• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.6
• /
• pp.1035-1041
• /
• 2011

Salinity of soil under the plastic film houses in Korea is known as a significant factor to lower the crop production and to hamper the sustainable agricultural land management. In this study we propose a field monitoring technique to examine the methods applied to minimize the adverse effect of salts in soil based on the relationship between soil electrical characteristics and soil properties. Field experiments for 4 different treatments (water only, fertilizer only, DTPA only, and DTPA and fertilizer together) were conducted on soils at the plastic film house built for cultivating a cucumber plant located at Chunan-si, Chungchungnam-do in Korea. The electrical resistivity was measured by both a dipole-dipole and wenner multi-electrodes array method. After the electrical resistivity measurement we also measured the soil water content, temperature, and electrical conductivity on surface soil. The resulted image of the interpreted resistivity by the inversion technique presented a unique spatial distribution depending on the treatment, implying the effect of the different chemical components. It was also highly suspected that resistivity response changed with the nutrients level, suggesting that our proposed technique could be the effective tool for the monitoring soil water as well as nutrient during the cropping period. Especially, subsoils under DTPA treatment at 40 to 60 cm depth typically presented lower soil water accumulation comparing to subsoils under non-DTPA treatment. It is considered that DTPA resulted in increase of a root water uptake. However, our demonstrated results were mainly based on qualitative comparison. Further experiments need to be conducted to monitor temporal changes of electrical resistivity using time lapse analysis, providing that a plant root activity difference based on changes of soil water and nutrients level in time.

• Journal of Internet of Things and Convergence
• /
• v.7 no.3
• /
• pp.9-14
• /
• 2021

This paper discovers the energy loss factors through the insulation diagnosis of houses or buildings, and proposes directions for energy efficiency improvement. The energy efficiency factor of a building consists of insulation diagnosis, thermal bridge diagnosis, window diagnosis, airtight diagnosis, and equipment diagnosis. Among the residents and facilities in the energy welfare blind spot, an energy efficiency diagnosis was conducted for one senior citizen building located in Naju-si, Jeollanam-do, and energy efficiency diagnosis was conducted after insulation was installed. Energy measurement, diagnosis and analysis were performed using the IoT-based integrated wired/wireless energy diagnosis platform, Energy Finder. As a result of comparison, an overall energy saving rate of 16.38% was achieved. Annual heating energy consumption per unit area decreased from 333.51kWh before construction to 277.35kWh after construction, and annual cooling energy consumption per unit area decreased from 5.51kWh before construction to 5.22kWh after construction. The annual primary energy consumption per unit area decreased from 464.52kWh before construction to 403.69kWh after construction, and the annual energy cost was reduced from 3,063,307.14 won before construction to 2,641,072.49 won after construction. The additional improvement work is needed on the standards affecting energy efficiency other than insulation.

• Journal of Korean Society of Forest Science
• /
• v.110 no.4
• /
• pp.689-710
• /
• 2021

The purpose of this study was to analyze contents of the elementary school textbooks on 'Forest Education' based on the 2015 revised curriculum. This study is designed to determine the status of forest educationrelated content in the curriculum. Thetypesofforesteducationintextbooksweredividedintoanalysis. In addition, the standards of achievement of the curriculum were analyzed into the areas of forest education curriculum to determine the similarities between the curriculum and the achievement of forest education. This study shows that, first, the field of knowledge in forest education was included in all subjects and grades except mathematics. It noted that the curriculum includes areas of knowledge that directly convey knowledge related to forest education. This showed that the forest education knowledge area is linked to various courses. Second, the types of forest education included in the curriculum appeared differently depending on age. In the lower grades, there was the most information on the tools and sensibilities of forest education, and in the higher grades, the more knowledge and value-related areas were addressed. As the school year increases, so do forest education levels. Third, when analyzing the achievement criteria in the curriculum, the curriculum achievement criteria included key points in forest education. Thus, this study confirmed the link between the curriculum and forest education.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.4
• /
• pp.553-560
• /
• 2021

