• 대한기계학회논문집A
• /
• 제35권4호
• /
• pp.417-424
• /
• 2011

핵연료집합체는 상단고정체, 하단고정체, 지지격자체, 제어관/계측관과 핵연료봉의 5 가지 주요 구성품으로 이루어져 있다. 여기서 상/하단고정체는 다른 구성품과 달리 ASME, Section III, Division 1 - Subsection NB 의 운전조건 A, B 에서의 stress intensity limits 를 만족하여야 한다. 이중냉각 핵연료집합체는 집합체당 출력을 증가시키기 위해서 기존의 가압경수로용 핵연료집합체에서 핵연료봉의 배열과 위치를 변화시켰는데 이로 인하여 핵연료봉 내/외부유로로 냉각수가 잘 흐를 수 있도록 상/하단고정체의 유로판의 형상을 수정하여야 한다. 본 논문에서는 설계하중조건에 대하여 수정된 상단고정체 유로판의 건전성평가를 위해 수행한 응력선형화과정을 자세히 설명하고 평가결과에 대하여 기술하였다.

• 복식
• /
• 제54권4호
• /
• pp.63-74
• /
• 2004

This study shows that clothes to be just the same as the real thing can be Produced through the third dimension computer graphics, and then presents that not only the area of fashion design can be expanded in the virtual reality field by doing the simulation of the fashion show, but also the information can be made the real time public ownership and the communication can be fulfilled smoothly. In this study, analyzing the third dimension computer graphic programs to be used much at present, Alias Wavefront Company's Maya software which was the most effective in the clothes simulation and the clothes CAD SGS OptiTex 8.7 which went well substitutive for it were used of them. The conclusions of this study that got through the work manufacture are as follows： The first, if the file manufacturing in the clothes CAD by using the computer was stored, the pattern used 3D simulation was available because it could be summoned in 3D software. The second, if the data of DXF form in Maya program was summoned, they could not be applied by Maya Cloth supported in Nurbs only because they were recognized as the DXF＿layer. So the curve along the outer lines of the pattern was drawn and Maya Cloth was applied to be possible to get the natural silhouette of clothes. The third, when the clothes were manufactured by 3D, if the draping character was applied according to the textile special quality, not only the control of textile's thickness, weight, quality feeling, and silhouette was available, but also the clothes were available to graft the special textile materials. The fourth, the natural motion of model was produced by capturing the actual model's walking action In order to produce the fashion show motion and also the dynamic fashion show was available by the angle of camera, the establishment of lighting, and etc. in the final rendering. The clothes manufactured by 3D are available to change the design by changing the materials, or by adding the details, or by utilizing the special materials on clothes. Therefore, the trial and error following at the clothes manufacture can be reduced. But the elevation of the rendering speed, the price down, the strengthening of personal security, and etc. are required.

• 무역상무연구
• /
• 제20권
• /
• pp.63-82
• /
• 2003

The time of examination of buyer in international sales contract is very significant, because the time is related with the period of claim in buyer's aspect. From the legal point of view, the time of delivery, the time of examination and the time of quality decision should be in accord. But the buyer, whose main place of business is located in importing country, wants to examine the goods in his own country. Therefore in CIF or FOB Contract, the place of delivery and the place of examination are divided. Thus the CISG, the Common Law System and the Civil Law System including Korean Law stipulate the buyer's examination at the destination if the sales contract involves carriage of the goods. This author, from the buyer's perspective, would like to make the following suggestions in regard to the time of examination when the sales contract is made. First, the time of examination and the time of quality decision should be in accord, even though the time of delivery is different. Second, the buyer should clearly indicate the time, the place, the inspector, the particulars and the burden of proof in regard to examination when contracting. Third, the buyer should also clearly indicate the period of notice for the lack of conformity in Claim Clause of sales contract, which should be counted from the time of examination. Fourth, the buyer should remember that he many lose the right to rely on the lack of conformity of the goods if he does not give the seller notice thereof within the stipulated time or reasonable time. Finally, if the buyer wants, to examine the goods at the place of shipment, it is desirable for the buyer to designate internationally recognized inspection organization like SGS.

