• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.30-33
• /
• 2004

Sharp has developed industry's largest high-definition LC TV, Aquos LC-45GDI. In this paper, we discuss its 10-bit signal processing as one important enabler of its excellent picture quality. Utilizing 10 bits signal processing, in combination with full-spec High-Definition panel and "Intelligent Environment Illumination Sensor", we have succeeded to realize a beautiful gigantic LC TV.

• Journal of Soil and Groundwater Environment
• /
• v.8 no.1
• /
• pp.68-74
• /
• 2003

SHARP numerical model was used to estimate the interface, ranges and seasonal variations of seawater intrusion. The interface obtained from the SHARP model represented more sensitive to seasonal variations than that estimated from the monitoring wells. When TDS and groundwater velocity vector distributions generated by SUTRA simulations are compared to the interfaces obtained from SHARP simulation, the difference of the range on seawater intrusion is less than 50 m, and the range of seawater intrusion from seasonal variations has the difference of about 12 m. These differences are small for the numerical simulation of the coastal aquifer at regional scale. Therefore, the model with sharp interface is very useful to estimate the interface at this study site, where is regional aquifer system in the scale of seawater infusion. However the SHARP model have some limitations in simulating the range of seawater intrusion, when the hydrodynamic dispersion is significant for seawater intrusion at local aquifer system.

• Korean Journal of Environmental Biology
• /
• v.18 no.1
• /
• pp.121-124
• /
• 2000

A taxonomic review of the subtribe Astenina in Korea is presented. Five species and two genera are recognized, four species of which are recorded for the first time in Korea [Nazeris opatatus (Sharp), Astenus brevipes (Sharp), A. porosus (Sharp), and A. suffusus (Sharp)]. The genus Nazeris Fauvel is new to Korea. The key and diagnosis of each species are presented. [Taxonomy, Insects, Coleoptera, Staphylinidae, Paederinae, Astenina, Korea].

• Korean Journal of Mathematics
• /
• v.24 no.3
• /
• pp.537-543
• /
• 2016

Let D be an integral domain, X be an indeterminate over D, D[X] be the polynomial ring over D, and D(X) be the Nagata ring of D. Let [d] be the star operation on D[X], which is an extension of the d-operation on D as in [5, Theorem 2.3]. In this paper, we show that D is a sharp domain if and only if D[X] is a [d]-sharp domain, if and only if D(X) is a sharp domain.

• Journal of the Korean Society of Safety
• /
• v.32 no.4
• /
• pp.28-33
• /
• 2017

A sharp curved ballasted track on earthwork that was connected with a direct fixation slab track on steel box railway bridges have been deformed and damaged despite the frequently maintenance by a restoring force of sharp curved rail and track-bridge interaction forces such as axial forces and longitudinal displacement of continuous welded rail(CWR) owing to their structural characteristics, calling for alternatives to improve the structural safety and track irregularity. In this study, the authors aim to prove a cause of deformation for the sharp curved ballasted tracks to enhance the structural safety and track irregularity of ballasted track in service. A track-bridge interaction analysis and a finite-element method analysis for the sharp curved ballasted track were performed to consider the axial force and longitudinal displacement of CWR, the temperature and the effect of restoring force of sharp curved rail. From the results, the deformation of the sharp curved ballasted track with adjusted sleeper spacing from 833mm to 590mm were significantly reduced.

• Journal of Korea Game Society
• /
• v.2 no.1
• /
• pp.62-68
• /
• 2002

This paper presents a method for tessellating trimmed NURBS surface with preserving sharp shape Although several existing approaches need a large number of triangular meshes to represent sharp shape of surface, resulting triangular meshes may not reflect sharp edges properly. In this study, we flit detect the sharp shape of NURBS surface automatically using C1 continuous condition and then use constraint Delaunay triangulation method to present exact sharp shape with the minimum triangular meshes. And we also use approximated developed surface domain as triangulation domain of rimmed NURBS surface. In this way, the shape of triangular elements on the triangular domains is approximately preserved and can avoid distortion when mapped into three-dimensional space. finally, we show examples that demonstrate the effectiveness of the proposed scheme in terms of reducing the number of triangular meshes and preserving sharp shape of surface more exactly.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.16 no.1
• /
• pp.12-16
• /
• 2012

