1 |
Torabi, A.R. and Jafarinezhad, M.R., (2012), "Comprehensive data for rapid calculation of notch stress intensity factors in U-notched Brazilian disc specimen under tensile-shear loading", Mater. Sci. Eng. A, 541, 135-142.
DOI
ScienceOn
|
2 |
Torabi, A.R., Fakoor, M. and Pirhadi, E. (2013a), "Tensile fracture in coarse-grained polycrystalline graphite weakened by a U-shaped notch", Eng. Fract. Mech., 111, 77-85.
DOI
ScienceOn
|
3 |
Torabi, A.R., Fakoor, M. and Darbani, M.A. (2013b), "Pure shear fracture study in a brittle graphite material containing a U-notch", Int. J. Damage Mech., DOI: 10.1177/1056789513514071.
DOI
ScienceOn
|
4 |
Torabi, A.R., Fakoor, M. and Pirhadi, E. (2013c), "Fracture analysis of U-notched disc-type graphite specimens under mixed mode loading", Int. J. Solids Struct., 51(6), 1287-1298.
|
5 |
Torabi, A.R. and Berto, F. (2013), "Strain energy density to assess mode II fracture in U-notched disk-type graphite plates", Int. J. Damage Mech., DOI: 10.1177/1056789513519349.
DOI
ScienceOn
|
6 |
Yamauchi, Y., Nakano, M., Kishida, K. and Okabe, T. (2001), "Measurement of mixed-mode fracture toughness for brittle materials using edge-notched half-disk specimen", Zairyo/J. Soc. Mater. Sci. Jap., 50, 224-229.
|
7 |
Yosibash, Z., Bussiba, A. and Gilad, I. (2004), "Failure criteria for brittle elastic materials", Int. J. Fract., 125, 307-333.
DOI
|
8 |
Radaj, D., Lazzarin, P. and Berto, F. (2013), "Generalised Neuber concept of fictitious notch rounding", Int. J. Fatigue, 51, 105-115.
DOI
ScienceOn
|
9 |
Neuber, H. (1958), Theory of notch stresses, Kerbspannungslehre, Springer-Verlag, Berlin, Germany.
|
10 |
Radaj, D., Berto, F. and Lazzarin, P. (2009a), "Local fatigue strength parameters for welded joints based on strain energy density with inclusion of small-size notches", Eng. Fract. Mech., 76, 1109-1130.
DOI
ScienceOn
|
11 |
Radaj, D., Lazzarin, P. and Berto, F. (2009b), "Fatigue assessment of welded joints under slit-parallel loading based on strain energy density or notch rounding", Int. J. Fatigue, 31, 1490-1504.
DOI
ScienceOn
|
12 |
Shi, L., Haiyan, L., Zhenmin, Z., Fok, A.S.L., Marsden, B.J., Hodgkins, A., Mummery, P.M. and Marrow, J. (2008), "Analysis of crack propagation in nuclear graphite using three-point bending of sandwiched specimens", J. Nucl. Mater., 372, 141-151.
DOI
ScienceOn
|
13 |
Sih, G.C. (1974), "Strain-energy-density factor applied to mixed mode crack problems", Int. J. Fract., 10, 305-321.
DOI
ScienceOn
|
14 |
Lazzarin, P., Berto, F., Gomez, F.J. and Zappalorto, M. (2008), "Some advantages derived from the use of the strain energy density over a control volume in fatigue strength assessments of welded joints", Int. J. Fatigue, 30, 1345-1357.
DOI
ScienceOn
|
15 |
Smith, D.J., Ayatollahi, M.R. and Pavier, M.J. (2001), "The role of T-stress in brittle fracture for linear elastic materials under mixed mode loading", Fat. Fract. Eng. Mater. Struct., 24(2), 137-150.
DOI
ScienceOn
|
16 |
Torabi, A.R. (2013a), "Fracture assessment of U-notched graphite plates under tension", Int. J. Fract., 181, 285-292.
DOI
ScienceOn
|
17 |
Torabi, A.R. (2013b), "Sudden fracture from U-notches in fine-grained isostatic graphite under mixed mode I/II loading", Int. J. Fract., 181, 309-316.
