• Steel and Composite Structures
• /
• v.34 no.5
• /
• pp.671-679
• /
• 2020

The new energy-based criterion, named Reinforcement Strain Energy Density (ReiSED), is proposed to investigate the fracture behavior of the cracked orthotropic materials in which the crack is embedded in the matrix along the fibers. ReiSED is an extension of the well-known minimum strain energy density criterion. The concept of the reinforced isotropic solid as an advantageous model is the basis of the proposed mixed-mode I/II criterion. This model introduces fibers as reinforcements of the isotropic matrix in orthotropic materials. The effects of fibers are qualified by defining reinforcement coefficients at tension and shear modes. These coefficients, called Reduced Stress (ReSt), provide the possibility of encompassing the fiber fraction in a fracture criterion for the first time. Comparing ReiSED fracture limit curve with experimental data proves the high efficiency of this criterion to predict the fracture behavior of orthotropic materials.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.270-273
• /
• 2006

In this study, ink-jet technology is applied to the emitter fabrication for surface-conduction electron-emitter display (SED). The general emiiter material of SED, palladium oxide (PdO), is prepared by calcination the mixture of solvent and precursors of platinum chlorine and platinum nitrate. With controlling the precursors and solvents, the PdO is formed below $400^{\circ}C$ which is required for SED process.

• Structural Engineering and Mechanics
• /
• v.50 no.6
• /
• pp.723-740
• /
• 2014

A fracture criterion based on the strain energy density (SED) over a control volume, which embraces the notch edge, is employed in the present paper to assess the fracture loads of some U-notched Brazilian disk (UNBD) specimens. The specimens are made of commercial graphite and have been tested under pure mode I, pure mode II and mixed mode I/II loading. The results show that the SED criterion allows to successfully assess the fracture loads of graphite specimens for different notch tip radii and various mode mixity conditions with discrepancies that fall inside the scatter band of ${\pm}20%$.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.105-110
• /
• 2010

Supersonic ejectors are simple mechanical components, which generally perform mixing and recompression of two fluid streams. Ejectors have found many applications in engineering. In aerospace engineering, they are used for high altitude testing (HAT) of a propulsion system by reducing the pressure of a test chamber. It is composed of three major sections: a vacuum test chamber, a propulsive nozzle, and a supersonic exhaust diffuser (SED). This paper aims at the improvement in HAT facility by focusing attention on the vertical firing rocket test stand with shock generators. Shock generators are mounted inside the SED for improving the pressure recovery. The results clearly showed that the performance of the ejector-diffuser system was improved with the addition of shock generators. The improvement comes in the form of reduction of the starting pressure ratio and the vertical height of test stand. It is also shown that shock generators are useful in reducing the total pressure loss in the SED.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.160-164
• /
• 2011

경기도 안산시 시화습지내에 위치한 하안 유도 시험장에 직선수로와 곡선수로를 시공하였다. 각각의 수로에 유도틀을 설치한 후 수리학적 특성을 분석하기 위해서 2차원 모형인 SMS를 이용하여 유량조건에 따른 유속 및 침식, 퇴적에 미치는 영향을 분석하고 예측하였다. SMS 모형 중 2차원 수리분석을 위한 RMA2 모형과 유사이송현황을 모의할 수 있는 SED2D 모형을 이용하여 하안유도 시험장에 적용하였으며 하안 유도 시험장은 크게 직선수로와 곡선수로로 구분하였다. 각각의 수로에 설치되는 유도틀은 ㄷ자형, ㄷㅂ자형, 직사각형, 마름모형이 있고, 총 10가지 경우로 하여 시험장 유도틀 형태별 2차원 수치모의를 분석하였다. 유속을 모의하기 위해 RMA2모형을 사용하였으며, 침식 및 퇴적을 모의하기 위해 SED2D모형을 사용하였다. 이러한 모의결과를 통해 실제 하천에서 유도틀 시공시 유량에 대한 하류 구간 대책을 수립하는 기초자료 활용하고자 한다.

