• Journal of the Korean Society of Radiology
• /
• v.10 no.1
• /
• pp.1-6
• /
• 2016

Recently, the various digital X-ray imaging devices using CCD and TFT LCD-based flat panel digital X-ray sensor are being used. In particular, a number of studies on photon counting sensor technique have been reported. In this study, the incident X-rays fluence on the photon counting sensor material was measured to estimate photon detection efficiency which is the quantitative performance evaluation factor of photon counting sensor. The result of measuring the photon fluence by using RQA-M2 Radiation beam quality of IEC 61223-1-2 recommendations, the incident photon fluence could be defined as about $4 photons/(0.01mm)^2{\cdot}{\mu}Gy$ within $10{\mu}m$ pin-hole area, and about $50photons/(0.03mm)^2{\cdot}{\mu}Gy$ within $30{\mu}m$ pin-hole area, and about $698photons/(0.1mm)^2{\cdot}{\mu}Gy$ within $100{\mu}m$ pin-hole area. Consequently, with the previously setup of the incident fluence, the measuring of actual photon counting efficiency by observing the output waveform of the photon counting sensor material was considered possible.

• Tribology and Lubricants
• /
• v.34 no.3
• /
• pp.84-92
• /
• 2018

Bearings are essential for reducing vibration and wear, in order to achieve high durability and increase longevity. White metal treatment of tilting pads via centrifugal casting method has the possibility of increasing durability. However, this manufacturing method has drawbacks such as long processing time, high defect rate, and harmful health effects. Laser cladding deposition technique is a powerful method that can address these issues by decreasing the processing time and providing good adhesion. In this study, we suggest optimum conditions for laser cladding deposition that can be used in industrial applications. We deposited a soft white metal layer on SCM440 that is primarily used in shafts to minimize wear of bearing pads. During the laser deposition process, we controlled factors such as laser power, powder feed rate, and laser head speed to determine the optimum conditions. In addition, we measured the hardness using micro Vickers, and performed field emission scanning electron microscopy, energy dispersive X-ray spectroscopy, X-ray diffraction, and friction tests to investigate the mechanical properties and surface characteristics for different parameters. Based on the experimental results, we suggest that laser power, powder feed rate, and laser head speed of 1.3 kW, 2.5 rpm, and 10 mm/s, respectively, constitute the optimum conditions for producing white metals using laser cladding.

• The Journal of the Korea Contents Association
• /
• v.10 no.4
• /
• pp.282-291
• /
• 2010

This study is carried out in order to suggest the effective method to enhance the resettlement of natives for re-maintenance promotion district of Asansi. This study is carried out through current status survey, native survey, and examining related laws, and the result of study is as follows. First, as a result of examining the intention of resettlement for the residents and merchants who live in the project district, 84% of residents and 80% of merchants wish to resettle. Second, in order to enhance the rate of resettlement, driving project to satisfy the demands of residents and merchants is needed. For this, house supplying policy and complex design technique for corresponding this tendency is needed because they prefer to live a single houses or housing attached to shopping street of 100 million won valued below as well as apartments,. And new types of business which can activate the function of the old city are needed, but making commercial space where current merchants can constantly do business activities is demanded. Third, the expansion of urban regeneration concept which have economics, society, culture, welfare and community as well as physical environment improvement are emphasized is needed. Fourth, the role of government for urban regeneration should be strengthened, and institutional improvement should be supported. Government needs to constantly support including financial supporting in order for the regeneration of regional city, and especially should scout for the policies which community can be maintained and should support first. For this, utilizing public lands inside project district into leading project, government should utilize into "constructing rental houses for natives", inducing the leading key facilities. Fifth, various plan techniques for the resettlement of natives of other advanced countries should be examined and be achieved.

• Cartoon and Animation Studies
• /
• s.49
• /
• pp.87-112
• /
• 2017

Overlap what images are laid on top of each other performs various purposes of artistic expressions. Especially, overlap to describe motion has been placed on lots of art fields analysing and connecting each part of motion. This kind of overlap is called as 'Locomotive overlap' and it is defined as 'Technique for multiplication to arrange simultaneously motions of single object on one screen'. Locomotive overlap was started from fine art and photography, so this static kind of it is classified as 'Static locomotive overlap'. Afterwards, film and animation succeeded static locomotion overlap and realized real dynamic locomotive overlap with moving images, so this dynamic kind of it is classified as 'Dynamic locomotive overlap'. Most of all, by Norman McLaren accomplished its own artistic value and aesthetics in locomotive overlap has been placed in the center of the history of locomotive overlap, so to analyze this work and to research before and after it will confirm context and artistic achievements of locomotive overlap. Nowdays locomotive overlap is extending its technology and dimension more and more on the strength of development of digital technology. Some of works using digital technology show new possibilities of locomotive overlap by reinterpreting original media and concept of . Ultimately, this research for locomotive overlap focusing on the analysis of confirms artistic achievements of locomotive overlap and suggests to contemplate the meaning and new possibilities of it.

