• Journal of the Korean Society of School Health
• /
• v.12 no.2
• /
• pp.207-215
• /
• 1999

The objectives of this study are to explain the use of media materials in school health education with other related factors in elementary, middle, and high schools in Korea. The data were collected by questionnaires from June to September in 1998. The number of subjects were 294 school nurses. The PC-SAS program was used for statistical analysis such as percent distribution, chi-squared test, spearman correlation test, and logistic regression. The use of media materials in health education has become extremely common. Unfortunately, much of the early materials were of poor production quality, reflected low levels of interest, and generally did little to enhance health education programming. A recent trend in media materials is a move away from the fact filled production to a more affective, process-oriented approach. There is an obvious need for health educators to use high-quality, polished productions in order to counteract the same levels of quality used by commercial agencies that often promote "unhealthy" lifestyles. Health educators need to be aware of the advantages and disadvantages of the various forms of media. Selecting media materials should be based on more than cost, availability, and personal preference. Selection should be based on the goal of achieving behavioral objectives formulated before the review process begins. The decision to use no media materials rather than something of dubious quality usually be the right decision. Poor-quality, outdated, or boring materials will usually have a detrimental effect on the presentation. Media materials should be viewed as vehicles to enhance learning, not products that will stand in isolation. Process of materials is an essential part of the educational process. The major results were as follows : 1. The elementary schools used the materials more frequently. But the production rate of media materials was not enough. The budget was too small for a wide use of media materials in school health education. These findings suggest that all schools have to increase the budget of health education programs. 2. Computers offer an incredibly diverse set of possibilities for use in health education, ranging from complicated statistical analysis to elementary-school-level health education games. But the use rate of this material was not high. The development of related software is essential. Health educators would be well advised to develop a basic operating knowledge of media equipment. 3. In this study, the most effective materials were films in elementary school and videotapes in middle and high school. Film tends to be a more emotive medium than videotape. The difficulties of media selection involved the small amount of extant educational materials. Media selection is a multifaceted process and should be based on a combination of sound principles. 4. The review of material use following student levels showed that the more the contents were various, the more the use rate was high. 5. Health education videotapes and overhead projectors proved the most plentiful and widest media tools. The information depicted was more likely to be current. As a means to display both text and graphic information, this instructional medium has proven to be both effective and enduring. 6. An analysis of how effective the quality of school nurse and school use of media materials shows a result that is not complete (p=0.1113). But, the budget of health education is a significant variable. The increase of the budget therefore is essential to effective use of media materials. From these results it is recommended that various media materials be developed and be wide used.

• Asia pacific journal of information systems
• /
• v.19 no.2
• /
• pp.139-155
• /
• 2009