• 한국산학기술학회논문지
• /
• 제16권5호
• /
• pp.3587-3595
• /
• 2015

본 연구에서는 저비용의 저심도 도시철도시스템을 구축하기 위하여 산업부산물인 고로슬래그 미분말, 플라이애시 및 급냉 전기로 산화슬래그를 사용하여 개발된 저탄소 친환경 PC 박스용 콘크리트의 역학적 성능 및 내구성을 평가 하였다. 역학적 특성을 평가한 결과, 재령 1일 압축강도는 모든 조건에서 설계기준강도($f_{ck}$) 35MPa의 90% 이상 강도 발현 하는 것으로 나타나 공기단축 가능으로 건설비용을 절감할 수 있을 것으로 판단된다. 또한, 소요의 물성 및 설계기준강도($f_{ck}$) 35MPa를 만족하는 범위에서 시멘트 단독 사용 조건보다 염소이온침투성 및 확산계수가 낮게 나타나 내염성능이 우수한 것으로 나타났으며, 동결융해 저항성 및 화학저항성의 경우에도 내구성능이 우수한 것으로 나타났다. 따라서 저탄소 친환경 PC 박스용 콘크리트를 사용할 경우, 시멘트 제조 시 발생되는 이산화탄소 및 환경부하를 저감할 수 있을 것으로 기대된다.

• 한국잠사학회:학술대회논문집
• /
• 한국잠사학회 1997년도 Progress and Future Development of Sericultural Science and Technology 40th Anniversary Commemoration Symposium
• /
• pp.51-72
• /
• 1997

Diapause hormone (DH) is a neuropeptide hormone which is secreted from the suboesophageal ganglion (SG) and is responsible for induction of embryonic diapause of the silkworm, Bombyx mori. DH is isolated from SGs and determined to be a 24 amino acid peptide amide. The cDNA encodes the polyprotein precursor from which DH, pheromone biosynthesis activating neuropeptide (PBAN) and three other neuropeptides are released and become matured. The C-terminal FXPRL-NH2 sequence of DH is essential but not sufficient for expression of full activity. Recently, we have isolated a unique hydrohobic peptide (VAP peptide) with a slight diapause egg induceing activity from organic solvent extracts of the male adult heads of the silkworm. The VAP peptide itself has no diapause inducing activity, but enhances DH activity through reducing ED50 value and the threshold concentration of DH. The DH-PBAN gene is composed of 6 exons interrupted by 5 introns and is expressed in 12 neurosecretory cells of the SG. The incubation of eggs at 25$^{\circ}C$, which induces embryonic diapause in the progeny, caused DH-PBAN mRNA content to increase at 5 different stages in the life cycle. By contrast, a 15$^{\circ}C$ incubation only induced expression of the gene at the late phrase adult stage. The temperature-controlled expression of DH-PBAN gene is closely correlated to the incidence of diapause, indicating that DH-PBAN gene expression is the initial event leading to diapause induction. DH acts to stimulate trehalase activity in developing ovary to bring about hyprglycogenism in mature eggs, a prerequisite metabolism for diapause initiation. Using in vivo and in vitro systems, DH is clearly shown to induce trehalase gene expression in developing ovaries. New protein synthesis is not needed for this process, but a Ca2+-dependent proteinkinase seems to be involved. Quite recently, we have sucessfully applied a new and potent trehalase inhibitor (Trehazoline) to reudce glycogen content in developing ovaries. The eggs deficient in glycogen were also able to enter diapause as the natural eggs do, so that we could provide the new egg system to reconsider the diapause associated metabolism other than the glycogen-sorbitol metabolic system.

• 대한조선학회논문집
• /
• 제56권4호
• /
• pp.308-315
• /
• 2019

In this study, numerical simulations of slamming impact pressure acting on the flat plate and wedge type models using the cartesian-grid system and Modified Marker-Density Method (MMD method) were performed and the results were examined. The flat plate and wedge type models were selected as target objects, the turbulence characteristics were considered by applying the Sub-Grid Scale (SGS) turbulence model. Through this study, how the pressure acting on the target objects according to the incident angle influences the slamming impact pressure was examined and the results were compared with the flow characteristics of other experimental results. Also, the degree of slamming impact pressure is evaluated with respect to the cartesian-grid system and MMD method, which is easy to use and has a high degree of calculation for free surface.

• 대한조선학회논문집
• /
• 제59권3호
• /
• pp.141-148
• /
• 2022

A hybrid turbulence model has developed by combining a sub-grid scale model using dynamic k equation in LES with k-𝜔 SST model of RANS equation. To ascertain potential applicability of the hybrid turbulence model, fully developed turbulent channel flows at Re_𝜏=180 have been simulated of which computational domain has a top wall with coarse cells and a bottom wall with fine cells. The streamwise mean velocity and turbulent intensity profiles showed a good agreement with DNS data when using the hybrid model rather than using a single model in k-𝜔 SST or dynamic k equation models. Computational simulations of turbulent flows around KVLCC2 with a pre-swirl duct have been mainly performed using the hybrid turbulence model. Compared to the results obtained from RANS simulation with k-𝜔 SST model as well as LES with dynamic k equation SGS model, turbulent wakes of the duct in the present simulation using the hybrid turbulence model were very similar to that of LES. Also, the resistances acting on hull, rudder and duct in hybrid turbulence model were similar to those in RANS simulation whereas the viscous forces acting on the hull in LES had a significant error due to coarse cells inappropriate to the sub-grid scale model.