Purpose : In conventional PET image reconstruction, iterative reconstruction methods such as OSEM (Ordered Subsets Expectation Maximization) have now generally replaced traditional analytic methods such as filtered back-projection. This includes improvements in components of the system model geometry, fully 3D scatter and low noise randoms estimates. SharpIR algorithm is to improve PET image contrast to noise by incorporating information about the PET detector response into the 3D iterative reconstruction algorithm. The aim of this study is evaluation of SharpIR reconstruction method in PET/CT. Materials and Methods: For the measurement of detector response for the spatial resolution, a capillary tube was filled with FDG and scanned at varying distances from the iso-center (5, 10, 15, 20 cm). To measure image quality for contrast recovery, the NEMA IEC body phantom (Data Spectrum Corporation, Hillsborough, NC) with diameters of 1, 13, 17 and 22 for simulating hot and 28 and 37 mm for simulating cold lesions. A solution of 5.4 kBq/mL of $^{18}F$-FDG in water was used as a radioactive background obtaining a lesion of background ratio of 4.0. Images were reconstructed with VUE point HD and VUE point HD using SharpIR reconstruction algorithm. For the clinical evaluation, a whole body FDG scan acquired and to demonstrate contrast recovery, ROIs were drawn on a metabolic hot spot and also on a uniform region of the liver. Images were reconstructed with function of varying iteration number (1~10). Results: The result of increases axial distance from iso-center, full width at half maximum (FWHM) is also increasing in VUE point HD reconstruction image. Even showed an increasing distances constant FWHM. VUE point HD with SharpIR than VUE point HD showed improves contrast recovery in phantom and clinical study. Conclusion: By incorporating more information about the detector system response, the SharpIR algorithm improves the accuracy of underlying model used in VUE point HD. SharpIR algorithm improve spatial resolution for a line source in air, and improves contrast recovery at equivalent noise levels in phantoms and clinical studies. Therefore, SharpIR algorithm can be applied as through a longitudinal study will be useful in clinical.

• Journal of Computational Design and Engineering
• /
• v.1 no.2
• /
• pp.88-95
• /
• 2014

Because the cost of performance testing using actual products is expensive, manufacturers use lower-cost computer-aided design simulations for this function. In this paper, we propose using hexahedral meshes, which are more accurate than tetrahedral meshes, for finite element analysis. We propose automatic hexahedral mesh generation with sharp features to precisely represent the corresponding features of a target shape. Our hexahedral mesh is generated using a voxel-based algorithm. In our previous works, we fit the surface of the voxels to the target surface using Laplacian energy minimization. We used normal vectors in the fitting to preserve sharp features. However, this method could not represent concave sharp features precisely. In this proposal, we improve our previous Laplacian energy minimization by adding a term that depends on multi-normal vectors instead of using normal vectors. Furthermore, we accentuate a convex/concave surface subset to represent concave sharp features.

• Journal of the Korean Mathematical Society
• /
• v.54 no.2
• /
• pp.399-415
• /
• 2017

Given a topological space X and a non-negative integer k, we study the self-homotopy equivalences of X that do not change maps from X to n-sphere $S^n$ homotopically by the composition for all $n{\geq}k$. We denote by ${\varepsilon}^{\sharp}_k(X)$ the set of all homotopy classes of such self-homotopy equivalences. This set is a dual concept of ${\varepsilon}^{\sharp}_k(X)$, which has been studied by several authors. We prove that if X is a finite CW complex, there are at most a finite number of distinguishing homotopy classes ${\varepsilon}^{\sharp}_k(X)$, whereas ${\varepsilon}^{\sharp}_k(X)$ may not be finite. Moreover, we obtain concrete computations of ${\varepsilon}^{\sharp}_k(X)$ to show that the cardinal of ${\varepsilon}^{\sharp}_k(X)$ is finite when X is either a Moore space or co-Moore space by using the self-closeness numbers.

• Communications of the Korean Mathematical Society
• /
• v.31 no.2
• /
• pp.237-246
• /
• 2016

The purpose of this paper is to introduce some new class of rings that are closely related to the classes of sharp domains, pseudo-Dededkind domains, TV domains and finite character domains. A ring R is called a ${\phi}$-sharp ring if whenever for nonnil ideals I, A, B of R with $I{\supseteq}AB$, then I = A'B' for nonnil ideals A', B' of R where $A^{\prime}{\supseteq}A$ and $B^{\prime}{\supseteq}B$. We proof that a ${\phi}$-Dedekind ring is a ${\phi}$-sharp ring and we get some properties that by them a ${\phi}$-sharp ring is a ${\phi}$-Dedekind ring.