DOI
ScienceOn
|
18 |
Lazzarin, P. and Berto, F. (2005), "Some expressions for the strain energy in a finite volume surrounding the root of blunt V-notches", Int. J. Fract., 135, 161-185.
DOI
|
19 |
Lazzarin, P., Berto, F., Elices, M. and Gomez, F.J. (2009), "Brittle failures from U- and V-notches in mode I and mixed, I + II, mode: A synthesis based on the strain energy density averaged on finite-size volumes", Fat. Fract. Eng. Mater. Struct., 32(8), 671-684.
DOI
ScienceOn
|
20 |
Lazzarin, P., Berto, F. and Zappalorto, M. (2010), "Rapid calculations of notch stress intensity factors based on averaged strain energy density from coarse meshes: Theoretical bases and applications", Int. J. Fatigue, 32, 1559-1567.
DOI
ScienceOn
|
21 |
Lomakin, E.V., Zobnin, A.I. and Berezin, A.V. (1975), "Finding the fracture toughness characteristics of graphite materials in plane strain", Strength Mater., 7(4), 484-487.
DOI
|
22 |
Etter, T., Kuebler, J., Frey, T., Schulz, P., Loffler, J.F. and Uggowitzer, P.J. (2004), "Strength and fracture toughness of interpenetrating graphite/aluminum composites produced by the indirect squeeze casting process", Mater. Sci. Eng. A, 386, 61-67.
DOI
ScienceOn
|
23 |
Mostafavi, M. and Marrow, T.J. (2012), "Quantitative in situ study of short crack propagation in polygranular graphite by digital image correlation", Fat. Fract. Eng. Mater. Struct., 35, 695-707.
DOI
ScienceOn
|
24 |
Mostafavi, M., McDonald, S.A., C etinela, H., Mummery, P.M. and Marrow, T.J. (2013), "Flexural strength and defect behaviour of polygranular graphite under different states of stress", Carbon, 59, 325-336.
DOI
|
25 |
Gomez, F.J., Elices, M., Berto, F. and Lazzarin, P. (2007), "Local strain energy to assess the static failure of U-notches in plates under mixed mode loading", Int. J. Fract., 145, 29-45.
DOI
|
26 |
Glinka, G. (1985), "Energy density approach to calculation of inelastic strain stress near notches and cracks", Eng. Fract. Mech., 22(3), 485-508.
DOI
ScienceOn
|
27 |
Glinka, G., Shen, G. and Plumtree, A. (1995), "Multiaxial fatigue strain energy density parameter related to the critical fracture plane", Fat. Fract. Eng. Mater. Struct., 18(1), 37-46.
DOI
ScienceOn
|
28 |
Harding, S., Kotousov, A., Lazzarin, P. and Berto, F. (2010), "Transverse singular effects in V-shaped notches stressed in mode II", Int. J. Fract., 164, 1-14.
DOI
|
29 |
Jae, H.K., Young, S.L., Duck, H.K., No, S.P., Jeong, S.J., Kim, O. and Moon, S.I. (2004), "Evaluation of thermal shock strengths for graphite materials using a laser irradiation method", Mater. Sci. Eng. A, 387-389, 385-389.
DOI
ScienceOn
|
30 |
Kawakami, H. (1985), "Notch sensitivity of graphite materials for VHTR", J. Atom. Energy Soc. Jap., 27(4), 357-364.
DOI
|
31 |
Kotousov, A., Lazzarin, P., Berto, F. and Harding, S. (2010), "Effect of the thickness on elastic deformation and quasi-brittle fracture of plate components", Eng. Fract. Mech., 77, 1665-1681.
DOI
ScienceOn
|
32 |
Lazzarin, P., Berto, F. and Ayatollahi, M.R. (2013), "Brittle failure of inclined key-hole notches in isostatic graphite under in-plane mixed mode loading", Fat. Fract. Eng. Mater. Struct., 36(9), 942-955.
DOI
ScienceOn
|
33 |
Brighenti, R. (2008), "A new discontinuous FE formulation for crack path prediction in brittle solids", Int. J. Solids Struct., 45, 6501-6517.