• Wind and Structures
• /
• 제36권3호
• /
• pp.175-200
• /
• 2023

The large eddy simulation (LES) of the flow around a circular cylinder is not only affected by the sub-grid scale (SGS) model but also by the grid resolution of the computational domain. To study the influence of different grids on the LES results, the LES simulations of the flow around a circular cylinder with different grids at Reynolds number (Re) = 3900 was performed. A circular computational domain with different radial growth rates and circumferential and spanwise grid numbers was adopted for the simulations. Meanwhile, the aerodynamic forces, wind pressure coefficients, mean and instantaneous flow fields, and the effect of grid resolution on them were comprehensively analyzed. The results indicate that the lift coefficient, wind pressure coefficient, and recirculation length are significantly affected by the radial growth rate of the grid and the circumferential grid number. The spanwise grid number has a significant influence on the three-dimensionality of the flow and plays an important role in velocity fluctuations in the wake region. Nevertheless, the aerodynamic coefficients and recirculation length are not sufficiently sensitive to the grid number in the spanwise direction. By comparing the results, it can be concluded that suitable and reliable LES results can be obtained when the radial growth rate is 1.03 or 1.05, the circumferential grid number is 160, 200, or 240, and the spanwise grid number is 64. A radial growth rate 1.05, circumferential grid number 160, and spanwise grid number 64 are recommended to reduce the grid amount and further improve the efficiency.

• 비파괴검사학회지
• /
• 제35권1호
• /
• pp.61-67
• /
• 2015

최근 국내 증기발생기 Alloy 600HTMA 전열관의 관 지지판 부위 외면 축균열 결함의 생성이 지속적으로 증가하고 있다. 이로 인하여 증기발생기가 설계수명 이전에 조기 교체되었으며 또는 교체 예정이다. 전열관 외면 축균열은 건전성 관리에 가장 위협이 되는 요소이므로 정밀한 건전성 평가가 요구된다. 와전류검사(ECT, eddy currunt testing)는 주기적으로 수행되어 지며 이 결과는 건전성 평가 입력 자료로 활용된다. ECT 검사시스템의 신뢰성은 검사기술과 평가자 기량에 의존하며, NDE 시스템 성능을 보여주는 지수는 열화탐지와 크기 측정 오차이다. 본 연구에서는 국내 평가자 성능이 반영된 크기 측정 오차와 그리고 최적의 균열 크기 측정 방법을 제시하였다. 실험은 국내 각기 다른 5개 회사에서 10명의 평가자가 참여한 다자간 비교시험의 결과를 사용하여 이루어졌다. 실험 결과 분석은 파괴검사 결과값과 비파괴검사로 측정된 값의 상관관계를 회귀분석을 통하여 이루어졌다.

• 한국산학기술학회논문지
• /
• 제18권6호
• /
• pp.673-680
• /
• 2017

공원 산책로 및 관광지의 포장재로서 목재 칩-우레탄 수지 혼합물의 연구 및 상업화가 진행 중에 있다. 본 연구에서는 활발한 몸동작이 일어나는 놀이터에서 이러한 포장재의 이용을 확대하기 위한 방안을 강구하고자 하였다. 이를 위해, 목재 칩 (10mm 체를 통과하고 3mm 체에 남는 것)의 일부 또는 전부를 톱밥으로 대체한 목질 포장재의 물리적 성질 및 안전성을 실험에 의해 검토하였다. 우레탄 수지, 톱밥 및 목재 칩의 혼합비를 변화시켜 인장 강도, 휨강도, 탄성계수, 미끄럼 저항성, 충격 흡수성, 중금속 함량 및 용출 시험을 실시하였다. 그 결과, 톱밥과 목재 칩의 총 질량에 대한 수지의 질량비가 1.0 및 1.2이고, 톱밥과 목재 칩의 총 질량에 대한 톱밥의 질량비가 0~0.4인 시험체의 경우, KS F 3888-2의 표준을 대체로 만족함으로써 놀이터 등에서의 이용 가능성을 확인하였다. 그러나 목질 재료로 톱밥만을 사용한 경우에는 충격 흡수성이 기준치를 밑돌고, 규정된 인장 강도를 확보하기 위해서 톱밥과 수지의 질량비는 1.2 이상을 필요로 하는 것으로 나타났다.