• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.185-188
• /
• 2008

플랫 플레이트 시스템은 펀칭전단과 같은 구조적 취약점이 있다. 펀칭전단의 저항력은 기둥단면의 증가, 슬래브 유효춤의 증가, 콘크리트 강도의 증가, 휨철근의 증가로 증가시킬 수 있다. 그러나 전단보강체를 설치하는 방법이 경제적, 시공적, 안정적으로 가장 좋은 방법이다. 하지만 슬래브 두께가 250mm보다 작은 슬래브에서는 전단보강체의 충분한 정착길이를 확보할수 없기 때문에 충분한 정착효과를 발휘하기 힘들다. 이전 연구에서 제안된 전단보강체의 경우 상부철근과 하부철근의 사이에 설치되었기 때문에 전단철근의 항복강도에 도달하기 전에 미끄러짐 파괴가 발생하였다. 정착강도의 영향을 주는 요인으로는 유효정착길이, 콘크리트강도, 전단철근의 직경, 정착상세이다. 본 연구에서는 슬래브 두께와 콘크리트 강도를 고려하여 제안된 보강체의 강도산정시 K factor를 제안하였다. 정착길이와 콘크리트강도를 고려함으로써 두께가 얇은 플랫플레이트 슬래브내에서 전단철근에 의한 전단강도를 정확히 산정할수 있을 것으포 판단된다..

• 한국지반공학회논문집
• /
• 제19권6호
• /
• pp.7-14
• /
• 2003

본 연구에서는 굴패각 혼합토의 전단강도 특성을 파악하고자 해성토에 굴패각 혼합율 0%, 25% 그리고 50%로 달리 한 후 $K_o$ 비배수 삼축압축 실험을 실시하였다. 또한 각 혼합비에 따라 유효 연직압을 200kPa, 300kPa 그리고 400kPa로 적용하였고, 유효 연직압 300kPa에 대해서 전단속도를 세가지로 달리하여 그에 따른 혼합토의 전단강도 특성을 알아보았다. 일련의 실험결과로부터 굴패각 혼합비가 증가할수록 굴패각 입자의 파쇄로 인해 전단강도가 증가함을 볼 수 있었으며, 전단속도는 굴패각 혼합토의 전단강도에 큰 영향을 미치지 못함을 확인하였다. 굴패각 혼합토의 실내실험과 Mayne, Bishop의 경험식을 토대로 비교 분석한 결과 비배수 전단강도는 실험값과 비슷한 경향을 나타내고 있다. 그러나 간극수압계수 예측은 혼합비 0%에서 경험식이 실험값과 보다 과대 평가를 보이고 있다.

• 대한치과기공학회지
• /
• 제41권3호
• /
• pp.177-185
• /
• 2019

Purpose: This study was to investigate the effect of three different surface treatments on the shear bond strength of lithium disilicate ceramics to enamel. Methods: Totally 60 lithium disilicate ceramic disc specimens were fabricated with IPS e.max press (Ivoclar Vivadent, Schaan, Liechtenstein) and Mazic Claro (Vericom, Korea). 30 specimens in each lithium disilicate ceramic were assigned to 3 groups of the each following surface treatment: 1) $50{\mu}m$ airborne particle abrasion+silane, 2) 9.5% hydroflouric acid etching (HF)+silane, 3) $50{\mu}m$ airborne particle abrasion+9.5% HF+silane. Lithium disilicate ceramic surfaces after surface treatments were AFM examined. The shear bond strength was measured in a universal testing machine at 0.5mm/min crosshead speed. All data were analyzed using a two-way ANOVA and Tukey's test(${\alpha}=0.05$). Results: The mean surface roughness of lithium disilicate ceramics ranged from $0.178{\mu}m$ to $0.441{\mu}m$. The mean shear bond strengths ranged from $23.81{\pm}2.78MPa$ to $33.99{\pm}4.85MPa$. Conclusion: 1. Mazic Claro showed higher shear bond strength than IPS e.max press at 3 different surface treatments, and no statistically significant was observed. 2. The shear bond strength of IPS e.max press was strongly enhanced as surface treated with $50{\mu}m$ airborne particle abrasion and 9.5% hydroflouric acid etching. And there was no statistical significance at the shear bond strength of Mazic Claro with surface treatments.

