• 치위생과학회지
• /
• 제18권6호
• /
• pp.367-373
• /
• 2018

시판 중인 어린이 음료가 레진계 치면열구전색제에 미치는 물리 화학적 영향을 알아보기 위해 판매량이 높은 3종의 어린이 음료와 대조군으로 생수를 선정하였다. 제조사의 지시에 따라 레진 시편을 제작하여 시편의 초기 거칠기 값(Ra)를 측정하였고, 각 음료의 pH를 측정한 후, 레진 시편을 각각의 음료에 침지시켜 $37^{\circ}C$ 배양기에서 72시간 보관하였다. 72시간 후 레진 시편의 표면 거칠기를 측정하였고 시편 표면의 형태변화 관찰을 위해 주사전자현미경으로 관찰하였다. 레진 시편에서 용출된 단량체의 종류 및 용출량은 HPLC를 이용하여 비교 분석하였다. 생수를 제외한 모든 실험음료에 구연산이 첨가되어 있었고 어린이 음료의 평균 pH는 $3.25{\pm}0.17$로 '아이키커'에서 $3.03{\pm}0.01$로 가장 낮았고 '뽀로로'에서 $3.47{\pm}0.02$로 가장 높았다. 어린이 음료에 침지 후 시간 경과에 따른 표면 거칠기가 증가하였고 레진 시편의 표면에 기질의 탈락을 관찰하였다. 모든 실험음료에서 bis-GMA는 유출되지 않았으나 생수를 제외한 어린이 음료에서는 TEGDMA가 유출되었다. 이상의 결과 어린이 음료는 치면열구전색제의 열화와 단량체의 유리를 촉진할 수 있으며 유리된 단량체는 성장 중인 어린이에게 더 큰 영향을 미칠 수 있으므로 어린이 음료를 빈번히 음용하는 것은 주의가 필요하다.

• 한국인쇄학회지
• /
• 제29권1호
• /
• pp.23-33
• /
• 2011

This experimental focus to characterize luminescence properties related to CNT (Carbon Nano Tube) element dispersedly implanted in ZnS-based phosphor thin film panel fabricated by a screen printing method. More specifically FE-SEM measurements, L-V(Luminescence vs. Voltage) and photo luminescence were carried out to determine an optimum value of CNT concentration and film thickness for the thin film structure of CNT-ZnS:(Cu, Al) by the screen printing method. We confirmed that an optimum value of CNT concentration in the ZnS:(Cu, Al) film panel is about 0.75 wt% resulting that the electric conductivity is 1.6 times higher than that of pure CNT sample and showing that the luminescence intensity is increasing until the optimum concentration. Clearly, CNT is presenting in the luminescence process providing a pathway for the creation of hot electron and a channel for the electron-hole recombination but overly inserted CNT may hinder to produce the hot electron for making an avalanching process. In case of the overly doped CNT 1.0 wt% in the ZnS-based phosphor, the luminescence intensity is decreasing although the electric conductivity is exponentially increasing. Based on these results, we realized that hot electron occurred by the external electric field or exciton arose by the external photon source are reduced dramatically over the critical value of CNT concentration because CNT element provide various isolated residues in the composites of ZnS based phosphor rather than pathway or channel for the D-A(Donnor to Acceptor) pair transition or the radiative recombination of electron-hole.

• Restorative Dentistry and Endodontics
• /
• 제19권1호
• /
• pp.1-26
• /
• 1994

The purpose of this study was to investigate the dissolution components during corrosion of amalgams and to identify surface corrosion products in the modified Fusayama artificial saliva. Four type of amalgam alloys were used: low copper lathe cut amalgam alloy (Cavex 68), low copper spherical amalgam alloy (Caulk Spherical Alloy), high copper admixed amalgam alloy (Dispersalloy) and high copper single composition amalgam alloy (Tytin). Each amalgam alloy and Hg were triturated according to the manufacturer's direction by means of mechanical amalgamator (Capmaster, S.S.White), and then the triturated mass was inserted into the cylindrical metal mold which was 10mm in diameter and 2.0mm in height and condensed with compression of 150kg/$cm^2$ using oil pressor. The specimens were removed from the mold and stored at room temperature for 7 days and cleansed with distiled water for 30 minutes in an ultrasonic cleaner. The specimens were immersed in the modified Fusayama artificial saliva for the periods of 1 month, 3 months and 6 months. The amounts of Hg, Cu, Sn and Zn dissolved from each amalgam specimen immersed in the artificial saliva for the periods of 1 month, 3 months and 6 months were measured using Inductivity Coupled Plasma Atomic Emission Spectrometry (ICPQ-1000, Shimadzu, Japan) and amount of Ag dissolved from amalgam specimen was measured using Atomic Absorption Spectrophotometry (Atomic Absorption/Flame emission spectrophotometer M-670, Shimadzu, Japan). A surface corrosion products of specimens were analysed using Electron Spectroscopy Chemical Analyser (ESCA PHI-558, PERKIN ELMER, U.S.A.). The secondary image and back scattered image of corroded surface of specimens was observed under the SEM, and the corroded surface of specimens was analysed with the EDX. The following results were obtained. 1. The dissolution amount of Cu was the most in high copper admixed amalgam(Dispersalloy) and the least in high copper single composition amalgam(Tytin). 2. Sn and Zn were dissolved during all the experiment periods, and dissolution amounts were decreased as the time elapsed. 3. Initial surface corrosion products were ZnO and SnO. 4. Corrosion of ${\gamma}$ and ${\gamma}_2$ phase in low copper amalgams was observed and Ag-Cu eutectic alloy phase was corroded in low copper spherical amalgam(Caulk Sperical Alloy). 5. Corrosion of ${\gamma}$ and $\eta$' phase in high copper amalgams was observed and Ag-Cu eutectic alloy phase was corroded in high copper admixed amalgam(Dispersalloy). 6. Sn-Cl was produced in the subsurface of low copper amalgams and high copper admixed amalgam.