• Journal of Korean Society of Rural Planning
• /
• v.6 no.1 s.11
• /
• pp.19-28
• /
• 2000

Now in order to overcome the weakest points of the rural areas of the city of Kimje and, transform them into rural cultural villages which have local governing systems suitable to new localization age and activate this plan, we selected Daesan Village as a model village which had shown a lot of potentials in the basic research and studied it dividing it into the former part and the latter part. We studied Daesan village in the former part focusing on state analysis and basic ideas and in the latter part focusing on master plan and detail planning. We can summarize the conclusion like the followings. 1. Daesan Village located 8 kilometer away from the downtown Kimje and the city of Iksan respectably has comparatively good environment of good sunny place as an open field whose surrounding configuration of the ground consists of farming lands and low hills in front and rear. It has 38 farming households in all. 2. Human environment(인문환경); the village road whose width is about 4 meters is forming a flow system forking off into three. There is a route bus which operates three times a day even into the inside of the village. The main sources of revenue are vegetables in facilities, fruits and floriculture. Their average revenue is about 10.5 million won. 3. Here in DaeSan Village a legend dealing with Teasan literally meaning a big mountain consist of th village's tradition and you can see the tombs of a very faithful son and Anwi an army general in the age of the Japanese Invasion of Korea of 1592 to 1598 inside the village. 4. 85 out of the eitire population 141 whose age are over 20 showed very positive attitudes in a questionnaire about, making the village a cultural one and its development. 5. The basic of planned ideas is to increase the revenue of the farming household by making the village a professional farming one which has a state-of the-art production facility and agricultural technique. It is to make the village the one where people can enjoy the sense of the rural life and the farmer can enjoy their lives through consumptive and consistant leisure and resting activities. 6. We are planning to make entrance space, life space, rest and sport space, and cultural space considering the characteristics of the village and the demand of the resident. We are also planning to make tile entire city of Kimje an information transmitting base in short and long term perspectives. 7. DaeSan Village was planned as a place where tradition and the future exist together. On the basis of this concept we planned future programs for Daesan Village and in the latter part of the study master plans and detail plans will be continued.the regional agricultural condition. The development permissions were only during the period of restricted to use ($1979.12{\sim}1993.11$). We propose that the authority of development permission should be given to the local autonomy government, because the local government has the knowledge of its individual agricultural conditions.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.433-433
• /
• 2012

As the requirement in patterning geometry continuously shrinks down, the termination of etch process at the exact time became crucial for the success in nano patterning technology. By virtue of real-time optical emission spectroscopy (OES), etch end point detection (EPD) technique continuously develops; however, it also faced with difficulty in low open ratio etching, typically in self aligned contact (SAC) and one cylinder contact (OCS), because of very small amount of optical emission from by-product gas species in the bulk plasma glow discharge. In developing etching process, one may observe that coupon test is being performed. It consumes costs and time for preparing the patterned sample wafers every test in priority, so the coupon wafer test instead of the whole patterned wafer is beneficial for testing and developing etch process condition. We also can observe that etch open area is varied with the number of coupons on a dummy wafer. However, this can be a misleading in OES study. If the coupon wafer test are monitored using OES, we can conjecture the endpoint by experienced method, but considering by data, the materials for residual area by being etched open area are needed to consider. In this research, we compare and analysis the OES data for coupon wafer test results for monitoring about the conditions that the areas except the patterns on the coupon wafers for real-time process monitoring. In this research, we compared two cases, first one is etching the coupon wafers attached on the carrier wafer that is covered by the photoresist, and other case is etching the coupon wafers on the chuck. For comparing the emission intensity, we chose the four chemical species (SiF2, N2, CO, CN), and for comparing the etched profile, measured by scanning electron microscope (SEM). In addition, we adopted the Dynamic Time Warping (DTW) algorithm for analyzing the chose OES data patterns, and analysis the covariance and coefficient for statistical method. After the result, coupon wafers are over-etched for without carrier wafer groups, while with carrier wafer groups are under-etched. And the CN emission intensity has significant difference compare with OES raw data. Based on these results, it necessary to reasonable analysis of the OES data to adopt the pre-data processing and algorithms, and the result will influence the reliability for relation of coupon wafer test and whole wafer test.

• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.5
• /
• pp.590-603
• /
• 2006

Size-and time-resolved aerosol samples were collected using an eight-stage Davis rotating unit for monitoring (DRUM) sampler from 23 March to 29 April 2001 at Gosan, Jeju Island, Korea, which is one of the super sites of Asia-Pacific Regional Aerosol Characterization Experiment(ACE-Asia). These samples were analyzed using synchrotron X-ray fluorescence for 3-hr average concentrations of 19 elements including Al, Si, S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, As, Se, Br, Rb, and Pb. The size-resolved data sets were then analyzed using the positive matrix factorization(PMF) technique to identify possible sources and estimate their contributions to particulate matter mass. PMF analysis uses the uncertainty of the measured data to provide an optimal weighting. Twelve sources were resolved in eight size ranges($0.09{\sim}12{\mu}m$) and included continental soil, local soil, sea salt, biomass/biofuel burning, coal combustion, oil combustion, municipal incineration, nonferrous metal source, ferrous metal source, gasoline vehicle, diesel vehicle, and volcanic emission. The PMF result of size-resolved source contributions showed that natural sources represented by local soil, sea salt, continental soil, and volcanic emission contributed about 79% to the predicted primary particulate matter(PM) mass in the coarse size range ($1.15{\sim}12{\mu}m$) while anthropogenic sources such as coal combustion and biomass/biofuel burning contributed about 58% in the fine size range($0.56{\sim}2.5{\mu}m$). The diesel vehicle source contributed mostly in ultra-fine size range($0.09{\sim}0.56{\mu}m$) and was responsible for about 56% of the primary PM mass.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.62 no.4
• /
• pp.33-43
• /
• 2020

In order to reduce damage from farmland inundation caused by recent climate change, it is necessary to predict the risk of farmland inundation accurately. Inundation modeling should be performed by considering multiple time distributions of possible rainfalls, as digital forecasts of Korea Meteorological Administration is provided on a six-hour basis. As building multiple inputs and creating inundation models take a lot of time, it is necessary to shorten the forecast time by building a data base (DB) of farmland inundation probability. Therefore, the objective of this study is to establish a DB of farmland inundation probability in accordance with forecasted rainfalls. In this study, historical data of the digital forecasts was collected and used for time division. Inundation modeling was performed 100 times for each rainfall event. Time disaggregation of forecasted rainfall was performed by applying the Multiplicative Random Cascade (MRC) model, which uses consistency of fractal characteristics to six-hour rainfall data. To analyze the inundation of farmland, the river level was simulated using the Hydrologic Engineering Center - River Analysis System (HEC-RAS). The level of farmland was calculated by applying a simulation technique based on the water balance equation. The inundation probability was calculated by extracting the number of inundation occurrences out of the total number of simulations, and the results were stored in the DB of farmland inundation probability. The results of this study can be used to quickly predict the risk of farmland inundation, and to prepare measures to reduce damage from inundation.

• Journal of Korean Society of Forest Science
• /
• v.104 no.1
• /
• pp.43-49
• /
• 2015

The production of high quality seedlings is a very important phase in silvicultural systems for successful reforestation or restoration. The purpose of this study was to quantitatively measure both growth performances and nutrient responses of Fraxinus rhynchophylla, Pinus densiflora, and Pinus koraiensis seedlings, which are commercially planted in Korea, according to the different types of soil improvement treatments. We applied soil brought (hereafter 'brought'), subsoil inversion (hereafter 'subsoil'), and mixture of brought soil with soil on nursery bed (hereafter 'mixing') in a permanent national nursery. Silt and clay contents were the highest at the subsoil treatment and organic material, soil nitrogen and phosphorus concentrations were the lowest at the brought treatment. The growth of F. rhynchophylla was the lowest at the subsoil treatment, but there were no significant differences among treatments. There were significant differences in only root nutrient concentrations of F. rhynchophylla among treatments: nitrogen, phosphorus, and potassium concentrations were the lowest at the subsoil or brought treatment. Mixing treatment increased N contents with deduction of N concentrations ('dilution') because of more dry weight increase compared with the amount of N uptake. This study suggested mix of brought soil with soil on a nursery bed in a permanently used nursery can economically be an effective technique to improve soil quality.

• Korean Journal of Environment and Ecology
• /
• v.19 no.2
• /
• pp.150-161
• /
• 2005

Soraksan National Park and Odaesan National Park, that are 20.7 km apart, should play an important role as habitats and corridors for wildlife because they are located in the center of Baekdudaegan. However, landscape features such as small area, fragmentation, and geographic isolation seem to impede the proper ecological functions of these two national parks. Using GIS technique, we examined the pattern of fragmentation in these two national parks and adjacent regions (Sokcho-si, Goseong-gun, Inje-gun, Yangyang-gun, and Hongcheon-gun) encompassing a total of $4573.5km^2$ in area. We then selected the patches suitable for an endangered carnivorous species, leopard cat, based on habitat conditions, and identified the network and stepping stone among patches to enable leopard cats to migrate. Diverse roads and artificial facilities in the study area generated a total of 24,701 patches: 39 patches among these were selected as potential habitats upon considering the habitat condition such as vegetation types and minimum area for leopard cat. Three patches nearby Gyebangsan and Bangtaesan were identified as a potential network center to relieve the effects of fragmentation and isolation of the two national parks. Our results also showed that patches containing Jombongsan and Bangtaesan would act as a source patch from there leopard cats can disperse to both national parks. It is an urgent task to identify the pattern of fragmentation and the connectivity between patches in national parks and adjacent areas for wildlife conservation because almost all national parks confront land- scape problems similar to the two national parks examined in this study.