• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.555-557
• /
• 1995

In near field optics, optical fiber probe is smaller than the wavelength of light. This small probe makes it possible to overcome the diffraction limit due to wave property of light. In conventional optical systems, the image resolution is governed by wavelength. But in NSOM, it is determined by probe tip size and probe shape. Therefore probe tip size and shape are very important points in near field optics. In this paper, we will suggest the new fabrication methods of optical fiber probe and show that the probe tip size is sub-micrometer using SEM.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.277.1-277.1
• /
• 2014

전도성 고분자인 PEDOT은 좋은 광학적 특성 및 유연성, 등의 장점으로 인해 TCO 박막으로의 응용을 위한 연구가 이루어 지고 있다. 하지만, 아직 까지는 높은 수준의 전도성 향상을 기대하기는 어려운 실정이며 전도성 향상에 대한 체계적 연구가 부족한 상황이다. 이에 본 연구에서는 다양한 알코올을 이용한 Dipping treatment를 활용하여 전도성의 변화에 대한 고찰을 하였으며, 열처리 과정을 통해 전도성이 어떻게 영향을 받는지에 대하여 연구하였다. 이를 위해 박막의 두께 및 cross-section을 FE-SEM을 이용하여 측정하였고, 각 각의 박막의 비저항은 4-poin probe를 활용하여 면저항을 구한다음 두께를 곱하는 방법으로 계산하였다. 동시에 열처리 및 Dipping을 한 박막의 PEDOT의 표면을 AFM image를 통해 확인하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.283-284
• /
• 2005

Al electrode for OLED was deposited by Facing Targets Sputtering(FTS) system which can reduce the damage of organic layer. The Al thin films were deposited on the slide glass as a function of working gas such as Ar, Kr or mixed gas. The film surface image was observed by AFM and SEM. In the results, when Al thin film were deposited using mixed gas, the surface morphology was improved in some region.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.05a
• /
• pp.129-132
• /
• 1996

Surface modification like cone formation on Pulsed laser deposition (PLD) occurs in YBCO target surface irradiated by laser beam. Cone formation results in a reduction of deposition rate, so that it is significant obstacles to an efficient deposition process. With the change of various conditions such as the number of laser shot, target density, direction of incoming laser beam, we have systematically analyzed the modification of target surface. Because cones formed by beam-target interactions grow in direction of incoming laser beam, we have used the method of rotating the target position by 180$^{\circ}$ with the same number and position of laser shot. Experimental results of losing the directionality and changing the shape of cones formed on laser irradiated YBCO target surface is obtained by the SEM image. Also, we have observed that the size of cones formed on target by pulsed laser became larger with increasing the number of laser shots.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.12
• /
• pp.42-47
• /
• 2003

The laser direct writing method has some advantages of being maskless, allowing rapid and inexpensive prototyping in comparison to conventional mask-based photolithography. In general, there are two kinds of laser direct writing methods such as the laser ablation method and the laser polymerization method. The laser polymerization method was studied fur manufacturing waveguide in this paper. It is important to reduce line width for image mode waveguides, so some investigations will be carried out in various conditions of process parameters such as laser power, writing speed, focusing height and optical properties of polymer. Experimentally, the optical waveguide was manufactured trapezoid shape. Through SEM the waveguide was 20 ${\mu}{\textrm}{m}$ width and 7.4 ${\mu}{\textrm}{m}$ height.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.83.2-83.2
• /
• 2011

In this study, we fabricated tubular ceramic support for segmented-in-series solid oxide fuel cell (SOFC) by using MAO(MgAl-stabilized ) as main material and activated carbon as pore former. Thermal expansion properties of ceramic support with different amounts of activated carbon were analyzed by using dilatometer to decide a suitable sintering temperature. The tubular ceramic supports with different amounts of activated carbon (15, 20, 30wt.%) were fabricated by the extrusion technique. After sintering at $1400^{\circ}C$ for 2h, cross section and surface morphology of tubular ceramic support were analyzed by using SEM image. Also, the porosity, mechanical property, gas permeability of tubular ceramic supports was measured. Based on these results, we established the suitable fabrication technique of tubular ceramic support for segmented-in-series SOFC.

• Proceedings of the KAIS Fall Conference
• /
• 2009.05a
• /
• pp.842-844
• /
• 2009

The major group which contains all the organisms that are commonly termed Dinoflagellates is called the division Pyrrophyta or Dinophyta in botanical systems and the order Dinoflagellida or Dinoflagellata in zoological systems. Most dinoflagellates are biflagellated solitary planktonic cells. A taxonomic survey of the dinoflagellate family, Triadiniaceae Dodge was conducted for plankton monitoring network in the coastal waters of Korea. Identification of species in water samples was usually done by using differential interference contrast (DIC), which revealed especially well lighted thecal structures. For the apparent three-dimensional image, scanning electron microscope (SEM) was used. Two species were identified and described, which were Triadinium orientale(Lindemann)Dodge and Triadinium sphaericum(Murray and Whitting)Dodge.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.278-279
• /
• 2015

CIGS 전구체는 각각 DC와 RF power로 셀레늄(Se)이 포함된 CuSe 타겟과 $(In,Ga)Se_2$ 타겟을 이용하여 스퍼터링 기법으로 증착한 후에 고속결정화 특성을 위해 전자빔을 조사하였다. 전자빔의 가속 전자의 강도(DC power)는 2.5~3.5keV로 조정하고 조사시간은 300초, RF power는 200W로 고정하였다. SEM image에서 전구체의 두께가 가속 전자의 강도에 따라 100~200nm의 손실됨을 확인할 수 있었다. XRD data 결과에서 3keV에서 조사된 샘플에서 가장 높은 (112) 피크의 특정 배양성을 보여 높은 결정화특성을 나타내었다. 조성비간의 변화를 보기 위해 XRF data 분석결과 전구체와 샘플간의 조성비의 차이는 그리 크지 않으나 I/III 족 비가 3 keV에서 가장 이상적인 비율이라 알려져 있는 1.0을 보였다.

• Journal of the Korean institute of surface engineering
• /
• v.44 no.5
• /
• pp.207-212
• /
• 2011

In this study, the change in diffusion coefficient and wear characteristic with depth in the carbonitriding layer of SCM415 steel was discussed. To determine the diffusion coefficient, depth profile of carbon was measured from the surface using the Glow Discharge Spectrometer. In otherwise, measurements of carbide fraction, micro vickers hardness of surface and observation of microstructure have been implemented through the SEM image. $Fe_3$(C,N) layer and effective depth were increased as the time for carbonitriding takes longer. According to wear experiment, the results showed that wear resistance was improved by $Fe_3$(C,N) layer and effective depth.

• Electrical & Electronic Materials
• /
• v.10 no.8
• /
• pp.794-799
• /
• 1997

Poly-Si films have been prepared by solid phase crystallization of LPCVD(low-pressure CVD) amorphous silicon. The crystallinity of poly-Si films has been derived from UV reflectance spectrum and lies in the range between 70% and 80% . From XRD measurement the peak at 28.2$^{\circ}$from (111) plane is dominantly detected in the SPC poly-Si films, The average grain size of poly-Si film is determined by the image of SEM and varies from 4000 $\AA$ to 8000$\AA$. The electrical conductivity of as-deposited amorphous silicon film is about 2.5$\times$10$^{-7}$ ($\Omega$.cm)$^{-1}$ , and 3~4$\times$10$^{-6}$ ($\Omega$.cm)$^{-1}$ of room temperature conductivity is the SPC poly-Si films. The conductivity activation energies are 0.5~0.6 eV or the 500$\AA$-thick poly-Si films.