• Steel and Composite Structures
• /
• 제42권4호
• /
• pp.539-552
• /
• 2022

Concentrically braced frames (CBFs) possess high stiffness and strength against lateral loads; however, they suffer from low energy absorption capacity against seismic loads due to the susceptibility of CBF diagonal elements to bucking under compression loading. To address this problem, in this study, an innovative damper was proposed and investigated experimentally and numerically. The proposed damper comprises main plates and includes a flange plate angled at θ and a trapezius-shaped web plate surrounded by the plate at the top and bottom sections. To investigate the damper behaviour, dampers with θ = 0°, 30°, 45°, 60°, and 90° were evaluated with different flange plate thicknesses of 10, 15, 20, 25 and 30 mm. Dampers with θ = 0° and 90° create rectangular-shaped and I-shaped shear links, respectively. The results indicate that the damper with θ = 30° exhibits better performance in terms of ultimate strength, stiffness, overstrength, and distribution stress over the damper as compared to dampers with other angles. The hysteresis curves of the dampers confirm that the proposed damper acts as a ductile fuse. Furthermore, the web and flange plates contribute to the shear resistance, with the flange carrying approximately 80% and 10% of the shear force for dampers with θ = 30° and 90°, respectively. Moreover, dampers that have a larger flange-plate shear strength than the shear strength of the web exhibit behaviours in linear and nonlinear zones. In addition, the over-strength obtained for the damper was greater than 1.5 (proposed by AISC for shear links). Relevant relationships are determined to predict and design the damper and the elements outside it.

• Geomechanics and Engineering
• /
• 제31권5호
• /
• pp.519-527
• /
• 2022

Shear failure in soil is the primary cause of most geotechnical structure failures or instability. Soil water content is a significant factor affecting soil shear strength. In this study, the shear strength of samples with different water contents was tested. The shear strength, cohesion, and internal friction angle decreased with increasing water content. Based on the variation of cohesion and internal friction angle, the water content zone was divided into a high-water content zone and low-water content zone with a threshold water content of 15.05%. Cohesion and internal friction angle have a good linear relationship with water content in both zones. Environmental Scanning Electron Microscopy (ESEM) test presented that the aggregates size of the compacted loess gradually increases with increasing water content. Meanwhile, the clay in the compacted loess forms a matric that envelops around the surface of the aggregates and fills the inter-aggregates pores. A quantitative analysis of bound water and free water under different water contents using a nuclear magnetic resonance (NMR) test was carried out. The threshold water content between bound water and free water was slightly below the plastic limit, which is consistent with the results of shear strength parameters. Combined with the T2 distributions obtained by NMR, one can define a T2 relaxation time of 1.58 ms as the boundary point for bound water distribution without free water. Finally, the effects of bound water and free water on shear strength parameters were analyzed using linear regression analysis.

• 대한토목학회논문집
• /
• 제28권2A호
• /
• pp.187-196
• /
• 2008

이 연구에서는 단순 트러스 모델을 이용한 철근콘크리트 바닥판의 펀칭전단강도 평가방안을 제안하였다. 철근콘크리트 바닥판의 펀칭전단 해석의 본질적인 어려움을 극복하기 위해 집중하중이 작용하는 바닥판을 펀칭전단 파괴 형태에 기초하여 펀칭콘과 나머지 부분의 소구조체로 구분하였다. 펀칭콘의 강도는 이상화한 트러스의 경사압축부재의 강성도로써 유도되었다. 수평변위를 제어하고 있는 롤러지점의 수평방향 스프링 부재의 강성도는 펀칭콘 내에 포함된 철근에 의하여 결정되었다. 3차원 구조물의 2차원화에 따른 오차와 해석과정에 포함되지 않은 나머지 소구조체의 강성도 등에 기인하는 불확실성들을 포함하기 위하여 경사압축재의 초기각은 실험결과들에 대해 주인장 철근비를 변수로 수행된 회귀분석을 통하여 구하였다. 단순 트러스 모델로부터 구한 펀칭전단강도는 실험결과와의 비교에서 신뢰성이 높은 것으로 나타났다. 단순 트러스 모델의 스냅스로우(snap-through)좌굴해석으로부터 구한 펀칭전단강도는 철근콘크리트 바닥판의 펀칭전단강도의 검토에 유용하게 사용될 수 있을 것이다.

• Computers and Concrete
• /
• 제33권2호
• /
• pp.217-240
• /
• 2024

The purpose of this study is to propose new hysteretic characteristics of medium- to low-rise RC structures controlled by both shear and flexure. Through previous study, the dual lateral force-resisting system composed of shear and flexural failure members has a new failure mechanism that cooperates to enhance the flexural capacity of the flexural failure member even after the failure of the shear member, and the existing theoretical equation significantly underestimates the ultimate strength. In this study, the residual lateral strength mechanism of the dual lateral force-resisting system was analyzed, and, as a result, an equation for estimating the residual flexural strength of each shear-failure member was proposed. The residual flexural strength of each shear-failure member was verified in comparison with the structural testing results obtained in previous study, and the proposed residual flexural strength equation for shear-failure members was tested for reliability using FEA, and its applicable range was also determined. In addition, restoring-force characteristics for evaluating the seismic performance of the dual lateral force-resisting system (nonlinear dynamic analysis), reflecting the proposed residual flexural strength equation, were proposed. Finally, the validity of the restoring-force characteristics of RC buildings equipped with the dual lateral force-resisting system proposed in the present study was verified by performing pseudo-dynamic testing and nonlinear dynamic analysis based on the proposed restoring-force characteristics. Based on this comparative analysis, the applicability of the proposed restoring-force characteristics was verified.