• Journal of The Korean Astronomical Society
• /
• v.52 no.5
• /
• pp.173-180
• /
• 2019

We present IR flux density measurements, models of the broadband SED, and results of SED modeling for the Pulsar Wind Nebula (PWN) 3C 58. We find that the Herschel flux density seems to be slightly lower than suggested by interpolation of previous measurements in nearby wavebands, implying that there may be multiple electron populations in 3C 58. We model the SED using a simple stationary one-zone and a more realistic time-evolving multi-zone scenario. The latter includes variations of flow properties in the PWN (injected energy, magnetic field, and bulk speed), radiative energy losses, adiabatic expansion, and diffusion, similar to previous PWN models. From the modeling, we find that a PWN age of 2900-5400 yrs is preferred and that there may be excess emission at ${\sim}10^{11}Hz$. The latter may imply multiple populations of electrons in the PWN.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.200-203
• /
• 2011

Supersonic ejectors are simple mechanical components, which generally perform mixing and recompression of two fluid streams. Ejectors have found many applications in engineering. In aerospace engineering, they are used for high altitude testing (HAT) of a propulsion system by reducing the pressure of a test chamber. It is composed of three major sections: a vacuum test chamber, a propulsive nozzle, and a supersonic exhaust diffuser (SED). This paper aims at the improvement in HAT facility by focusing attention on the vertical firing rocket test stand with shock generators. Shock generators are mounted inside the SED for improving the pressure recovery. The results clearly showed that the performance of the ejector-diffuser system was improved with the addition of shock generators. The improvement comes in the form of reduction of the starting pressure ratio and the vertical height of test stand. It is also shown that shock generators are useful in reducing the total pressure loss in the SED.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.2
• /
• pp.55.1-55.1
• /
• 2019

We investigate broadband emission properties of the pulsar wind nebula (PWN) 3C 58 using a spectral energy distribution (SED) model. We attempt to match simultaneously the broadband SED and spatial variations and emission about 3C 58 in X-ray band. We further the model to explain a possible far-IR feature of which a hint is recently suggested in 3C 58: a small bump at ~10^11 GHz in the PLANCK and Herschel band. While external dust emission may easily explain the observed bump, it may be internal emission of PWNe implying an another additional population of particles. Although significance for the bump in 3C 58 is not higher than other PWNe, here we explore possible origins of the IR bump using the emission model and find that a population of electrons with GeV energies can explain the bump. If it is produced in the PWN, it may provide new insights into particle acceleration and flows in PWNe.

• Journal of Wetlands Research
• /
• v.19 no.4
• /
• pp.542-550
• /
• 2017

The estimations of flow characteristics and river-bed erosion or sedimentation are very important for hydraulic structure design, floodplain management, and especially, river management. The objective of the study is therefore to estimate the change of flow characteristics and river-bed change due to a hydraulic structure construction. With 11.65 km study area of the Geum River which are located in downstream of Daecheong Dam, flow characteristics and river-bed change were estimated based on the RMA2 and SED2D model. As the result of the study, the increase of river-bed sedimentation in upstream and river-bed erosion in downstream were occurred by the construction of hydraulic structure.

• Journal of Wetlands Research
• /
• v.14 no.4
• /
• pp.715-723
• /
• 2012

The Hoelyongpo in the Naeseong River as tributary basin of the Nakdong River is broadly well-known a tourist attraction, which is made of sandy beach, and is called "Island of Inland". But Construction of the Dam was planned at upstream of river. In other words, an influx of sediment is blocked from upstream of river. In this situation, through sediment discharge coming from tributary of the Naeseong river, the whether to go ahead of sand beach of the Hoelyongpo is analyzed by using 1-D and 2-D model. The sediment discharge is estimated through ratio raw with basin area, and the instream flow requirement of river coming from dam and the flow rate and sediment coming from tributary are inputted for model. The 1-D model uses HEC-6 and the 2-D model uses SMS(RMA2 and SED2D). The analysis using the HEC-6 is performed from cross section data 10 year ago to the present cross section. Consequently, Yang equation presenting similar result to the present cross section data is determined, using this, the prediction is conducted for the cross section after 20 years. The 2-D analysis is conducted for the present cross section data. The value of distinction between a deposition and erosion with the results presented in the 1, 2-D models is occur, however, the appearance between the deposition and the erosion is similar.