disaster risk reduction, the investment size and the applicable results in this area have stayed in the lower level comparing to other scientific fields in Korea and the same field in advanced countries. However, the National Emergency Management Agency (NEMA), a government Agency which is responsible for disaster management coordination, was established in June 2004 establishing an efficient and well-organized system to cope with various disasters. In this study, investment size by the government was evaluated and associated areas were also identified. We also analyzed the roles on research and development for disaster risk reduction among different government Ministries were analyzed and role assignment to each Ministry was proposed. The role assignment has been concreted by conducting the process of approval in the government.