In this study, cement clinker using a pure sample and clinker using 7% coal ash were sintered at a temperature of 1050~1500℃. Changes in the content of cement minerals and changes in microstructure by sintering temperature were reviewed. The application of coal ash as a raw material for cement clinker was applicable as a source of Al₂O₃ and SiO₂. At a sintering temperature of 1350℃ or higher, the cement clinker applied with coal ash showed the same level of mineral content as compared to the cement clinker applied with pure raw material. The microstructure also showed a similar state, confirming that coal ash can be used as a raw material for cement. In XRD-Reitveld analysis, a maximum amount of Belite was produced at 1250℃. The conversion from Belite to Alite was observed from 1350℃. From 1350℃, the interstitial phase and the mineral phase presumed to be alite were distinguished. It was clearly distinguished from 1400℃. As the sintering temperature increased, the shape and boundary of the crystal phase became clear, and the size of the crystal phase was also increased.

• Journal of Navigation and Port Research
• /
• v.45 no.6
• /
• pp.346-351
• /
• 2021

With the goal of eradicating overwork, overload, and speeding of general freight cars(cargo) by the Ministry of Land, Infrastructure and Transport, Infrastructure and Transport, the "The Fare of safe transportation for freight cars System" has been enforced since 2020. 'The Fare of safe transportation for freight cars' rate for each item is being applied and supplemented, but the 'The Cost of safe transportation for freight cars' of general freight cars (cargo) and steel items is under discussion. The purpose of this study was to estimate the willingness to pay( WTP) for cargo. A survey was conducted on shippers, transportation companies (arrangers, carriers), and cargo drivers (using direct questioning among contingent valuation method (CVM) and the Tobit Regression analysis was conducted, and the average and median values of freight rates were derived using the estimated results, and the willingness to pay by tonnage of freight cars was confirmed. It is expected that the results of this study can be used as a reference to the "The Fare of safe transportation for freight cars Committee" an organization for deliberation and resolution of the 'The Cost of safe transportation for freight cars'.

• Korean Journal of Remote Sensing
• /
• v.37 no.2
• /
• pp.305-319
• /
• 2021

The overseas calibration sites such as Mongolia used for Korea Multi-purpose Satellite (KOMPSAT-5 or K5), have a disadvantage in that maintenance and repair costs are high and immediate response is difficult when an unexpected problem occurs. Accordingly, the necessity of establishing a domestic SAR calibration site was suggested, but the progress of related research is insignificant. In this paper, we investigated what conditions should be satisfied in terms of backscattering characteristics to construct a site for SAR satellite image quality evaluation and calibration. First of all, it was selected first by applying general indicators such as accessibility and availability among places recommended as satellite image calibration candidate sitesin Korea. Next, three places, site A (Goheung-gun, Jeollanam-do), site B (Jeonju-si, Jeollabuk-do), and site C (Daedeok Research Complex, Daejeon), were selected as the final candidates because they are relatively wide and easy to install AT or CR. Site A, located in Goheung-gun, Jeollanam-do, was best considered in terms of slope measurements, minimum site area to obtain ISLR, uniformity of DN values and backscatter coefficients, interference by strong reflectors, and backscatter clutter level.

• 기호학연구
• /
• no.57
• /
• pp.59-90
• /
• 2018

This paper examines the discussions related to image and signification through the theories of Roland Barthes. We have already been able to see through the studies of Semiotics and Anne H?nault that the denotation is distinguished from the connotation in the linguistic dimension. Through the analysis of the advertising image of Barthes, we have seen that the syntagmatic relationship can make the sense of the image objective. From this study, we also emphasized that it is possible to subjectively interpret images that deviate from the syntagmatic relationship. In addition, we examined the concepts of Studium and Punctum by Barthes. With this we have found that the definition of a personal meaning to objects has a theoretically clear position. Finally, we have been able to understand the concept of 'le sens obtus' through the article ${\ll}$ Le troisi?me sens ${\gg}$. The notion of 'sens obtus' makes it possible to realize that the objective and clear sense of object is not the one chosen primarily from the subject. By facing an object such as an image to be interpreted, the subject is placed in a situation where he is not compelled to choose a meaning but rather he chooses one of the possible senses. This makes it clear that the semantic levels provided by semiotic theories are limited to the analytic dimension.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.1-7
• /
• 2018