For the last few decades, many studies have tried to explore and unveil venture companies' success factors and unique features in order to identify the sources of such companies' competitive advantages over their rivals. Such venture companies have shown tendency to give high returns for investors generally making the best use of information technology. For this reason, many venture companies are keen on attracting avid investors' attention. Investors generally make their investment decisions by carefully examining the evaluation criteria of the alternatives. To them, credit rating information provided by international rating agencies, such as Standard and Poor's, Moody's and Fitch is crucial source as to such pivotal concerns as companies stability, growth, and risk status. But these types of information are generated only for the companies issuing corporate bonds, not venture companies. Therefore, this study proposes a method for evaluating venture businesses by presenting our recent empirical results using financial data of Korean venture companies listed on KOSDAQ in Korea exchange. In addition, this paper used multi-class SVM for the prediction of DEA-based efficiency rating for venture businesses, which was derived from our proposed method. Our approach sheds light on ways to locate efficient companies generating high level of profits. Above all, in determining effective ways to evaluate a venture firm's efficiency, it is important to understand the major contributing factors of such efficiency. Therefore, this paper is constructed on the basis of following two ideas to classify which companies are more efficient venture companies: i) making DEA based multi-class rating for sample companies and ii) developing multi-class SVM-based efficiency prediction model for classifying all companies. First, the Data Envelopment Analysis(DEA) is a non-parametric multiple input-output efficiency technique that measures the relative efficiency of decision making units(DMUs) using a linear programming based model. It is non-parametric because it requires no assumption on the shape or parameters of the underlying production function. DEA has been already widely applied for evaluating the relative efficiency of DMUs. Recently, a number of DEA based studies have evaluated the efficiency of various types of companies, such as internet companies and venture companies. It has been also applied to corporate credit ratings. In this study we utilized DEA for sorting venture companies by efficiency based ratings. The Support Vector Machine(SVM), on the other hand, is a popular technique for solving data classification problems. In this paper, we employed SVM to classify the efficiency ratings in IT venture companies according to the results of DEA. The SVM method was first developed by Vapnik (1995). As one of many machine learning techniques, SVM is based on a statistical theory. Thus far, the method has shown good performances especially in generalizing capacity in classification tasks, resulting in numerous applications in many areas of business, SVM is basically the algorithm that finds the maximum margin hyperplane, which is the maximum separation between classes. According to this method, support vectors are the closest to the maximum margin hyperplane. If it is impossible to classify, we can use the kernel function. In the case of nonlinear class boundaries, we can transform the inputs into a high-dimensional feature space, This is the original input space and is mapped into a high-dimensional dot-product space. Many studies applied SVM to the prediction of bankruptcy, the forecast a financial time series, and the problem of estimating credit rating, In this study we employed SVM for developing data mining-based efficiency prediction model. We used the Gaussian radial function as a kernel function of SVM. In multi-class SVM, we adopted one-against-one approach between binary classification method and two all-together methods, proposed by Weston and Watkins(1999) and Crammer and Singer(2000), respectively. In this research, we used corporate information of 154 companies listed on KOSDAQ market in Korea exchange. We obtained companies' financial information of 2005 from the KIS(Korea Information Service, Inc.). Using this data, we made multi-class rating with DEA efficiency and built multi-class prediction model based data mining. Among three manners of multi-classification, the hit ratio of the Weston and Watkins method is the best in the test data set. In multi classification problems as efficiency ratings of venture business, it is very useful for investors to know the class with errors, one class difference, when it is difficult to find out the accurate class in the actual market. So we presented accuracy results within 1-class errors, and the Weston and Watkins method showed 85.7% accuracy in our test samples. We conclude that the DEA based multi-class approach in venture business generates more information than the binary classification problem, notwithstanding its efficiency level. We believe this model can help investors in decision making as it provides a reliably tool to evaluate venture companies in the financial domain. For the future research, we perceive the need to enhance such areas as the variable selection process, the parameter selection of kernel function, the generalization, and the sample size of multi-class.

• Trans-
• /
• v.9
• /
• pp.17-36
• /
• 2020

This study is aimed at discussing the possibility of content production, utilization and expansion, focusing on the exhibition case of Danwon Art Museum run by Ansan Cultural Foundation. In 1991, the Ministry of Culture, Sports and Tourism named Ansan as the City of Danwon since it is believed to be the hometown of Danwon Kim Hong-do (1745~?), a painter of the late Joseon Dynasty and a well-known master of genre painting. As a result, Ansan is making various efforts to utilize Danwon Kim Hong-do for its unique resource through internal and external business such as the creation of Danwon Sculpture Park, the operation of Danwon Art Museum, and the planning of Danwon Kim Hong-do Festival. However, the biggest problem with Ansan is that there are not many collections of Kim Hong-do. Ansan has owned a total of six works as of May this year: a deer and a boy, flowers and a bird, A view of clouds on the water, Daegwallyeong, Yeodongbin, A way to Singwangsa. Accordingly, Danwon Contents Center has set up a vision to systematically collect, preserve, and display various visual and artistic materials related to Kim Hong-do, offering high-quality information based on digital data. In other words, it is a complex cultural information agency of One-Source Multi-Use, which combines the functions of libraries, archives and art galleries so that visitors' desire is satisfied. It reflects the contemporary trend of overcoming the limitations of the ancient paintings and satisfying the role and function of the art museum. From the opening of the Danwon Contents Hall, the original work of Kim Hong-do has been interpreted and produced as media contents or recreated as a new form of art by modern artists. Exhibition using technologies such as touch screen and 'deep zoom' helps visitors to heighten their experience of the archives and get inside the world of the genius painter.