DOI
ScienceOn
|
34 |
Berto, F., Lazzarin, P. and Gallo, P. (2013), "High-temperature fatigue strength of a copper cobalt-beryllium alloy", J. Strain Anal. Eng. Des., DOI: 10.1177/0309324713511804.
DOI
ScienceOn
|
35 |
Berto, F., Lazzarin, P., Harding, S. and Kotousov, A. (2012c), "Out-of-plane singular stress fields in Vnotched plates and welded lap joints induced by in-plane shear load conditions", Fat. Fract. Eng. Mater. Struct., 34, 291-304.
|
36 |
Brighenti, R. and Carpinteri, A. (2013a), "Surface cracks in fatigued structural components: A review", Fat. Fract. Eng. Mater. Struct., 36(12), 1209-1222.
DOI
ScienceOn
|
37 |
Bruno, A. and Latella, T.L. (2006), "The initiation and propagation of thermal shock cracks in graphite", Carbon, 44, 3043-3048.
DOI
ScienceOn
|
38 |
Carpinteri, A., Brighenti, R. and Vantadori, S. (2010a), "Influence of the cold-drawing process on fatigue crack growth of a V-notched round bar", Int. J. Fatigue, 32, 1136-1145.
DOI
ScienceOn
|
39 |
Carpinteri, A., Spagnoli, A. and Vantadori, S. (2010b), "A multifractal analysis of fatigue crack growth and its application to concrete", Eng. Fract. Mech., 77(6), 974-984.
DOI
ScienceOn
|
40 |
Carpinteri, A., Ronchei, C. and Vantadori, S. (2013), "Stress intensity factors and fatigue growth of surface cracks in notched shells and round bars: Two decades of research work", Fat. Fract. Eng. Mater. Struct., 36(11), 1164-1177.
DOI
ScienceOn
|
41 |
Berto, F. (2012), "Fictitious notch rounding concept applied to V-notches with end holes under mode 3 loading", Int. J. Fatigue, 38, 188-193.
DOI
ScienceOn
|
42 |
Berto, F. and Lazzarin, P. (2009), "A Review of the volume-based strain energy density approach applied to V-notches and welded structures", Theor. Appl. Fract. Mech., 52, 183-194.
DOI
ScienceOn
|
43 |
Berto, F. and Lazzarin, P. (2010), "Fictitious notch rounding approach of pointed V-notches under inplane shear", Theor. Appl. Fract. Mech., 53, 127-135
DOI
ScienceOn
|
44 |
Berto, F. and Zappalorto, M. (2011), "Fictitious notch rounding concept applied to V-notches with end holes under mode 1 loading", Int. J. Fract., 171, 91-98.
DOI
|
45 |
Berto, F. and Zappalorto, M. (2012), "The fictitious notch rounding approach applied to V-notches with root holes subjected to mode 1 loading", J. Strain. Anal., 47(3), 176-186.
DOI
|
46 |
Berto, F., Lazzarin, P. and Ayatollahi, M.R. (2012a), "Brittle fracture of sharp and blunt V-notches in isostatic graphite under torsion loading", Carbon, 50, 1942-1952.
DOI
ScienceOn
|
47 |
Ayatollahi, M.R. and Aliha, M.R.M. (2011), "On the use of anti-symmetric four-point bend specimen for mode II fracture experiments", Fat. Fract. Eng. Mater. Struct., 34, 898-907.
DOI
ScienceOn
|
48 |
Berto, F., Lazzarin, P. and Ayatollahi, M.R. (2013), "Brittle fracture of sharp and blunt V-notches in isostatic graphite under pure compression loading", Carbon, 63, 101-116.
DOI
ScienceOn
|
49 |
Berto, F. and Lazzarin, P. (2014), "Recent developments in brittle and quasi-brittle failure assessment of engineering materials by means of local approaches", Mater. Sci. Eng. R, 75, 1-48.
DOI
ScienceOn
|
50 |
Ayatollahi, M.R. and Pirmohammad, S. (2013), "Temperature effects on brittle fracture in cracked asphalt concretes", Struct. Eng. Mech., 45(1), 19-32.
DOI
ScienceOn
|
51 |
Ayatollahi, M.R., Berto, F. and Lazzarin, P. (2011a), "Mixed mode brittle fracture of sharp and blunt Vnotches in polycrystalline graphite", Carbon, 49, 2465-2474.
