• Title/Summary/Keyword: SHAPE

Search Result 32,860, Processing Time 0.06 seconds

Study on the Usefulness of Using Anterior and Posterior Views for Calculation of Total Relative Uptake Ratio in 99mTc-DMSA Renal Scan (99mTc-DMSA 검사에서 상대 신섭취율 산출 시 양면상 촬영의 유용성에 대한 고찰)

  • Kim, Joo-Yeon;Lee, Han-Wool;Kwon, O-Jun;Kim, Jung-Yul;Park, Min-Soo;Cho, Seok-Won;Kang, Chun-Goo;Kim, Jae-Sam
    • The Korean Journal of Nuclear Medicine Technology
    • /
    • v.19 no.1
    • /
    • pp.37-43
    • /
    • 2015
  • Purpose $^{99m}Tc-DMSA$ renal scintigraphy serves as location, size and shape of kidney, so it has been used for diagnosis and passage observation after the operation or treatment. There are 3 methods of calculating the relative renal uptake ratio such as geometric mean of the counts from the anterior and posterior views, arithmetical mean from the only posterior view and posterior view which applied the renal depths. In this study, we seek to correlation between the change of total relative uptake ratio according to different inspection methods of obtaining the renal count rate. Materials and Methods The phantom experiments proceeded 5 times depending on each renal depth with the kidney phantom and tissue equivalent materials. In the clinical research, we investigated 36 adult patients who had visited our hospital from february to october, 2014 and received $^{99m}Tc-DMSA$ renal scan. The equipment was used as a gamma camera named INFINIA (General Electric Healthcare, milwaukee, USA) and we drew the region of interests through semiautomatic method by using Xeleris Ver. 2.1220 of GE. In addition, we obtained the lateral view of kidney to measure the renal depth of each patient. Then the results were compared with 3 methods of calculating relative renal uptake ratio. Results The phantom studies show when the difference between the left ant right kidney depth were less than 1 cm, there were no statistically significant difference among values calculated through anterior and posterior views and only posterior view (P>0.05), while the excess of 1cm, the results showed a statistically significant change in the value (P<0.05). In case of clinical research, the correlation between total relative uptake ratio by obtaining both sides of image and posterior view applied the kidney depth (r=0.999) was higher than by obtaining only posterior view and applying the kidney depth to one side image (r=0.988). Conclusion This study has found that, the difference of calculating total relative uptake ratio compared with obtaining anterior and posterior views and only posterior view. In order to reduce the error, we recommend the method of obtaining anterior and posterior views and is considered to be useful, particularly the patients have similar uptake ratio of left and right kidney and difficulties of measurements of kidney depth.

  • PDF

Characteristics and Formation conditions of the Rhodoliths in Wu Island beach, Jeju-do, Korea: Preliminary Report (제주도 우도의 홍조단괴 해빈 퇴적물의 특징과 형성조건 : 예비연구 결과)

  • 김진경;우경식;강순석
    • The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
    • /
    • v.8 no.4
    • /
    • pp.401-410
    • /
    • 2003
  • Three beaches of the Seogwang-ri coast in the western part of Wu Island, Jeju-do, are solely composed of rhodoliths (red algal nodules). The beach sediments are coarse sand to granule in size and they show the banded distribution according to size. Commonly the larger pebble-sized rhodoliths are concentrated near the rocky coast, resulting from the transportation of the nodules from shallow marine environments by intermittent typhoons. Based on the internal texture of the rhodoliths, it appears that crustose red algae, Lithophyllum sp., is the main contributor for the formation of the rhodolith. The coarse sand to granule-sized grains show that they started to grow from the nucleus as rhodoliths, but the surface was severely eroded by waves. However, the pebble to cobble-sized grains exhibit the complete growth pattern of rhodoliths and sometimes contain other calcareous skeletons. It is common that encrusting red algae are intergrown with encrusting bryozoan. The surface morphology of rhodolith tends to change from the concentric to domal shape towards the outer part. This suggests that the rhodolith grew to a certain stage by rolling, but it grew in more quiet condition without rolling as it became larger. Aragonite and calcite cements can be found in the pores within rhodoliths (conceptacle, intraskeletal pore in bryozoan, and boring), and this means that shallow marine cementation has occurred during their growth. Growth of numerous rhodoliths in shallow marine environment near the Seogwang-ri coast indicates that this area has suitable oceanographic conditions for their growth such as warm water temperature (about 19$^{\circ}C$ in average) and clear water condition due to the lack of terrestrial input of volcanoclastic sediments. Fast tidal current and high wave energy in the shallow water setting can provide suitable conditions enough for their rolling and growth. Typhoons passing this area every summer also influence on the growth of rhodoliths.

