• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 추계 학술논문 발표대회
• /
• pp.31-32
• /
• 2018

Lately, cement mixed siliceous powder waterproofing coating has been used as a waterproofing material in the wet environment condition of an underground concrete structure. Underground is exposed to environmental influences such as pressure of ground water, pressure of soil. However, the quality standard for pressure (water pressure, earth pressure) is not specified in the specification of the cement mixed siliceous powder waterproofing coating. Therefore, in this study, the permeability test was carried out based on the assumption that the durability should be verified in consideration of the environmental aspects of the material in actual field. As a result of the test, the permeability was generated from the inorganic single type material, but it was caused by the sealing failure and the test error, and the permeability was not generated in most of the materials. The results of this study will be analyzed by reviewing the physical properties of the material, and the research direction will be resumed.

• Structural Engineering and Mechanics
• /
• 제74권1호
• /
• pp.83-90
• /
• 2020

Several classical and higher order plate theories were used to study the buckling of functionally graded material (FGM) plates. In the great majority of research, a power function is used to represent metal and ceramic material transverse distribution (P-FGM). Therefore, the effect of having other transverse variation of material properties on the buckling behavior of thick rectangular FGM plates was not properly addressed. In the present work, this effect is investigated using the Third order Shear Deformable Theory (TSDT) for the case of simply supported FGM plate. Both a sigmoid function and an exponential functions are used to represent the transverse gradual property variation. The plate governing equations are combined with a Navier type expanded solution of the unknown displacements to derive the buckling equation in terms of the pre-buckling in-plane loads. Finally, the critical in-plane load is calculated for the different buckling modes. The model is verified by a comparison of the calculated buckling loads with available published results of Al-SiC P-FGM plates. The conducted parametric study shows that manufacturing FGM plates with sigmoid variation of properties in the thickness direction increases the buckling load considerably. This improvement is found to be more significant for the case of thick plates than that of thin plates. Results also show that this stiffening-like effect of the sigmoid function profile is more evident for cases where the in-plane loads are applied along the shorter edge of the plate.

• 한국재료학회지
• /
• 제17권5호
• /
• pp.263-267
• /
• 2007

Hafnium oxide $(HfO_2)$ films were deposited on Si(100) substrates by remote plasma-enhanced atomic layer deposition (PEALD) method at $250^{\circ}C$ using TEMAH [tetrakis(ethylmethylamino)hafnium] and $O_2$ plasma. $(HfO_2)$ films showed a relatively low carbon contamination of about 3 at %. As-deposited and annealed $(HfO_2)$ films showed amorphous and randomly oriented polycrystalline structure. respectively. The interfacial layer of $(HfO_2)$ films deposited using remote PEALD was Hf silicate and its thickness increased with increasing annealing temperature. The hysteresis of $(HfO_2)$ films became lower and the flat band voltages shifted towards the positive direction after annealing. Post-annealing process significantly changed the physical, chemical, and electrical properties of $(HfO_2)$ films. $(HfO_2)$ films deposited by remote PEALD using TEMAH and $O_2$ plasma showed generally improved film qualities compare to those of the films deposited by conventional ALD.

• 한국자기학회지
• /
• 제5권4호
• /
• pp.251-260
• /
• 1995

Co계 비정질 강자성 합금을 1 Oe 이하의 작은 자장 중에서 큐리 온도 이하로 열처리하면 재현성 있는 비대칭 자기이력곡선이 얻을 수 있다는 사실이 보고된 바 있다. 열처 리시 자장의 방향을 (+)라고 하면 (+)에서 (-)에로의 자화반전은 단 한 번의 비가역적 인 Barkhausen jump에 의해서 이루어지며, (-)에서 (+)로의 자화반전은 완만하고 가역 적이다. 이때 이력곡선의 기울기는 시료의 반자장에 의해 결정된다. 이러한 현상을 비 대칭 자화반전이라 한다. 이력곡선의 모양과 재현성은 열처리시 가하는 자장의 크기, 열처리 온도와 시간, 열처리 분위기 등 열처리 조건과 합금의 조성에 따라 크게 바뀐다. 본 연구는 영자왜 조성인 (Fe/sub 0.06/Co/sub 0.94/)/sub 75/Si/sub 10/B/sub 15/ 비 정질 자성 합금을 100 mOe의 자장하에서 열처리할 때 열처리 온도와 시간이 비대칭 자 화반전에 미치는 영향에 대한 것이다. 자화 반전 효과는 비교적 높은 온도에서 짧은 시간에 생성되나 열처리 시간이 길어질수록 안정화된다.