DOI
ScienceOn
|
52 |
Ayatollahi, M.R. and Torabi, A.R. (2011), "Failure assessment of notched polycrystalline graphite under tensile-shear loading", Mater. Sci. Eng. A, 528, 5685-5695.
DOI
ScienceOn
|
53 |
Ayatollahi, M.R. and Torabi, A.R. (2010a), "Tensile fracture in notched polycrystalline graphite specimens", Carbon, 48, 2255-2265.
DOI
ScienceOn
|
54 |
Ayatollahi, M.R. and Torabi, A.R. (2010b), "Determination of mode II fracture toughness for U-shaped notches using Brazilian disc specimen", Int. J. Solids Struct., 47, 454-465.
DOI
ScienceOn
|
55 |
Bazaj, D.K. and Cox, E.E. (1969), "Stress concentration factors and notch sensitivity of graphite", Carbon, 7(6), 689-697.
DOI
|
56 |
Ayatollahi, M.R. and Aliha, M.R.M. (2008), "Mixed mode fracture analysis of polycrystalline graphite-A modified MTS criterion", Carbon, 46, 1302-1308.
DOI
ScienceOn
|
57 |
Berto, F., Lazzarin, P. and Radaj, D. (2008), "Fictitious notch rounding concept applied to sharp V-notches: Evaluation of the microstructural support factor. Part I: Basic stress equations", Eng. Fract. Mech., 75, 3060-3072.
DOI
ScienceOn
|
58 |
Berto, F., Lazzarin, P. and Radaj, D. (2009), "Fictitious notch rounding concept applied to sharp V-notches: evaluation of the microstructural support factor for different failure hypotheses. Part II: Microstructural support analysis", Eng. Fract. Mech., 76, 1151-1175.
DOI
ScienceOn
|
59 |
Aliha, M.R.M., Heidari-Rarani, M., Shokrieh, M.M. and Ayatollahi, M.R. (2012), "Experimental determination of tensile strength and of polymer concretes using semi-circular bend (SCB) specimens", Struct. Eng. Mech., 43(6), 823-833.
DOI
ScienceOn
|
60 |
Ayatollahi, M.R. and Aliha, M.R.M. (2005), "Cracked Brazilian disc specimen subjected to mode II deformation", Eng. Fract. Mech., 72, 493-503.
DOI
ScienceOn
|
61 |
Ayatollahi, M.R. and Aliha, M.R.M. (2006), "On determination of mode II fracture toughness using semicircular bend specimen", Int. J. Solids Struct., 43, 5217-5227.
DOI
ScienceOn
|
62 |
Nakhodchi, S., Smith, D.J. and Flewitt, P.E.J. (2013), "The formation of fracture process zones in polygranular graphite as a precursor to fracture", J. Mater. Sci., 48, 720-732.
DOI
ScienceOn
|
63 |
Berto, F., Lazzarin, P., Kotousov, A. and Pook, L. (2012c), "Induced out-of-plane mode at the tip of blunt lateral notches and holes under in-plane shear loading", Fat. Fract. Eng. Mater. Struct., 35, 538-555.
DOI
ScienceOn
|
64 |
Ayatollahi, M.R., Aliha, M.R.M. and Saghafi, H. (2011b), "An improved semi-circular bend specimen for investigating mixed mode brittle fracture", Eng. Fract. Mech., 78, 110-123.
DOI
ScienceOn
|
65 |
Berto, F., Lazzarin, P. and Marangon, C. (2012b), "Brittle fracture of U-notched graphite plates under mixed mode loading", Mater. Des., 41, 421-432.
DOI
ScienceOn
|
66 |
Sato, S., Kawamata, K., Awaji, H., Osawa, M. and Manaka, M. (1981), "Thermal shock resistance and fracture toughness during the graphitization process", Carbon, 19, 111-118.
DOI
ScienceOn
|
67 |
Lazzarin, P. and Zambardi, R. (2001), "A finite-volume-energy based approach to predict the static and fatigue behavior of components with sharp V-shaped notches", Int. J. Fract., 112, 275-298.
DOI
ScienceOn
|