• Transactions on Electrical and Electronic Materials
• /
• 제16권2호
• /
• pp.90-94
• /
• 2015

In this study, the characterizations of oxide contact hole etching are investigated with C₄F₈/O₂/Ar and CH₂F₂/C₄F₈/O₂/ Ar plasma. As the percent composition of C₄F₈ in a C₄F₈/O₂/Ar mixture increases, the amount of polymer deposited on the etched surface also increases because the C_xF_y polymer layer retards the reaction of oxygen atoms with PR. Adding CH₂F₂ into the C₄F₈/O₂/Ar plasma increases the etch rate of the oxide and the selectivity of oxide to PR. The profile of contact holes was close to 90°, and no visible residue was seen in the SEM image at a C₄F₈/(C₄F₈+O₂) ratio of 58%. The changes of chemical composition in the chamber were analyzed using optical emission spectroscopy, and the chemical reaction on the etched surface was investigated using X-ray photoelectron spectroscopy.

• 한국주조공학회지
• /
• 제17권6호
• /
• pp.560-568
• /
• 1997

The dissolution behavior of secondary solidification phases in squeeze cast Al-3.9wt%Cu-1.5wt%Si-1.0wt%Mg has been studied using a combination of optical microscope, image analyzer, scanning electron microscope(SEM), energy dispersive spectrometer(EDS), X-ray diffractometer(XRD) and differential thermal analyzer (DTA). Special emphasis was placed on the investigation of the effects of the nonequilibrium heat treatment on the dissolution of the second solidification phases. Ascast microstructure consisted of primary solidification product of ${\alpha}-Al$ and secondary solidification products of $Al_2Cu$, $Mg_2Si$ and $Al_2CuMg$. Equilibrium and non-equilibrium solution treatments were carried out at the temperatures of $495^{\circ}C$, $502^{\circ}C$ and $515^{\circ}C$ for 3 to 5 hours. The amount of the dissolved secondary phases increased with increasing solution treatment temperature, for example, area fractions of $Al_2Cu$, $Mg_2Si$ and $Al_2CuMg$ were approximately 0%, 1.6% and 4.2% after solution treatment at $495^{\circ}C$ for 5hours, and were approximately 0%, 0.36% and 2% after solution treatment at $515^{\circ}C$ for 5hours. The best combination of tensile properties was obtained when the as-cast alloy was solution treated at $515^{\circ}C$ for 3hours followed by aging at $180^{\circ}C$ for 10 hours. Detailed DTA and TEM study showed that the strengthening behavior during aging was due to enhanced precipitation of the platelet type fine ${\theta}'$ phase.

• Tribology and Lubricants
• /
• 제1권1호
• /
• pp.38-45
• /
• 1985

Ferrography 방법은 유체중 마모입자를 Substrate glass 위에 Van der Waals 힘에 의하여 분산교착 시키므로써 윤활 Systems에서의 기계요소들의 동특성적 마모진행과정및 mechanism의 정성적및 정량적인 분석을 가능케 한다. 정성적 방법으로는 광학현미경으로부터 SEM, X-Ray Emissiom, EDAX등의 분석방법이 적용되고 있으나, 정량적으로는 마모입자의 크기별 분포함수에 따른 Variance, Kurtosis, Skewness와 같은 인자함수의 변이가 마모진행 과정과 진행될 마모형태기구의 예측인자로서 연구되고 있다. 수치적 Model로 마모진행기구를 예측할 경우 third moment의 Skewness 가 Size 및 number분포에 따라 예민하게 반응을 나타내는 결과를 보이고 있다. 이러한 정량분석을 위하여는 실험 Sample에 따라서, 즉 오염도에 따른 Sample희석이 따르는데, 이러한 Sample 희석이 정량적 분포에 미치는 영향에 관한 연구결과는 아직 없다. 따라서 본연구에는 용제희석이 정량적 마모입자 분포에 미치는 영향을 image analyser인 Quantimat 720을 이용하여 검토하였으며 전영역의 희석률에 적용될 수 있는 Standard Calibration function에 따른 수학적 model을 유도하였다.

