• Journal of Korea Water Resources Association
• /
• v.52 no.11
• /
• pp.905-916
• /
• 2019

This study explores the effect of mother wavelet in the bivariate wavelet analysis. A total of four mother wavelets (Bump, Mexican hat, Morlet, and Paul) which are frequently used in the related studies is selected. These mother wavelets are applied to several bivariate time series like white noise and sine curves with different periods, whose results are then compared and evaluated. Additionally, two real time series such as the arctic oscillation index (AOI) and the southern oscillation index (SOI) are analyzed to check if the results in the analysis of generated time series are consistent with those in the analysis of real time series. The results are summarized as follows. First, the Bump and Morlet mother wavelets are found to provide well-matched results with the theoretical predictions. On the other hand, the Mexican hat and Paul mother wavelets show rather short-periodic and long-periodic fluctuations, respectively. Second, the Mexican hat and Paul mother wavelets show rather high scale intervention, but rather small in the application of the Bump and Morlet mother wavelets. The so-called co-movement can be well detected in the application of Morlet and Paul mother wavelets. Especially, the Morlet mother wavelet clearly shows this characteristic. Based on these findings, it can be concluded that the Morlet mother wavelet can be a soft option in the bivariate wavelet analysis. Finally, the bivariate wavelet analysis of AOI and SOI data shows that their periodic components of about 2-4 years co-move regularly every about 20 years.

• Food Engineering Progress
• /
• v.15 no.4
• /
• pp.398-403
• /
• 2011

A dielectric barrier discharge plasma (DBDP) treatment system was fabricated and the optimum operating conditions for the plasma generation were determined in order to explore the potential of cold plasma as a non-thermal proessing technology. The microbial inactivation performance of the system was also evaluated against Staphyloocus aureus. The system consisted of power supply, transformer, electrode assembly and sample treatment plate. The input power was 220 V single phase AC and amplified to 10.0-50.0 kV on a transformer. A pulsed sine wave of frequency 10.0-50.0 kHz was introduced to the electrode embedded in ceramic as a dielectric barrier material in order to generate plasma at atmospheric pressure. Higher currents and consequently greater power were required for the plasma generation as the frequencies increased. A homogeneous and stable plasma was generated at currents of 1.0-2.0, and frequencies of 32.0-35.3 kHz. The optimum electrode-gaps for the plasma generation were 1.85 mm without loaded samples. More power was consumed as the electrode-gaps increased. The practically optimum electrode- gap was, however, 2.65 mm when samples were treated on slide-glasses for microbial inactivation. The maximum temperature increase after 10 min treatment was less than 20$^{\circ}C$, indicating no microbial inactivation effect by heat and thereby insuring a non-thermal method. The DBDP inactivation effect against Staphyloocus aureus increased linearly with treatment time up to 5 min, but plateaued afterward. More than 5 log reduction was achieved by 10 min treatment at 1.25 A.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.2
• /
• pp.170-177
• /
• 2019

In this paper, three theories for improving the stability of quadruped robot are presented. First, the Minimum-Jerk Trajectory is used to optimize the leg trajectory. Second, we compare the newly proposed sine wave and the conventional LSM in this paper based on the Jerk value. Third, we calculate the optimum stride of the sway through repetitive robot simulation using ADAMS-MATLAB cosimulation. Through the above process, the improvement of the robot walking is compared with the existing theory. First, the average gradient of the point where the leg trajectory changes rapidly was reduced from at least 1.2 to 2.9 by using the Minimum-Jerk targetory for the movement of the body and the end of the leg during the first walk, thereby increasing the walking stability. Second, the average Jerk was reduced by 0.019 on the Z-axis, 0.457 on the X-axis, and 0.02, 3D on the Y-axis by 0.479 using the Sin wave type sways presented in this paper, rather than the LSM(Longitude Stability Margin) method. Third, the length of the optimal stride for walking at least the Jerk value was derived from the above analysis, and the 20cm width length was the most stable.

• Journal of Climate Change Research
• /
• v.6 no.3
• /
• pp.209-221
• /
• 2015

Temperature is one of the most important factors affecting crop growth. The diurnal cycle of the scale factor [Tsc] for air temperature and the surface temperature of crop leaf and soil could be estimated by the following equation : $[Tsc]=0.5{\times}sin(X+C)+0.5$. The daily air temperature (E[Ti]) according to the E&E time [X] can be estimated by following equation using average (Tavg), maximum (Tm) and minimum (Tn) temperature : $E[Ti]=Tn+(Tm-Tn){\times}[0.5{\times}sin\;\{X+(9.646Tavg+703.65)\}+0.5]$. The crop leaf temperature in 24th June 2014 was high as the order of red pepper without mulching > red pepper with mulching > soybean under drought > soybean with irrigation > Chinese cabbage. The case in estimating crop leaf surface temperature using air temperature and soil surface temperature was lower in the deviation compared to the case using air temperature for Chinese cabbage and red pepper. These results can be utilized for the crop models as input data with estimation.

