• Bulletin of the Korean Chemical Society
• /
• 제23권9호
• /
• pp.1304-1323
• /
• 2002

Superconducting BiSrCaCu(Ni)O ceramicss have been prepared by the gel method using an aqueous solution containing a tartaric acid. The aqueous solution of metal salts was concentrated without precipitation. The precursor so prepared was homogeneou s and calcined at $825^{\circ}C$ for 24 h to produce superconducting phase. The thermal decomposition of gels, the formation of superconducting phase, and their ceramic microstructure were studied using IR, TGA, XRD, resistance measurements, and SEM. This method is highly reproducible and leads to powders with excellent homogeneity and small particle size for easy sinterability. The nickel dopant substituting for Cu gives rise to the gradual decrease of the Tc. Phase pure 2212 ceramics were obtained at 825 $^{\circ}C$ for 24 h. SEM pictures showed that liquid phase was formed when the samples were sintered temperatures higher than 825 $^{\circ}C$.

• 한국산학기술학회논문지
• /
• 제5권6호
• /
• pp.511-514
• /
• 2004

프레스금형의 부품 중에서 펀치와 다이플레이트를 제작하는 방법은 공작기계만을 사용하여 제작하는 경우와 공작기계와 와이어 컷 방전가공기(W-EDM)를 병행 사용하는 경우가 있다. 그런데 공작기계만을 사용하여 제작 할 때는 금형수명(Die Life)이 200만-230만 스트로크였는데 와이어 컷 방전가공기를 사용한 제작에서는 70만-80만 스트로크에서 금형수명을 다하고 있다. 이것은 W-EDM후에 발생되는 가공변질층으로 예측되므로 W-EDM전과 W-EDM후의 가공면에 대한 SEM촬영을 실시하여 가공변질층의 발생여부를 확인하고 이에 대한 제거방법을 연구하고자 하였다.

• 패션비즈니스
• /
• 제12권6호
• /
• pp.1-10
• /
• 2008

Public interest in healthy hairs gets growing as damaged hairs are seen more frequently with the generalization of heat permanent waves. For this study, experiments have been conducted to understand the influences on the changes in physical and morphological features of wave forms and damaged hairs, by collecting virgin hairs from the women in their mid-20's, who had not experienced chemical applications, and by dividing the applications of heat perm hair treatments, PPT(for pre-treatment) and LPP(for post-treatment), into the pre-treatment, the post-treatment, the pre & post-treatment, and the non-treatment. For the wave formations, curl waves were investigated by the bare eyes using the pictures taken by a digital camera. For the comparison of physical features, the experiments of tensile strength and elongation were done and their mean values were found. For the observations of morphological features, the pictures were taken by SEM for comparison. As for the findings, regarding the curl wave shapes of hairs, the most even and elastic S curl was formed in the case of non-treatment. In the physical features, both of the tensile strength and elongation showed a decreasing tendency in line with the hair damage levels, and the case of the pre & post-treatment indicated the tendency most similar to the control group. In the morphological features of the cuticle, observed with an SEM, the pre-treatment showed the higher possibility of reducing the cuticle damages than the post-treatment did. LPP was found to play the role of protective membrane for the post-treatment, and the pre & post-treatment turned out to reduce most effectively the cuticle damages.

• 공업화학
• /
• 제7권1호
• /
• pp.186-193
• /
• 1996

몇 가지 키토산 비드들을 W/O 에멀젼법과 capillary extrusion법에 의해 제조하여, SEM 사진을 통해 표면 구조와 표면적의 차이를 관찰하였고, BET법으로 표면적을 측정하였으며, 피크린산 적정에 의해 유효 아민함량을 측정하여 상기 결과들과의 상관관계를 알아 보았다. W/O 에멀젼법에 의해 제조한 비드의 경우 capillary extrusion법에 의해 제조된 비드들보다 입자의 크기가 작았으며, 반대로 표면적, 유효 아민함량은 높게 나타났다. 또한 비드의 표면적, 유효 아민함량, 겉보기 밀도(apparent density) 및 기계적 강도(hardness)는 제조시 건조방법에 따라 매우 큰 편차를 나타내었다. Hardness 측정결과 solvent dehydration법에 의해 건조된 비드들이 동결건조법에 의해 건조된 비드들에 비해 높은 강도를 나타내었다. 또한 겉보기 밀도에 있어서도 solvent dehydration한 비드들이 동결건조한 비드들에 비해 높은 겉보기 밀도를 보였다. SEM 사진 분석결과 solvent dehydration법에 의한 비드들은 매우 작은 pore들이 비드의 표면에 무수히 존재한 반면 동결건조한 비드에서는 벌집모양의 pore들이 존재하고 있음을 알 수 있었다. 피크린산 적정결과 solvent dehydration한 비드의 경우 동결건조한 비드보다 약 10배의 높은 유효 아민함량을 나타내었으며 비드의 표면적이 클수록 유효 아민함랑은 높게 나타났다. 또한 fluorescamine을 반응시킨 후 형광현미경으로 관찰하여 비드의 표면과 내부의 pore 주위에 노출된 1차 아민의 존재를 정성적으로 확인할 수 있었다.