• 대한기계학회논문집B
• /
• 제34권4호
• /
• pp.349-354
• /
• 2010

연료전지는 환경문제와 천연자원 고갈을 해결할 수 있기 때문에 가장 주목받고 있는 새로운 동력원이다. 본 논문에서는 마이크로 연료전지의 효율을 높이기 위해 다양한 형상에 대해 마이크로 채널에서 수소가스 유동을 수치해석 하였다. 이미 개발된 채널과 새롭게 고안된 채널, 모두 여섯 개의 다른 형상을 가진 채널이 같은 유동 특성과 경계조건으로 수치해석을 수행하였다. 수치해석 결과를 통해 유속, 유동분포, 유동균일성 등이 채널형상에 따라 영향을 많이 받는 것을 알았다. 이에 수소 가스 유동을 고려한 채널형상 최적화를 통해 연료전지의 성능을 향상시키고자 하였다. 수치해석을 통한 최적화된 채널형상을 사용한 PEMFC 실험결과 평균보다 높은 전류밀도를 나타내었다. 그러나 내구성이 낮았다.

• 품질경영학회지
• /
• 제40권4호
• /
• pp.513-530
• /
• 2012

Purpose: The requirement for legal services is going up by modern people living in the era of complexity and variety who want to resolve legal conflicts between individuals and improve their personal rights. Methods: In this study, we used both literature and empirical researches to achieve our goals. In literature research, concept of service quality, method of measuring service quality, and dimension of service quality were explored, relationship among service quality, customer satisfaction, and customer loyalty and hypothesis was made based on the above, and tested. To test the conceptual framework, structural equation modeling (SEM) has been used to analyze the data collected from 252 customers of Judicial Agents's Service. Results: This result is not consistent with that of advanced study; it was found that service has significant influence on customer trust, and the trust also has significant influence on customer satisfaction and loyalty. Conclusion: This study has limitations in terms of restricted service sectors and measuring methods. For this reason, the followings are needed to be considered for interpretation and generalization of the study results. We believe that further studies are needed to investigate other service areas as well as legal service at the same time, and study target which is limited to Gangwon Province needs to be expanded for more accurate investigation. In addition, in-depth follow-up study should be proceeded considering variables such as customer value, conversion cost, and image of service providers.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2017년도 춘계공동학술대회
• /
• pp.107-107
• /
• 2017

3D bioprinting is a technology to produce complex tissue constructs through printing living cells with hydrogel in a layer-by-layer process. To produce more stable 3D cell-laden structures, various materials have been developed such as alginate, fibrin and gelatin. However, most of these hydrogels are chemically bound using crosslinkers which can cause some problems in cytotoxicity and cell viability. On the other hand, thermosensitive hydrogels are physically cross-linked by non-covalent interaction without crosslinker, facilitating stable cytotoxicity and cell viability. The examples of currently reported thermosensitive hydrogels are poly(ethylene glycol)/poly(propylene glycol)/poly(ethylene glycol) (PEG-PPG-PEG) and poly(ethylene glycol)/poly(lactic acid-co-glycolic acid) (PEG/PLGA). Chitosan, which have been widely used in tissue engineering due to its biocompatibility and osteoconductivity, can be used as thermosensitive hydrogels. However, despite the many advantages, chitosan hydrogel has not yet been used as a bioink. The purpose of this study was to develop a bioink by chitosan hydrogel for 3D bioprinting and to evaluate the suitability and potential ability of the developed chitosan hydrogel as a bioink. To prepare the chitosan hydrogel solution, ${\beta}-glycerolphosphate$ solution was added to the chitosan solution at the final pH ranged from 6.9 to 7.1. Gelation time decreased exponentially with increasing temperature. Scanning electron microscopy (SEM) image showed that chitosan hydrogel had irregular porous structure. From the water soluble tetrazolium salt (WST) and live and dead assay data, it was proven that there was no significant cytotoxicity and that cells were well dispersed. The chitosan hydrogel was well printed under temperature-controlled condition, and cells were well laden inside gel. The cytotoxicity of laden cells was evaluated by live and dead assay. In conclusion, chitosan bioink can be a candidate for 3D bioprinting.

• 대한방사선기술학회지:방사선기술과학
• /
• 제16권1호
• /
• pp.57-65
• /
• 1993

Asymetric system have been introduced in these years by KODAK company nam of Insight system for the purpose of improve the chest image. We have had a problem of chest radiology that it is very difficult to visualize the lung field and modiastinal region at one shot. That's why we are the RT using the technique of high voltage hard quality radiography in chest radiography. Also it is known the c-type wide latitude film can lift up the density of mediastinal structures. Authors investigated the photographic characteristics and physical structure of Insight system. Method 1. Investigated the structure of Emulsion layer. Calculated the particle size of Insight system using SEM(Scanning Electron Microscope). 2. Photographic characteristics has been compared the Insight system with the ortho KM/MG combination in $60{\sim}120kV$ range. Results 1. The particle size of backside film were investigated about 2 times larger that of front side film. 2. The front and backscreen's thickness ratio was detected 1 : 3.87, that the backscreen's thickness was thicker than frontscreen. 3. At the view point of photographic characteristics the frontside of insight system make up the contrast, backside make up the density at low exposure lesion.