• 콘크리트학회논문집
• /
• 제13권5호
• /
• pp.466-475
• /
• 2001

휨항복 후 전단 파괴하는 철근콘크리트 보의 전단 성능 저하가 예측되었다. 휨항복 후 철근콘크리트 보에는 소성 힌지 구간이 형성되며 축방향 변형률이 급격히 증가한다. 축방향 변형률이 급격히 증가함에 따라 콘크리트 유효 압축 강도가 감소하며 철근콘크리트 보의 잠재 전단 강도는 감소한다. 제안된 전단 성능 저하 예측법은 이와 같은 휨항복 후 전단 파괴하는 철근콘크리트 보의 전단 파괴 특성을 고려한 트러스 모델에 기본을 두고 있다. 해석에서는 철근콘크리트 보의 실제 부재 축방향 변형률 $\varepsilon$x 값을 RA-STM에 대입하여 고정한 후에 그 부재의 잠재 전단 강도를 구하였다. 주어진 $\varepsilon$x값의 증가에 의하여 보의 잠재 전단 강도가 휨항복 시의 전단력에 도달할 때의 부재 변형 능력을 그 부재의 최대 연성 능력으로 하였다. 예측된 부재 변형 능력은 보통강도 콘크리트를 사용한 시험체의 부재 변형 능력을 최대 35% 과소 평가하였지만, 그 차이는 전단보강근의 양이 증가함에 따라서 감소하였다. 고강도 콘크리트를 사용한 시험체에 대하여 예측된 부재 변형 능력은 실제 부재 변형 능력을 최대 20% 과대 평가하였다. 철근콘크리트 보의 전단 변형 능력의 예측은 콘크리트의 유효 압축 강도νf ck와 밀접한 관계가 있어 보의 전단 변형 능력을 보다 정확히 예측하기 위해서는 사인장 균열과 직각 되는 방향의 변형률 $\varepsilon$$_1$가 큰 경우의 νf ck 에 대한 연구가 필요하다고 사료된다.

• Structural Engineering and Mechanics
• /
• 제67권4호
• /
• pp.347-358
• /
• 2018

The main aim of this research was to investigate the shear strength of non-prismatic steel fiber reinforced concrete beams under monotonic loading considering different parameters. Experimental program included tests on fifteen non-prismatic reinforced concrete beams divided into three groups. For the first and the second groups, different parameters were taken into consideration which are: steel fibers content, shear span to minimum depth ratio ($a/d_{min}$) and tapering angle (${\alpha}$). The third group was designed mainly to optimize the geometry of the non-prismatic concrete beams with the same concrete volume while the steel fiber ratio and the shear span were left constant in this group. The presence of steel fibers in concrete led to an increase in the load-carrying capacity in a range of 10.25%-103%. Also, the energy absorption capacity was increased due to the addition of steel fibers in a range of 18.17%-993.18% and the failure mode was changed from brittle to ductile. Tapering angle had a clear effect on the shear strength of test specimens. The increase in tapering angle from ($7^{\circ}$) to ($12^{\circ}$) caused an increase in the ultimate shear capacity for the test specimens. The maximum increase in ultimate load was 45.49%. The addition of steel fibers had a significant impact on the post-cracking behavior of the test specimens. Empirical equation for shear strength prediction at cracking limit state was proposed. The predicted cracking shear strength was in good agreement with the experimental findings.

• Structural Engineering and Mechanics
• /
• 제16권4호
• /
• pp.493-517
• /
• 2003

Attempts at improving beam-column joint performance has resulted in non-conventional ways of reinforcement such as the use of the crossed inclined bars in the joint area. Despite the wide accumulation of test data, the influence of the crossed inclined bars on the shear strength of the cyclically loaded exterior beam-column joints has not yet been quantified and incorporated into code recommendations. In this study, the investigation of joints has been pursued on two different fronts. In the first approach, the parameters that influence the behaviour of the cyclically loaded beam-column joints are investigated. Several parametric studies are carried out to explore the shear resisting mechanisms of cyclically loaded beam-column joints using an experimental database consisting of a large number of joint tests. In the second approach, the mechanical behaviour of joints is investigated and the equations for the principal tensile strain and the average shear stress are derived from joint mechanics. It is apparent that the predictions of these two approaches agree well with each other. A design equation that predicts the shear strength of the cyclically loaded exterior beam-column joints is proposed. The design equation proposed has three major differences from the previously suggested design equations. First, the influence of the bond conditions on the joint shear strength is considered. Second, the equation takes the influence of the shear transfer mechanisms of the crossed inclined bars into account and, third, the equation is applicable on joints with high concrete cylinder strength. The proposed equation is compared with the predictions of the other design equations. It is apparent that the proposed design equation predicts the joint shear strength accurately and is an improvement on the existing code recommendations.