• The Journal of Industrial Distribution & Business
• /
• v.10 no.1
• /
• pp.9-17
• /
• 2019

Purpose - Urban agglomeration construction is one of national strategic plans to accelerate the development of industrialization and urbanization in China, which has threatened the eco-environmental quality at the same time. This paper selected the urban agglomeration in the middle reaches of the Yangtze River as the research area. Research design, data, and methodology - The the slack-based measurement (SBM) model considering undesirable outputs is applied to measure the eco-efficiency of this urban agglomerations during 2006-2015. Results - The empirical results show that average eco-efficiency of the urban agglomeration in the middle reaches of the Yangtze River is 0.595. Regional ecological development is unbalanced. The highest eco-efficiency is recorded at Wuhan Metropolitan Area, and the lowest one is at the Changsha-Zhuzhou-Xiangtan City Group. Energy consumption and waste dust emissions are the key factors led to ecological inefficiency. Based on this, potentials for energy saving and waste dust reducing are calculated. Conclusions - Finally, this study provides policy implications targeted to promote the coordinating development of economy and eco-environment under the construction of urban agglomeration.

• The Journal of Industrial Distribution & Business
• /
• v.8 no.7
• /
• pp.13-20
• /
• 2017

Purpose - Performance appraisal has a significant influence on the development of low-carbon tourism distribution. Research design, data, and methodology - Data of this study are collected from 27 provinces (cities) of China. SBM-Malmquist model is used to measure the TFP and its dynamic changes of low-carbon tourism distribution; TOBIT model is used to discuss the factors of TFP of low-carbon tourism distribution. Results - The results show that, there are obvious differences among regional TFP of low-carbon tourism distribution, the average change tends to grow positively in general, and the western region grows fastest on average due to the improvement of technical efficiency and technical progress, while there are technical efficiency improvement but technical regresses in eastern and central regions. The economic scale, economic strength, structure of energy consumption, location quotient and government regulation have a significant positive effect on the TFP of low-carbon tourism; energy intensity, industrial structure and opening degree have a negative effect; investments in fixed assets, intensity of R&D fund and urbanization rate have no significant influence on the TFP of low-carbon tourism. Conclusions - Improving the productivity of low-carbon tourism and reducing regional differences are effective ways to develop low-carbon tourism and enhance tourism competitiveness.

• Asian Journal of Business Environment
• /
• v.8 no.2
• /
• pp.15-22
• /
• 2018

Purpose - It is important to figure out the relationship between tourism carbon emissions and tourism economics for a healthy tourism development. Research design, data, and methodology - Data of this study are collected from 27 provinces (cities) of China. Tourist consumption stripping coefficient is used to calculate tourism carbon emissions. SBM-Undesirable model is used to measure the efficiency of tourism economics under the constraint of tourism carbon emissions. Results - The results show that: during the year of 2005-2015, there are obvious differences in totals and intensities of tourism carbon emissions among 27 provinces and cities which can be divided into three areas. There is a high possibility of underestimating the actual efficiency of tourism economics by leaving tourism carbon emissions out of account, and a high inefficiency caused by tourism carbon emissions will lead a low efficiency of tourism economics. Conclusions - The development of tourism should give consideration to both economic and environmental benefits, and reduce the inefficiency caused by tourism carbon emissions to improve efficiency of tourism economics by improving the level of technical efficiency and promoting technological progress.

• ETRI Journal
• /
• v.35 no.6
• /
• pp.1152-1155
• /
• 2013

A cost-effective and simple solder on pad (SoP) process is proposed for a fine-pitch microbump interconnection. A novel solder bump maker (SBM) material is applied to form a 60-${\mu}m$ pitch SoP. SBM, which is composed of ternary Sn3.0Ag0.5Cu (SAC305) solder powder and a polymer resin, is a paste material used to perform a fine-pitch SoP through a screen printing method. By optimizing the volumetric ratio of the resin, deoxidizing agent, and SAC305 solder powder, the oxide layers on the solder powder and Cu pads are successfully removed during the bumping process without additional treatment or equipment. Test vehicles with a daisy chain pattern are fabricated to develop the fine-pitch SoP process and evaluate the fine-pitch interconnection. The fabricated Si chip has 6,724 bumps with a 45-${\mu}m$ diameter and 60-${\mu}m$ pitch. The chip is flip chip bonded with a Si substrate using an underfill material with fluxing features. Using the fluxing underfill material is advantageous since it eliminates the flux cleaning process and capillary flow process of the underfill. The optimized bonding process is validated through an electrical characterization of the daisy chain pattern. This work is the first report on a successful operation of a fine-pitch SoP and microbump interconnection using a screen printing process.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.49 no.2
• /
• pp.146-153
• /
• 2016