Development of Agrobacterium-mediated Transformation Method for Domestically Bred Chrysanthemum Cultivar 'Moulinrouge' and Genetic Change of Leaf Morphology Using AtSICKLE Gene (아그로박테리움를 이용한 국내개발 국화품종 '무랑루즈'의 형질전환 기술 및 AtSICKLE 유전자를 이용한 엽형 변화 국화 형질전환체 개발)

  • Kim, Yun-Hye;Park, Hyun-Myung;Jung, Ji-Yong;Kwon, Tack-Min;Jeung, Soon-Jae;Yi, Young-Byung;Kim, Gyung-Tae;Nam, Jae-Sung
    • Horticultural Science & Technology
    • /
    • v.28 no.3
    • /
    • pp.449-455
    • /
    • 2010
  • 'Moulinrouge' was selected as the best regenerating cultivar among 18 different spray-type chrysanthemum cultivars bred in the Gyeongnam Flowers Breeding Research Institute. When the leaf explants from standard- and spray-type chrysanthemum 'Jinba' and 'Moulinrouge' were incubated on MS basal medium supplemented with $0.5mg{\cdot}L^{-1}$ BA and $1.0mg{\cdot}L^{-1}$ NAA, both 'Jinba' and 'Moulinrouge' induced adventitious shoots that can be regenerated into plantlets. Based on these regeneration conditions, we developed an efficient $Agrobacterium$-mediated chrysanthemum 'Moulinrouge' transformation method by using sequential selection of shoots from low ($10mg{\cdot}L^{-1}$) to high ($30mg{\cdot}L^{-1}$) concentrations of kanamycin after co-cultivation of leaf explants with $Agrobacterium$ for 10 days and induction of shoots. All kanamycin resistant plants investigated with genomic PCR analysis carried the report gene, $AtSICKLE$, in their genome. Although expression levels of the report gene in the transgenic plants investigated with RT-PCR were relatively low because of inefficiency of CaMV 35S promoter in chrysanthemum, transgenic lines expressing $AtSICKLE$ efficiently showed leaf epinasty phenotype. We expect that our results will provide a useful method that can perform a high-throughput investigation of genes isolated and studied well in model plants for molecular breeding of chrysanthemum.

Chinese Consumer Preference of Chicken Burgers Cooked by Sous-vide with Korean-styled Seasoning and Available on the Chinese Fast Food Market (진공저온조리를 이용한 한식 스타일 치킨버거와 중국 시판 치킨버거의 중국 소비자 기호도)

  • Bae, Sungeun;Jang, Jin A;Oh, Jieun;Lee, Kyungwon;Cho, Mi Sook
    • Korean Journal of Food Science and Technology
    • /
    • v.45 no.1
    • /
    • pp.126-132
    • /
    • 2013
  • The purpose of this study is to examine the difference of Chinese consumer preference between chicken burgers cooked by Sous-vide adding Korean-styled seasoning and chicken burgers from local fast food restaurants. For Chinese women in their 20s who reside in Beijing, China, the most important attribute for eating-out was taste (M=6.5), health (M=6.0) and pleasure (M=5.6) in order and 68.60% of them replied that they were interested in Korean cuisine. More than 90% answered they like Korean food for its good taste, shape and color. As for burger preference, BB was significantly higher in terms of the overall and appearance preference. However, there was no significant difference between AB and SB. As for flavor and texture, it showed no significant differences among BB, AB, and SB products. For SB, total balance, soft texture of patty and balance of flavor characteristics were the reasons for their preference of the burger.