• Elastomers and Composites
• /
• 제42권3호
• /
• pp.177-185
• /
• 2007

유기화된 montmorillonite(O-MMT)와 인을 포함하는 polyamic acid(PPAA)를 용액 블렌딩하여 PAA/organoclay 나노 복합체를 제조하였다. 이들 나노 복합체들의 연구를 위하여 FT-IR, DSC, TGA, PCFC, SEM 그리고 XRD를 이용하였다. 나노복합체들의 제조확인은 FT-IR과 XRD 분석을 통하여 확인하였다. SEM 사진들은 O-MMT가 매트릭스 고분자에 비교적 고르게 분산되어 있음을 보여 주었고, XRD 결과를 통하여 O-MMT가 intercalation 되었음을 확인하였다. O-MMT/PPAA 나노복합체들의 열안정성 및 난연성은 순수한 PAA 보다 크게 높았으며, O-MMT/PPAA-0.2, 0.4, 0.6 복합체들의 열방출 용량과 총열방출 값들은 인의 함량 증가와 함께 감소하였다. 본 연구에서 제조된 나노복합체 필름들이 화재안전재료로서 사용될 수 있는 잠재성을 가지고 있음을 확인하였다.

• Membrane and Water Treatment
• /
• 제5권2호
• /
• pp.73-86
• /
• 2014

Membrane fouling is a major challenge limiting the use of membrane applications. In this study high induced shear rates were utilized at the membrane surface in order to reduce the organic and inorganic scaling by using the torsional vibration of flat sheet membranes. The performances of a vibratory shear-enhanced processing (VSEP) system for the ultrafiltration (UF), nanofiltration (NF) and reverse osmosis (RO) membrane filtration of industrial dairy wastewater were investigated. The vibration and non-vibration methods were compared with the same membrane and operational parameters during the purification of real dairy industrial process wastewater. In the initial experiments, short-term tests were carried out in which the effects of vibration amplitude, recirculation flow rate and transmembrane pressure were measured and compared. The permeate flux, turbidity, conductivity and chemical oxygen demand (COD) reduction of dairy wastewater were investigated by using UF, NF and RO membranes with vibration and non-vibration methods. In the subsequent experiments, concentration tests were also carried out. Finally, scanning electron microscopy (SEM) revealed that the vibration method gave a better performance, which can be attributed to the higher membrane shear rate, which reduces the concentration of solids at the membrane, and the transmission.

• 대한가정학회지
• /
• 제46권10호
• /
• pp.1-9
• /
• 2008

The purpose of this study was to increase uv-cut ability of cotton, ramie, and rayon fabrics dyed with safflower red colorants. For this purpose, samples treated with uv-cut agent and tannic acid were compared with the untreated samples after ultraviolet(uv)-light exposure in terms of K/S value, color changes(${\Delta}E$), SEM, and tensile strength retention. K/S value rapidly decreased with increasing exposure time, but K/S value of the samples treated with both uv-cut agent and tannic acid decreased less than that of untreated samples. As increasing exposure time, $L^*$ and $b^*$ increased, $a^*$ decreased, and so ${\Delta}E$ increased, indicating less red character and more yellow character in color. This leads to change hue, value and chroma value. But color change of samples treated with both uv-cut agent and tannic acid was less than that of untreated samples. SEM pictures showed a severe degradation by uv exposure in all samples. Tensile strength slowly decreased for 21 days. And after this point, the decreased proceeded more rapidly. Tensile strength retention of the samples treated with uv-cut agent and tannic acid was higher than that of untreated samples.

• Carbon letters
• /
• 제7권1호
• /
• pp.34-41
• /
• 2006

The objective of this paper is to compare the variation of surface properties by hydrochloric acid pre-treatment and of metallic potassium and their salts loading effect for activated carbon after surfaces transformation by acid. From the results of nitrogen adsorption, each isotherm shows a distinct knee band, which is closely related to the characteristic of microporous carbons with capillary condensation in micropores. In order to present the causes of the differences in surface properties and $S_{BET}$ after the samples were treated with hydrochloric acid, pore structure and surface morphology are investigated by adsorption analysis. X-ray diffraction (XRD) patterns indicate that activated carbons show better performance for metallic potassium and potassium salts by pre-treatment with hydrochloric acid. Scanning electron microscopy (SEM) pictures of potassium/activated carbon particles provide information about the homogeneous distribution of metal or metal complex on the surface. For the chemical composition microanalysis for potassium treatment of the activated carbon pre-treated with hydrochloric acid, samples were analyzed by energy disperse X-ray (EDX). Finally, the type and quality of oxygen groups are determined from the method proposed by Boehm. A positive influence of the acidic groups on the carbon surface by acid treatment is also demonstrated by an increase in the contents of potassium salts with increasing of acidic groups calculated from Boehm titration.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.1118-1120
• /
• 2003

For LCD-TVs with full capability to show moving pictures and LCD monitors for multi media use, it is necessary that the switching times of Liquid Crystal (LC) mixtures are within one frame (16.7ms). In order to achieve faster switching times, new LC materials have been identified, mainly focusing on the further reduction of the rotational viscosity (${\gamma}1$).

• 구강회복응용과학지
• /
• 제19권4호
• /
• pp.309-315
• /
• 2003

When the exposure surface of restoration is brushed with various toothpaste in the mouth, wear or undesirable surface deposit of restoration can occur. Surface change of gallium alloys according to brushing and toothpaste may directly affect oral hygiene. The aim of this study was to evaluate the surface alterations of Gallium alloys during tooth brushing with different prophylactic agents. Two gallium-alloys and an amalgam as a control were investigated. Without and with brushing were applied with three kinds of prophylactic agents on the sample for 0, 1, 5, 10, 60 and 360 minutes. At each time interval, surface roughness was recorded by a profilometer and some pictures were taken by a SEM. All results were analyzed by the one-way ANOVA, followed by Tukey multiple comparisons and the simple linear regression analysis. The results indicate that gallium alloys are more susceptible to surface degradation during tooth brushing than amalgam with respect to the specific prophylactic agent used.