In a microcolumn, a miniaturized electrostatic deflector is often adopted to scan an electron beam. Usually, a double octupole deflector is used because it can avoid excessive spherical aberrations by controlling the electron beam path close to the optical axis of the objective lens and has a wide scan field. Studies on microcolumns have been performed to improve the low throughput of an electron column through multiple column applications. On the other hand, as the number of microcolumns increases, the number of wires connected to the components of the microcolumn increases. This will result in practical problems during the process of connecting the wires to electronic controllers outside of the vacuum chamber. To reduce this problem, modified quadrupole and octupole deflectors were examined through simulation analysis by selecting an ultraminiaturized microcolumn with the Einzel lens eliminated. The modified deflectors were designed changing the size of each electrode of the conventional Si octupole deflector. The variations of the scan field and electric field strength were studied by changing the size of active electrodes to which the deflection voltage was to be applied. The scan field increased linearly with increasing deflection voltage. The scan field of the quadrupole deflector and the electric field strength at the center were calculated to be approximately 1.3 ~ 2.0 times larger than those of the octupole deflector depending on the electrode size.

• Journal of Food Hygiene and Safety
• /
• v.34 no.1
• /
• pp.52-57
• /
• 2019

Method development and validation of decursin for the standardization of Angelica gigas Nakai as a functional ingredient and health food were accomplished. The quantitative determination method of decursin as a marker compound of aerial parts of Angelica gigas Nakai extract (AAGE) was optimized by HPLC analysis using a C18 column ($3{\times}150mm$, $3{\mu}m$) with 0.1% TFA in water and acetonitrile as the mobile phase at a flow rate of 0.5 mL/min and detection wavelength of 330 nm. The HPLC/PDA method was applied successfully to quantification of the marker compound in AAGE after validation of the method with linearity, accuracy, and precision. The method showed high linearity in the calibration curve at a coefficient of correlation ($R^2$) of 0.9994 and the limit of detection and limit of quantitation were $0.011{\mu}g/mL$ and $0.033{\mu}g/mL$, respectively. Relative standard deviation (RSD) values of data from intra- and inter-day precision were less than 1.10% and 1.13%, respectively. Recovery of decursin at 0.5, 1, 5 and $10{\mu}g/mL$ were 92.38 ~ 104.11%. These results suggest that the developed HPLC method is very useful for the determination of marker compound in AAGE to develop a health functional material.

• Korean Chemical Engineering Research
• /
• v.56 no.6
• /
• pp.841-855
• /
• 2018

The purpose of this study is to estimate the available potential heat source for heat pump in the district heating supply area in the city. Unused energy potentials were estimated and integrated based on open source based data. In particular, geographical spatial analysis of recoverable heat energy density and heat demand in the heat source area of large retailers and public sauna facilities in the DH network located in the southern part of the metropolitan area (Pyeongtaek-si) was conducted. As a result of the study, the DH network area had a total potential energy of 1,741.7 toe/year for the two heat sources of large retailers and public saunas. It is estimated that 1,006.9 toe/year, which is 57.8% of the total, can be linked to the district heating. The large retailers showed a positive correlation with the floor area and energy use of 0.4937. The recoverable energy intensity was estimated to be $0.0017toe/m^2$ per unit area and $0.0069tCO_2/m^2$ for greenhouse gas emissions. In addition, public saunas were analyzed by comparing the empirical case with the theoretical calculation, and it was estimated that energy conservation estimate of 80% was $0.0315toe/m^2$ per bath area and $0.1183tCO_2/m^2$ for greenhouse gas emissions. The total potential energy amount of this area was positively correlated with the heat demand of apartment house by administrative district, and it was confirmed that it had a relatively high potential energy especially in traffic and commercial center.