Breeding of Middle Season Pear Cultivar 'Shinil' with Attractive Appearance for Chuseok Season (외관(外觀)이 수려한 추석(秋夕) 출하용 중생종 배 '신일(新一)' 육성(育成))

  • Kim, Whee-Cheon;Hwang, Hae-Sung;Shin, Yong-Uk;Shin, Il-Sheob;Lee, Don-Kyun;Kang, Sang-Jo;Cheon, Byung-Deok;Moon, Jong-Youl;Kim, Jung-Ho
    • Horticultural Science & Technology
    • /
    • v.19 no.1
    • /
    • pp.60-65
    • /
    • 2001
  • 'Shinil' pear cultivar (Pyrus pyrifolia Nakai) which was originated in a cross between 'Shinko' (non-patented, released in 1941) and 'Hosui' (non-patented, released in 1972) in 1978 was released as a middle season harvest variety. Its usual picking time coincided with 'Chuseok' season which is one of the most famous national holiday in Korea. The fruit showed high soluble solids content and good appearance. The cultivar was preliminarily selected in 1991, and its regional adaptability was evaluated in the name of 'Wonkyo Na-13' at 9 sites for four years from 1992, and finally selected and named in 1995. 'Shinil' is medium in tree vigor like 'Hosui' and spreading in tree habit as 'Niitaka', a leading cultivar in Korea, and consistently very productive. It has high resistance to black rot caused by Alternaria kikuchiana and pear necrotic spot caused by pear necrotic spot virus. Its full bloom is one day earlier than that of 'Niitaka' cultivar and harvest time is September 25 at Suwon area which is 3 days later than that of 'Hosui'. Fruit is round in shape with a deep medium stalk cavity and medium calyx basin and has attractive light yellow brown skin color. The fruit weight ranges between 300 and 400 g, which is similar to 'Chojuro', 'Shinko', and 'Hosui'. Soluble solid content is approximately at the level of 13-14 Brix, which is higher than that of 'Chojuro'. The flesh is cream-white, very juicy, and light grit with soft and fine texture.

  • PDF

The Bibliographical Study on Development of Yackwa (약과(藥果) 문화(文化)의 변천에 관(關)한 문헌적(文獻的) 고찰(考察))

  • Cho, Shin-Ho;Lee, Hyo-Gee
    • Journal of the Korean Society of Food Culture
    • /
    • v.2 no.1
    • /
    • pp.33-43
    • /
    • 1987
  • The cooking processes of Yackwa writen in 27 Korean books were reviewed. The changes of the names, shapes, materials and methods of dough, and the methods of frying, the materials and methods of soaking, garnishes were reviewed based on the historical literatures. 1. The changes of names of Yackwa were Yackwa, Kwajul, Chokwa and the shapes were bird, animal, round or cubic. The diameter was about 3.5cm, and thickness was from 0.5cm to 1.5cm. 2. The major ingredients of Yackwa were flour, honey, sesame oil and alcohol beverages. Sometimes, soybean powder and rice powder were used instead of flour, and chochung, sugar water, sugar syrup were used instead of honey. Sesame oil was usually used but salad oil were used occasionally. Usually pure liquor, distilled spirits, rice wine, cloudy and coarse rice wine, whisky were used as alcoholic ingredient and water was used at boiling state. Sesame and sesame salt, ginger and ginger juice, pepper powder, pine nuts powder, salt were used as minor ingredients. 3. Though the flour was kneaded extensively or gently, the latter was peculier since 1940. 4. The dough was fried in oil at $120{\sim}160^{\circ}C$ for $5{\sim}15$ minutes. at that time, The shape will be broken if temperature of oil is too low and too harden if temperature is too high. 5. Fried dough was soaked in honey before 1940, but thereafter other sweeteners, such as chochung, syrup were also used. Ginger juice, dried ginger, citron juice were used for flavor. 6. For enhancing the flavor and softening excess oil was removed from the fried Yackwa, and then it was soaked in honey. 7. The garnishes of Yackwa were pine nuts powder, cinnamon powder, sugar, etc.