• Journal of Climate Change Research
• /
• v.5 no.2
• /
• pp.95-107
• /
• 2014

The 'Green Start Movement' is a practical movement of green living to efficiently reduce the greenhouse gases originating from non-industrial fields such as household, commerce, transportation, etc. for the 'materialization of a low carbon society through green growth (Low Carbon, Green Korea)'. When the new government took office, following the Lee Myeongbak Administration that had presented 'Low Carbon, Green Growth' as a national vision, it was required to set up the direction of the practical movement of green life to respond to climate change persistently and stably as well as to evaluate the performance of the green start movement over the past 5 years. A questionnaire survey was administered to a total of 265 persons including public servants, members of environmental and non-environmental NGOs, participants of the green start movement and professionals. In the results of the questionnaire survey, many opinions have indicated that the awareness of the green start movement is increasing and the green start movement has had a positive impact on individual behavior and group behavior in terms of green living. The result shows, however, that the environmental NGOs don't cooperate sufficiently to create a 'green living' effect on a national scale. Action needs to be taken on the community level in order to generate a culture of environmental responsibility. The national administration office of the Green Start Movement Network should play the leading role between the government and environmental NGOs. The Green Start National Network should have greater autonomy and governance of the network needs to be restructured in order to work effectively. Also the Green Start Movement should identify specific local characteristics to support activities that reduce greenhouse gas emissions. Best practices can be shared to reduce greenhouse gas emissions by a substantial amount.

• Journal of Distribution Research
• /
• v.17 no.1
• /
• pp.65-86
• /
• 2012

The $20^{th}$ century was the era of manufacturer brands which built higher brand equity for consumers. Consumers moved from generic products of inconsistent quality produced by local factories in the $19^{th}$ century to branded products from global manufacturers and manufacturer brands reached consumers through distributors and retailers. Retailers were relatively small compared to their largest suppliers. However, sometime in the 1970s, things began to slowly change as retailers started to develop their own national chains and began international expansion, and consolidation of the retail industry from mom-and-pop stores to global players was well under way (Kumar and Steenkamp 2007, p.2) In South Korea, since the middle of the 1990s, the bulking up of retailers that started then has changed the balance of power between manufacturers and retailers. Retailer private labels, generally referred to as own labels, store brands, distributors own private-label, home brand or own label brand have also been performing strongly in every single local market (Bushman 1993; De Wulf et al. 2005). Private labels now account for one out of every five items sold every day in U.S. supermarkets, drug chains, and mass merchandisers (Kumar and Steenkamp 2007), and the market share in Western Europe is even larger (Euromonitor 2007). In the UK, grocery market share of private labels grew from 39% of sales in 2008 to 41% in 2010 (Marian 2010). Planet Retail (2007, p.1) recently concluded that "[PLs] are set for accelerated growth, with the majority of the world's leading grocers increasing their own label penetration." Private labels have gained wide attention both in the academic literature and popular business press and there is a glowing academic research to the perspective of manufacturers and retailers. Empirical research on private labels has mainly studies the factors explaining private labels market shares across product categories and/or retail chains (Dahr and Hoch 1997; Hoch and Banerji, 1993), factors influencing the private labels proneness of consumers (Baltas and Doyle 1998; Burton et al. 1998; Richardson et al. 1996) and factors how to react brand manufacturers towards PLs (Dunne and Narasimhan 1999; Hoch 1996; Quelch and Harding 1996; Verhoef et al. 2000). Nevertheless, empirical research on factors influencing the production in terms of a manufacturer-retailer is rather anecdotal than theory-based. The objective of this paper is to bridge the gap in these two types of research and explore the factors which influence on manufacturer's private label production based on two competing theories: S-C-P (Structure - Conduct - Performance) paradigm and resource-based theory. In order to do so, the authors used in-depth interview with marketing managers, reviewed retail press and research and presents the conceptual framework that integrates the major determinants of private labels production. From a manufacturer's perspective, supplying private labels often starts on a strategic basis. When a manufacturer engages in private labels, the manufacturer does not have to spend on advertising, retailer promotions or maintain a dedicated sales force. Moreover, if a manufacturer has weak marketing capabilities, the manufacturer can make use of retailer's marketing capability to produce private labels and lessen its marketing cost and increases its profit margin. Figure 1. is the theoretical framework based on a strategic market management perspective, integrated concept of both S-C-P paradigm and resource-based theory. The model includes one mediate variable, marketing capabilities, and the other moderate variable, competitive intensity. Manufacturer's national brand reputation, firm's marketing investment, and product portfolio, which are hypothesized to positively affected manufacturer's marketing capabilities. Then, marketing capabilities has negatively effected on private label production. Moderating effects of competitive intensity are hypothesized on the relationship between marketing capabilities and private label production. To verify the proposed research model and hypotheses, data were collected from 192 manufacturers (212 responses) who are producing private labels in South Korea. Cronbach's alpha test, explanatory / comfirmatory factor analysis, and correlation analysis were employed to validate hypotheses. The following results were drawing using structural equation modeling and all hypotheses are supported. Findings indicate that manufacturer's private label production is strongly related to its marketing capabilities. Consumer marketing capabilities, in turn, is directly connected with the 3 strategic factors (e.g., marketing investment, manufacturer's national brand reputation, and product portfolio). It is moderated by competitive intensity between marketing capabilities and private label production. In conclusion, this research may be the first study to investigate the reasons manufacturers engage in private labels based on two competing theoretic views, S-C-P paradigm and resource-based theory. The private label phenomenon has received growing attention by marketing scholars. In many industries, private labels represent formidable competition to manufacturer brands and manufacturers have a dilemma with selling to as well as competing with their retailers. The current study suggests key factors when manufacturers consider engaging in private label production.