• Journal of Korea Water Resources Association
• /
• v.52 no.8
• /
• pp.575-587
• /
• 2019

This study evaluated the effect of a mother wavelet in the wavelet analysis of various times series made by combining white noise and/or sine function. The result derived is also applied to short-memory arctic oscillation index (AOI) and long-memory southern oscillation index (SOI). This study, different from previous studies evaluating one or two mother wavelets, considers a total of four generally-used mother wavelets, Bump, Morlet, Paul, and Mexican Hat. Summarizing the results is as follows. First, the Bump mother wavelet is found to have some limitations to represent the unstationary behavior of the periodic components. Its application results are more or less the same as the spectrum analysis. On the other hand, the Morlet and Paul mother wavelets are found to represent the non-stationary behavior of the periodic components. Finally, the Mexican Hat mother wavelet is found to be too complicated to interpret. Additionally, it is also found that the application result of Paul mother wavelet can be inconsistent for some specific time series. As a result, the Morlet mother wavelet seems to be the most stable one for general applications, which is also assured by the recent trend that the Morlet mother wavelet is most frequently used in the wavelet analysis research.

• Composites Research
• /
• v.32 no.1
• /
• pp.78-84
• /
• 2019

This study focused on the prediction of the long-term performance of carbon fiber/epoxy composites using Dynamic Mechanical Analysis (DMA) and Time-Temperature Superposition (TTS). Single-frequency test, multi-frequency test, and creep TTS test were performed. A sinusoidal load of $20{\mu}m$ amplitude was applied while increasing the temperature from $-30^{\circ}C$ to $240^{\circ}C$ at $2^{\circ}C/min$ for the single-frequency test and the multi-frequency test. The frequencies applied to the multi-frequency test were 0.316, 1, 3.16, 10 and 31.6 Hz. In the creep TTS test, a stress of 15 MPa was applied for 10 minutes at every $10^{\circ}C$ from $-30^{\circ}C$ to $230^{\circ}C$. The glass transition temperature was determined by single-frequency test. The activation energy and the storage modulus curve for each temperature were obtained from glass transition temperature for each frequency by the multi-frequency test. The master curve for the reference temperature was obtained by applying the shift factor using the Arrhenius equation. Also, TTS test was used to obtain the creep compliance curves for each temperature and the master curve for the reference temperature by applying the shift factors using the manual shift technique. The master curve obtained through this process can be applied to predict the long-term performance of carbon fiber/epoxy composites for a given environmental condition.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.11
• /
• pp.71-81
• /
• 2021

The purpose of this study is liquefaction phenomenon was simulated using the 1g shaking table test. Analysis of liquefaction and Re-liquefaction behavior according to the ground conditions was analyzed when an embankment exists above the ground. The soil used in the experiment was silica sand and the ground composition was a liquefied layer of 50cm (Case 1), a non-liquefied layer of 17.5cm and a liquefied layer of 32.5cm (Case 2). The embankment was formed by fixing the height of 10cm and the slope of the slope at a ratio of 1:1.8. For seismic waves, excitation of a 5Hz sine wave was performed for 8 seconds, and a total of 5 case excitations were performed. In Case 1, it was confirmed that liquefaction occurred at all depths during the first vibration excitation at the free-field and that liquefaction did not occur at all depths except 5cm at the third vibration excitation. At the center of the embankment, liquefaction occurred up to a depth of 20cm during the first vibration excitation, and it was confirmed that liquefaction did not occur at all depths except for a depth of 5cm during the second vibration excitation.