  • PDF

A Study on the Application of Bushings Fire Prevent Structure to Prevent Fire Spread of Transformer (변압기의 화재확산 방지를 위한 부싱 방화구조체 적용에 관한 연구)

  • Kim, Do-Hyun;Cho, Nam-Wook;Yoon, Choung-Ho;Park, Pil-Yong;Park, Keun-Sung
    • Fire Science and Engineering
    • /
    • v.31 no.5
    • /
    • pp.53-62
    • /
    • 2017
  • Electric power which is the energy source of economy and industries requires long distance transportation due to regional difference between its production and consumption, and it is supplied through the multi-loop transmission and distribution system. Prior to its actual use, electric power flows through several transformations by voltage transformers in substations depending on the characteristics of each usage, and a transformer has the structure consisting of the main body, winding wire, insulating oil and bushings. A transformer fire that breaks out in substations entails the primary damage that interrupts the power supply to houses and commercial facilities and causes various safety accidents as well as the secondary economic losses. It is considered that causes of such fire include the leak of insulating oil resulting from the destruction of bottom part of bushings, and the chain reaction of fire due to insulating oil that reaches its ignition point within 1 second. The smoke detector and automatic fire extinguishing system are established in order to minimize fire damage, but a difficulty in securing golden time for extinguishing fire due to delay in the operation of detector and release of gas from the extinguishing system has become a problem. Accordingly, this study was carried out according to needs of active mechanism to prevent the spread of fire and block the leak of insulating oil, in accordance with the importance of securing golden time in extinguishing a fire in its early stage. A bushings fireproof structure was developed by applying the high temperature shape retention materials, which are expanded by flame, and mechanical flame cutoff devices. The bushings fireproof structure was installed on the transformer model produced by applying the actual standards of bushings and flange, and the full scale fire test was carried out. It was confirmed that the bushings fireproof structure operated at accurate position and height within 3 seconds from the flame initiation. It is considered that it could block the spread of flame effectively in the event of actual transformer fire.

Chemical Modification of Silk by Ethylene Cyanohydrin (에틸렌 시아노히드린에 의한 실크의 화학적 개질)

  • Lee, Geun-Souk;Bae, Do-Gyu
    • Current Research on Agriculture and Life Sciences
    • /
    • v.26
    • /
    • pp.23-30
    • /
    • 2008
  • In this paper, when the silk fabric was modified by ethylene cyanohydrine, the reaction mechanism between both was studied at various treatment conditions such as curing temperatures and times, ethylene cyanohydrin concentrations and $ZnCl_2$ concentrations. Through the FT-IR and DSC analyses of the treated silk fabrics, we found the results as follows : It was observed in FT-IR analysis of the treated silk fabrics that the -OH characteristic peak($3,450cm^{-1}$)position and shape were all changed when drying and curing treatment conditions were at $80^{\circ}C$ for 3 minute and $110^{\circ}C$ for 2.5 minute, and the concentration of the $ZnCl_2$ was 0.1%. It indicated that the -OH group of the silk participated in the reaction between the silk fabric and ethylene cyanohydrin. From the DSC analysis, it was found that the pyrolysis temperatures of the treated silk fabrics by ethylene cyanohydrin which was processed in the same condition, were all increased from $311^{\circ}C$ to ab. $320^{\circ}C$. From the FT-IR analyses of the silk fabrics treated by ethylene cyanohydrin at the various concentrations of $ZnCl_2$, it was found that the -OH characteristic peaks($3,450cm^{-1}$) were similar to the nontreated one except that of the fabric treated at the $ZnCl_2$ conconcentration of 0.8% when drying and curing treatment conditions were at $80^{\circ}C$ for 3minute and $110^{\circ}C$ for 2.5 minute, and the concentration of the ethylene cyanohydrin was 5%. In the case of the $ZnCl_2$ concentration of 0.8% solution, a lot of change were observed in peak. From the DSC analysis of the treated silk fabrics which was processed in the same condition, it was showed that the pyrolysis temperatures of treated silk fabric were all increased from $311^{\circ}C$ to ab. $320^{\circ}C$, which was no relation with the concentration of $ZnCl_2$.