• Journal of Technology Innovation
• /
• v.5 no.2
• /
• pp.1-21
• /
• 1997

The objective of this paper is to think about what structural reforms of the Korean government S&T development management system might be. Korean society is currently experiencing a drastic socio-economic transformation. The results of this transformation should be reflected on the determining process of the directions and breadths of structural reforms of government S&T development management system. Because the government system design will be based on the premises of socio-economic conditions under which administrative activities perform and also this socio-economic changes can influence on changes of the premises of government management system design. Moreover, S&T development management system is a subsystem of government system so that the directions of structural reform of those subsystems should be considered in the broad framework changes in the development management system of the government. For the last forty years, the Korean government S&T development management system has been based on the premises including transformation from an agrarian society to an industrial society, authoritarianism and centrally controlled institutions, and exteremely small portions of private investments for science and thechonology R & D of the total. Recently, however, the premises of Korean government S&T development management system have rapidly changed. the characteristics of these changes are including tranformation from an industrial society to a knowledge and information intensive society, globalization, localization, and relatively large portion of private investments for science and technology R & C of the total. The basis of government reforms in Korea was the realization of the performances and values through the enhancement of national competitive capacity, attainment of lean government, decentralization and autonomy. However, the Korean government has attached a symbolic value of strategic organizations representing strong policy intentions of government for the science and technology based development. Most problems associated with the Korean government S&T development management system have grown worse during 1990s. Many people perceive that considerable part of this problem was generated because the government could not properly adapt itself to new administrative environment and the paradigm shift in its role. First of all, the Korean government S&T development management system as a whole failed to develop an integrated vision under which processes in formulating science and thechology development goals and developing consistent government plans concerning science and technology development are guided. Second, most of the local governments have little organizational capacity and manpowers to handle localized activities to promote science and technology in their regions. Third, the measure to coordinate and set priorities to invest resources for the development of science and technology was not effective. Fourth, the Most has been losing its reputation as the symbol of ideological commitment of the top policy maker to promote science and technology. Various ideas to reform government S&T development management system have been suggested recently. Most frequently cited ideas are as follow : (ⅰ)strengthen the functions of MoST by supplementing the strong incentive and regulatory measures; (ⅱ)create a new Ministry of Education, Science & Technology and Research by merging the Ministry of Education and the MoST; (ⅲ)create a new Ministry of Science & Technology and Industry ; and(ⅳ)create a National Science and Technology Policy Council under the chairmanship of the President. Four alternatives suggested have been widely discussed among the interested parties and they each have merits as well as weaknesses. The first alternative could be seen as an alternative which cannot resolve current conflicts among various ministries concerning priority setting and resource allocation. However, this alternatives can be seen as a way of showing the top policymaker's strong intention to emphasize science and technology based development. Second alternative is giving a strategic to emphasize on the training and supplying qualified manpower to meet knowledge and information intensive future society. This alternative is considered to be consistent with the new administrative paradigm emphasizing lean government and decentralization. However, opponents are worrying about the linkages and cooperative research between university and industry could be weakening. The third alternative has been adopted mostly in nations which have strong basic science research but weak industrial innovation traditions. Main weakness of this alternative for Korea is that Korean science and technology development system has no strong basic science and technology research traditions. The fourth alternative is consistent with new administrative paradigms and government reform bases. However, opponents to this alternative are worried that the intensive development of science and technology because of Korea's low potential research capabilities in science and technology development. Considerning the present Korean socio-economic situation which demands highly qualified human resources and development strategies which emphasizes the accumulations of knowledge-based stocks, I would like to suggest the route of creating a new Ministry of Education, Science & Technology and Research by intergrating education administration functions and science & technology development function into one ministry.