• Journal of the Korean GEO-environmental Society
• /
• v.24 no.7
• /
• pp.5-14
• /
• 2023

Recently, earthquakes have occurred frequently in worldwide. These earthquakes cause various forms of natural and physical damage. In particular, liquefaction in which the ground shows liquid-like behavior causes great damage to the structure. Accordingly, various liquefaction damage reduction methods are being studied and developed. Therefore, in this study, a method of reducing liquefaction damage in the event of an earthquake applicable to existing structures was studied using the sheet pile method. The 1-G Shaking table test was performed and the ground was constructed with Jumunjin standard sand. A two-story model structure was produced by applying the similitude law, and the input wave applied a sine wave with an acceleration level of 0.6 g and a frequency of 10 Hz. The effect of reducing structure damage according to various embedded depth ratio was analyzed. As a result of the study, the structure settlement when the ground is reinforced by applying the sheet pile method is decreased by about 71% compared to when the ground is not reinforced, and the EDR with minimum settlement is "1". In addition, as the embedded depth ratio is increased, the calculation of the pore water pressure in the ground tends to be delayed due to the sheet pile. Based on these results, the relationship with structural settlement according to the embedded depth ratio is proposed as a relational equation with the graph. The results of this study are expected to be used as basic data in developing sheet pile methods applicable to existing structures in the future.

• Composites Research
• /
• v.19 no.5
• /
• pp.7-11
• /
• 2006

The improved SWNTs/PANi composite actuator films applicable to an artificial muscle were fabricated successfully using a new process of manufacture that consists of 90% pure single-walled carbon nanotubes (SWNT) and chemical polymerization. PANi is electrically conducting polyaniline polymer. The conductivities of the composite SWNTs/PANi film-type actuators and the pure PANi films fabricated were measured as 56.15 S/cm and 17.38 S/cm, respectively, by the 4-prove method. The conductivity of the composite actuator is 3.2 times higher than the pure PANi film. The fabricated composite actuator showed higher conductivity than any other similar ones. The quality of samples was investigated by an electron scanning microscope (SEM). To measure the actuating strains, a specially designed beam balance apparatus was developed and strains of the composite actuators was measured by a laser displacement sensor subjected to electric currents. During the operation, the sample was soaked in the $NaNO_3$ solution and the sine-wave voltage in the range of $+1V{\sim}-1V$ was applied. The length of the composite actuator changed from $l_0=12.690$ mm to $l_1=12.733$ so that the change of length was l=0.043 mm and the strain was 0.34 %. This is a very high strain for this kind of a composite actuator. Other result reported by Tahhan showed 0.23 % strain, so that the present result is improved by 48%.

• Journal of Embryo Transfer
• /
• v.16 no.3
• /
• pp.223-231
• /
• 2001

The success of nuclear transplantation with mammalian oocytes depends critically on the potential of oocytes activation, which mainly caused to prevent the re-accumulation of maturation promoting factor (MPF). This study was conducted to compare the effect of combined treatment of lonomycin with a Hl-histone kinase inhibitor (dimethylaminopurine, DMAP) or cdc2 kinase inhibitor (sodium pyrophosphate, SPP) on activation of bovine oocytes. In vitro matured bovine oocytes with the first polar body (PB) and dense cytoplasm were assigned to 3 experimental groups. For activation treatment, oocytcs were exposed to 5 $\mu$M lonomycin for 5 min (Group 1), and followed by 1.9 mM dimethylaminopurine (DMAP) for 3 h (Group 2) or followed by 2 mM sodium pyrophosphate (SPP) for 3 h (Group 3). The activation effects in the three treatments and the control group (untreated) were judged by the extrusion of the second PB and formation of a pronucleus (PN). Differences among groups were analysed using one-way ANOVA after arc-sine transformation of proportional data. All three treatments led to high activation rates (90% to 95%), with significant difference from the control. However, the extrusion of the second PB and the rate of PN formation differed remarkably among treatments. In Group I and 3, about 95% of the oocytes had extruded the second polar body, but one PN had formed in a higher proportion of oocytes in Group 3 than in Group 1 (90% vs. 5%). In experiment 2, the rates of cleavage and development into blastocysts in Group 1 were significantly lower than those of Group 2 and 3 (8.7% and 0% vs. 50.5% and 11.6%, and 44.6% and 7.2%, respectively, P<0.05). In experiment 3, ~80% of parthenotes in Group 1 were developed with haploid chromosomal sets. However, when ionomycin was followed immediately by DMAP (Group 2). only 20% of parthenotes were haploid. In Group 3, combined treatment with ionomycin and SPP, the appearance of abnormal chromosomal tracts was significantly (P〈0.05) reduced and the proportion of haploid parthenotes was increased to 85% (17/20) than in Group 2. These results demonstrate that SPP acted as a cdc2 kinase inhibitor and formed the haploidy in oocyte activation. Thus, the present study suggests that cdc2 kinase inhibitor, such as sodium pyrophosphate, may have an effective role in oocyte activation for the production of cloned embryos/animals by nuclear transplantation.