  • PDF

Cognition and Satisfaction of Customer in Home-delivered Meal (가정배달급식에 대한 고객의 인식 및 만족도 조사)

  • 김혜영;류시현
    • Korean journal of food and cookery science
    • /
    • v.19 no.4
    • /
    • pp.529-538
    • /
    • 2003
  • The objectives of this study were to measure customers' cognition and overall satisfaction, and to identify relatively important attributes for the overall satisfaction, of home-delivered meals. Questionnaires were distributed to 243 customers. The statistical data analyses were completed by x$^2$-tests, ANOV A, factor analysis, reliability analysis and regression analysis using SPSS version 10. 56.6% of customers get obtained information from the internet, with 31.3% of these using this method at least once a week, but 72.9% of customers used this method less than once per years. The major reasons for ordering home-delivered meals were tired of cooking, more economical and no time to cook. The results were significantly different in relation to age, occupation and monthly income. The major reasons for hesitation about ordering home-delivered meals were meals should be prepared in households, not sanitary and the use of too many artificial flavors. The results for this factor were significantly different in relation to gender, age and monthly income(p<0.01). The most preferred kinds of home-delivery meals were Korean soup (guk), stew, soup (tang), speciality dishes and party dishes. The customer's cognition of kindness of the delivery staff was highest, with food temperature being the lowest among the options. The food and service level factors were derived from a factor based analysis of customer's cognition towards home-delivered meals. The customer's cognition of food taste, food quantity, kindness of delivery staff and packaging container shape were significantly different according to the use frequency and use period. The packaging method, sanitation, kindness of delivery staff, price and taste were the most relatively important attributes for overall satisfaction with home-delivered meals.

A Study The Structural Stability of the Fence Ohgokmun Soswaewon Factor Analysis (소쇄원 오곡문 담장의 구조적 안정에 미치는 요인 분석)

  • Jang, Ik-Sik;Jeon, Hyeong-Soon;Ha, Tae Ju;Lee, Jae-Keun
    • Journal of the Korean Institute of Traditional Landscape Architecture
    • /
    • v.31 no.4
    • /
    • pp.113-122
    • /
    • 2013
  • In this study, the traditional structure of the impact on the stability analysis. Korean traditional landscape architecture column space of stonework stable composition as the foundation of the fence for a long time been known to fall down and not maintained. The destination of research Ohgokmun Damyang Soswaewon fence which is in harmony with nature is one of the traditional structures that affect its shape without being kept so far came true. This includes our ancestral wisdom and that wisdom can guess guesswork. But I let the traditional reproduction incidence structures frequently. This deviation from the traditional method of construction application of shorthand stand. Thus, the subject of this study, the factors that do not fall down fences Ohgokmun solution is to indirectly gain the weak. In addition, epidemiological studies and the methods of calculation of the inferred physical examination, the results of the analysis were derived through the following. First, the internal factors of the fence Ohgokmun constituting the structural member and the coupling of the scheme. 1) based on stable ground. Greater role in the country rock The fact that the settlement will have no symptoms. 2) to minimize the friction caused by hydrological water to remove the two-pronged process through stone work building form and menu sustaining power in hydrology and flooding made against the bypass channel. 3) due to the load bearing capacity and durability to withstand the strength of the material and the construction of structures in the form of a dispersion of power between each individual to maximize the process of getting traction was applied. Second, external factors Ohgokmun fence the results obtained through the calculation of the dynamics of repair, is greatly affected by the wind and the water gate of the fence, but the action of the structural stability of the lack of power that hurt enough conclusion. In this study, the results of the structure of internal and external influence as well through the structure can be viewed as composed consisting. However, over the next follow-up in terms of climate and environmental factors due to the fact that the fall might.