• The Korean Journal of Air & Space Law and Policy
• /
• v.4
• /
• pp.7-35
• /
• 1992

The expansion of air transport on a global scale with ever increasing traffic densities has brought about problems that must be solved through new multilateral mechanisms. Looking to the immediate future, air transport will require new forms of international cooperation in technical and economic areas. Air transport by its very nature should have been a counterforce to nationalism. Yet, the regulatory system in civil aviation is still as firmly rooted in the principle of national sovereignty as when it was first proclaimed at t-11e Paris Convention of 1919 and reaffirmed in the Chicago Convention. Sovereignty over the airspace has remained the cornerstone of relations between states in all respects of air transport. The importance of sovereignty over air space embodied in article 1 of the Chicago Conrenton also is responsible for restricting the authority of ICAO as an intergovernmental regulatory agency. The Orgenization, for all its extensive efforts, has only limited authority. ICAO sets standards but cannot enforce them; it devises solutions but cannot impose them. To implement its rules ICAO most rely not so much on legal requirements as on the goodwill of states. It has been forty-eight years since international community set the foundations of the international system in civil aviation action. Profound political, economic and technological changes have taken place in air transport. The Chicago Convention is living proof that staes can work together to make air transport a safe mode of travel. The law governing international civil auiation is principally based on international treaties and on other regulation agreed to by governments, for the most part through the mechanism of ICAO. The role of ICAO international standards and recommended practices and procedures dealing with a broad range of technical matters could hardly be overestimated. The organization's ability to develop these standards and procedures, to adapt them continuously to the rapid sate of change and development of air transport, should be particularly stressed. The role of ICAO in the area of the development of multilateral conventions on international air law has been successful but to a certain degree. From the modest starting-point of the Tokyo Convention, we have seen more adequate international instruments prepared within the scope of ICAO activities, adopted: the Hague Convention of 1970 for the suppression of Unlawful Seizure of Aircraft and the Montreal Convention of 1971 for the Suppression of Unlawful Acts against the Safety of Civil Aviation. The work of ICAO in the new domain of international law conventions concerning what has been loosely termed above as the criminal problems connected with international air transport, in particular the problem of armed aggression against aircraft, should be positively appreciated. But ICAO records in the domain of developing a uniform legal system of international carriage by air are rather disappointing. The problem of maintaining and developing the uniformity of this regulation exceeds the scope of interest and competence of governmental transport agencies. The expectations of mankind linked to it are too great to give up trying to restore the uniform legal system of international air carriage that would create proper conditions for its further growth. It appears that ICAO has, at present, a good opportunity for doing this. The hasty preparation of ICAO draft conventions should be definitely excluded. Every Preliminary draft convention ought to be sent to Governments of all member-States for consideration, So that they could in form ICAO in due time of their observation. The problom of harmonizing a uniform law of international air carriage with that of other branches of international transport should demand more and more of its attention. ICAO cooperation with other international arganization, especially these working in the field of international transport, should be strengthened. ICAO is supposed to act as a link and a mediator among, at times the conflicting interests of member States, serving the happiness and peace of all of the world. The transformation of the contemporary world of developing international relations, stimulated by steadily growing international cooperation in its various dimensions, political, economic, scientific, technological, social and cultural, continuously confronts ICAO with new task.