• KIEAE Journal
• /
• 제2권1호
• /
• pp.3-10
• /
• 2002

The purpose of this study is make a proposal for application skill of Ecological communal. Ecological communal is Environmentally friendly lifestyle and an alternative plan of Environmental pollution. There is growing international scientific consensus that human activities are having a discernible effect on the global climate. The environment was polluted the cause by The Development of scientific technique and economy. Recently, Environmental pollution spreads through over the world over. Moreover, An increasing gulf between the rich and the poor. In result, rise to the emergency in cooperation with the whole world. We need to advance a new direction for society to take in order to suffer environmental problems which have emerged as the most serious. The development of ecological communal is directed toward realizing a sustainable society. If life styles are to become less dependent on ecological resources and reduce externalities, same as Ecological communal, then a wide range of renewable energy technologies and energy saving measures are required. Up to now, the development of ecological communal has been actively initiated and still continues by some venture farmers whit a vision and strong will. These study results are definitely very conducive to spread ecological communal knowledge among the public.

• 전력전자학회논문지
• /
• 제25권3호
• /
• pp.195-203
• /
• 2020

This paper presents a parasitic inductance reduction design method for the stable driving of GaN HEMT. To reduce the parasitic inductance, we propose a vertical lattice loop structure with multiple loops that is not affected by the GaN HEMT package. The proposed vertical lattice loop structure selects the reference loop and designs the same loop as the reference loop by layering. The design reverses the current direction of adjacent current paths, increasing magnetic flux cancellation to reduce parasitic inductance. In this study, we validate the effectiveness of the parasitic inductance reduction method of the proposed vertical lattice loop structure.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.355-358
• /
• 2000

Magnetoresistance changes of NiFe thin films were investigated as a function of deposition temperature. DC magnetron sputtering was employed to fabricate Ta/NiFe(t)/Ta thin films on Si(001) substrates with in-situ field or with no-field. The thickness(t) of NiFe films was a range of 4 to 15nm. Substrate temperature was a range of 30 to 400$^{\circ}C$. MR measurement was carried out as a function of angle $\theta$, between external field and current direction. MR ratio increased with increasing substrate temperature, also, max. MR ratio was observed in samples deposited at 300$^{\circ}C$. With increasing upto 400$^{\circ}C$, MR ratio was rapidly decreased in the case of thinner NiFe films. In non-field deposited NiFe films, both angle $\theta$=0, 90。, there was no significant change in MR curves. However, MR curves of in-situ field deposited NiFe films were different in both angles $\theta$=0 and 90。

• Design & Manufacturing
• /
• 제10권2호
• /
• pp.6-11
• /
• 2016

Designed patterns of slit are introduced to the uni-directional (UD) prepreg in order to enhance the formability of the carbon/epoxy composites without wrinkling and laddering. Three different types of the slit alignment along the thickness direction are applied to analyse the deformation behavior during the compression moulding process of laminates. Degrees of the slit open and the mechanical strength are evaluated based on the level of the compaction pressure in the course of forming process. Results have shown that the mechanical strength of laminates having slits could attain at least 80% of the conventional ones without slits. However, further studies are required to identify the direct relevance of the slit alignment in laminate to the mechanical properties.

• International Journal of Automotive Technology
• /
• 제4권3호
• /
• pp.109-117
• /
• 2003

The analysis and evaluation of the transient performance by the transient response specifications under various acceleration speeds and types based on driver's typical acceleration habit are implemented by the experimental study to provide the appropriate direction for the transient control in a gasoline engine. The concept of the transient response specifications which consist of delay time, rising time, maximum overshoot and settling time, and the analysis method using them are introduced to evaluate the characteristics of the transient performance quantitatively. Furthermore four acceleration speeds and four acceleration types are set respectively to realize the various transient states which are similar to the real drive. Several performance parameters in terms of engine speed, manifold absolute pressure, fuel injection duration and air excess ratio are measured simultaneously during the various acceleration using a throttle actuator controlled by a PC. The transient response specifications characterized well the transient performance for the various acceleration speed and types quantitatively. Delay and rising time with increment of the acceleration speed became shorter, but settling time did longer. Intensified acceleration type appeared to be the most economical in view of fuel consumption, and linear acceleration type was found to have the least harmful emission concentration.

• 품질경영학회지
• /
• 제44권1호
• /
• pp.29-42
• /
• 2016

Purpose: This paper reviews the papers on reliability issues which are published in the Journal of the Korean Society for Quality Management (KSQM) since 1965. The literature review is purposed to survey a variety of reliability issues for several categories Methods: We divide all of reliability issues into 9 categories: acceleration test, reliability estimation, system reliability, software reliability, reliability data collection and analysis method, lifetime distribution, maintenance and warranty strategy, reliability applications, and reliability applications to military area Results: Dividing all of papers on reliability published in KSQM for 50 years into 9 categories, we provide a chronological roadmap for individual categories, and summarize the contents and contributions of surveyed papers Conclusion: The review paper is expected to provide future direction to improve reliaiblity theories and applications in manufacturing and service industries