• Nuclear Engineering and Technology
• /
• v.39 no.5
• /
• pp.603-616
• /
• 2007

Roy Huddle, having invented the coated particle in Harwell 1957, stated in the early 1970s that we know now everything about particles and coatings and should be going over to deal with other problems. This was on the occasion of the Dragon fuel performance information meeting London 1973: How wrong a genius be! It took until 1978 that really good particles were made in Germany, then during the Japanese HTTR production in the 1990s and finally the Chinese 2000-2001 campaign for HTR-10. Here, we present a review of history and present status. Today, good fuel is measured by different standards from the seventies: where $9*10^{-4}$ initial free heavy metal fraction was typical for early AVR carbide fuel and $3*10^{-4}$ initial free heavy metal fraction was acceptable for oxide fuel in THTR, we insist on values more than an order of magnitude below this value today. Half a percent of particle failure at the end-of-irradiation, another ancient standard, is not even acceptable today, even for the most severe accidents. While legislation and licensing has not changed, one of the reasons we insist on these improvements is the preference for passive systems rather than active controls of earlier times. After renewed HTGR interest, we are reporting about the start of new or reactivated coated particle work in several parts of the world, considering the aspects of designs/ traditional and new materials, manufacturing technologies/ quality control quality assurance, irradiation and accident performance, modeling and performance predictions, and fuel cycle aspects and spent fuel treatment. In very general terms, the coated particle should be strong, reliable, retentive, and affordable. These properties have to be quantified and will be eventually optimized for a specific application system. Results obtained so far indicate that the same particle can be used for steam cycle applications with $700-750^{\circ}C$ helium coolant gas exit, for gas turbine applications at $850-900^{\circ}C$ and for process heat/hydrogen generation applications with $950^{\circ}C$ outlet temperatures. There is a clear set of standards for modem high quality fuel in terms of low levels of heavy metal contamination, manufacture-induced particle defects during fuel body and fuel element making, irradiation/accident induced particle failures and limits on fission product release from intact particles. While gas-cooled reactor design is still open-ended with blocks for the prismatic and spherical fuel elements for the pebble-bed design, there is near worldwide agreement on high quality fuel: a $500{\mu}m$ diameter $UO_2$ kernel of 10% enrichment is surrounded by a $100{\mu}m$ thick sacrificial buffer layer to be followed by a dense inner pyrocarbon layer, a high quality silicon carbide layer of $35{\mu}m$ thickness and theoretical density and another outer pyrocarbon layer. Good performance has been demonstrated both under operational and under accident conditions, i.e. to 10% FIMA and maximum $1600^{\circ}C$ afterwards. And it is the wide-ranging demonstration experience that makes this particle superior. Recommendations are made for further work: 1. Generation of data for presently manufactured materials, e.g. SiC strength and strength distribution, PyC creep and shrinkage and many more material data sets. 2. Renewed start of irradiation and accident testing of modem coated particle fuel. 3. Analysis of existing and newly created data with a view to demonstrate satisfactory performance at burnups beyond 10% FIMA and complete fission product retention even in accidents that go beyond $1600^{\circ}C$ for a short period of time. This work should proceed at both national and international level.

• Journal of Arbitration Studies
• /
• v.14 no.1
• /
• pp.273-314
• /
• 2004

There is a belief in the construction industry that the traditional court system may not be an ideal forum to effectively and efficiently resolve construction disputes due to the protracted proceedings and the three tier appeal system resulting in a long delay in the final and conclusive settlement of the dispute, relatively high costs involved, the lack of requisite knowledge and experience in the relevant industry, etc. Hence, they assert that certain alternative dispute resolution ('ADR') methods, such as mediation, conciliation, arbitration or a new system for dispute settlement in the form of any combination thereof should be developed and employed for construction disputes so as to resolve them more promptly and efficiently to the satisfaction of all the disputants concerned. This paper discusses certain merits of such assertions and the need for additional considerations for effective resolution of the construction disputes in light of the complexity of the case, importance of expert witnesses, parties' relationship and non-level playing field of the construction industry and so on. At the same time, however, given the inherent nature of disputes rendering the parties involved in an adversarial position, it would rather be difficult, if not practically impossible, to satisfy all the parties concerned in the dispute. Accordingly, in this study, it is also purported to address the demerits of such assertions by studying the situation from a more balanced perspective, in particular, in relation to the operation of such ADRs. In fact, most of such ADRs as stipulated by special acts, such as the Construction Industry Basic Act of Korea, in the form of mediation or conciliation, have failed to get support from the industry, and as a result, such ADRs are seldom used in practice. Tn contrast, the court system has been greatly improved by implementing a new concentrated review system and establishing several tribunals designed to specialize in the review and resolution of specific types of disputes, including the construction disputes. These improvements of the court system have been warmly received by the industry. Arbitration is another forum for settlement of construction disputes, which has grown and is expected to grow as the most effective ADR with the support from the construction industry. In this regard, the Korean Commercial Arbitration Board ('KCAB') has established a set of internal rules end procedures in operation to efficiently handle construction disputes. Considering the foregoing, this paper addresses the most important elements of the arbitration, i.e., arbitration agreement and arbitral award, primarily focusing on the domestic arbitrations before the KCAB. However, since this parer is prepared for presentation at the construction disputes seminar for the public audience, it is not intended for academic purposes, nor does it delve into any specific acadcmic issues. Likewise, although this paper addresses certain controversial issues by way of introduction, it mainly purports to facilitate the understanding of the general public, including the prospective arbitrators on the KCAB roster without the relevant legal education and background, concerning the importance of the integrity of the arbitration agreement and the arbitral award. In sum, what is purported in this study is simply to note that there are still many outstanding issues with mediation, conciliation and arbitration, as a matter of system, institutional operation or otherwise, for further study and consideration so as to enhance them as effective means for settlement of construction disputes, in replacement of or in conjunction with the court proceeding. For this purpose, it is essential for all the relevant parties, including lawyers, engineers, owners, contractors and social activists aiming to protect consumers' and subcontractors' interests, to conduct joint efforts to study the complicated nature of construction works and to develop effective means for examination and handling of the disputes of a technical nature, including the accumulation of the relevant industrial data. Based on the foregoing, the parties may be in a better position to select the appropriate dispute resolution mechanism, a court proceeding or in its stead, an effective ADR, considering the relevant factors of the subject construction works or the contract structure, such as the bargaining position of the parties, their financial status, confidentiality requirements, technical or commercial complexity of the case at hand, urgency for settlements, etc.

• Proceedings of The Korean Society of Health Promotion Conference
• /
• 2004.10a
• /
• pp.59-88
• /
• 2004

' Healthy Japan 21 ' is a new health policy that has been proposed for the 21st century: it embodies a totally new concept for its viewpoints and methods. To start with, for its goal, the focus is placed on the ' quality of life ' or a life that is tree of diseases, rather than mere prolongation of life. For its doctrine, the emphasis has shifted dramatically from improving the health of the entire population (the traditional approach for health improvement) to ' achieving an ideal health status for each individual. The ultimate aged society that arrives first in Japan is a society in its ultimate form for human being. Why did Japan become westernized, giving up her traditional culture? Why did she go through industrialization, sacrificing her nature? And why does she try so hard to industrialize the developing countries? These efforts are all preparation for the arrival of a ultimate aged society. During the 20th century, we believed in unlimited possibilities and expanded our social frontier. 1n the 21st century, on the other hand, a super-aged society (the ultimate society), a glimpse of which we have witnessed from time to time, will descend on us sooner or later. It is expected to arrive first in Japan. ' Healthy Japan 21 ' is intended to prepare for the arrival of the hitherto unheard of super-aged society by building the physiological basis of people. This policy is social experimentation on an immense social scale, in which questions are posed on the understanding of health, the relationship between individuals and society, the relationship between administration and citizens, the manner by which central and local governments operate, and the new relationship between prevention and therapy. ' Healthy Japan 21 ' may be summarized as an experiment on a huge scale directed to the ultimate form of human society, in which Japan and each of her citizens playa role and set an example for the rest of the world. Even just by considering various approaches newly suggested for this venture, one may be convinced that it is a policy with features suitable for a country that has already achieved the world's highest longevity.