A feeding experiment was conducted to determine the nutritional value of various dietary protein sources without a vitamin premix supplementation in juvenile black rockfish, Sebastes schlegeli. Diets containing similar quantities of lipid and carbohydrate with 50% crude protein from fish meal (FM)/soybean meal (SBM)/corn gluten meal (CGM), FM only, casein/gelatin, high FM/low casein and low FM/high casein were fed to rockfish along with a commercial rockfish diet. The diet containing only 65.6% FM and the commercial rockfish diet produced significantly greater weight gain (WG) and feed efficiency (FE) than all other semipurified diets (SPDs); the economical diet with 52.8% FM, 10% SBM and 5% CGM produced lower WG than the diet containing FM and commercial rockfish diet, but FE and survival were similar both diets. Intermediate responses were observed for rockfish fed the SPD containing 32.8% FM and 27.4% casein, while SPDs containing 10% FM and 41.8% casein and 38.5% casein and 10% gelatin yielded the lowest WG and FE. Some differences in tissue indices and body composition of rockfish were induced by the diets containing various protein sources and levels without the vitamin premix supplementation.

• Asian-Australasian Journal of Animal Sciences
• /
• v.6 no.2
• /
• pp.253-258
• /
• 1993

The study on the nutritive value and the potential use of two kinds (local vs. import) of sesame meal (SSM) in layer diets as substitute for soybean meal (SBM) at 25, 50, and 75% was carried out. Three hundred and thirty six layers were kept individually on a battery cage and fed isonitrogenous diets, 16% crude protein (CP), for 252 days. The local and the imported SSM contained on air dry basis 35.7 and 36.3% CP, 24.7 and 9.1% ether extract (EE), respectively. Their amino acid contents are all lower than those reported by NRC (1984). The local material contained remarkably lower lysine (0.44 vs. 0.94), methionine + cystine (1.06 vs. 1.75) and threonine (0.52 vs. 1.22) than the imported meal. Imported SSM could be substituted for SBM as high as 50% in layer ration without statistically adverse effect on egg production, feed intake, body weight gain, average egg weight and egg size, while local SSM was inferior to the control in all aspects. However, when production performance of the groups fed either kind of SSM was compared, no significant difference was found at the two lower substitution levels.

• Korean Journal of Poultry Science
• /
• v.47 no.3
• /
• pp.135-142
• /
• 2020

The objective of this experiment was to determine the apparent (AID) and standardized ileal digestibility (SID) of crude protein (CP) and amino acids (AA) in five feed ingredients for male broiler chickens (Ross 308). The test feed ingredients consisted of corn, wheat, soybean meal (SBM), canola meal (CM), and corn distillers dried grains with solubles (DDGS). The birds were fed a standard starter diet for the first 19 d. On day 19, nine hundred sixty birds were assigned to six dietary treatments with eight replicate cages (20 birds/cage) in a randomized complete block design. All experimental diets contained chromic oxide (0.5% in the diet) as an indigestible index. The diets were offered ad libitum for 4 d. At the end of the experiment, all birds were euthanized and ileal digesta samples were collected immediately. The indispensable AA with the least AID and SID were Thr for all the ingredients used in the present study, except for DDGS, in which Lys had the lowest digestibility. For indispensable AA, the AID and SID of Leu, Phe, Arg, and Met were the greatest in corn, DDGS, wheat, SBM, and CM, respectively. The results from the present study showed that there are variations in both the AID and SID of CP and AA among feed ingredients.

• Nuclear Engineering and Technology
• /
• v.32 no.3
• /
• pp.244-253
• /
• 2000

A Simple Large Model (SLM), which can be used to make thermal calculation for a deep geological repository with finite number of HLW canisters, was developed. In order to develop the SLM, a Simple Basic Model (SBM), which will be a unit of the SLM, was optimized first. The SBM was optimized to achieve the same maximum buffer temperature as that of the Detailed Basic Model (DBM) representing the real geometric aspects of the repository. In contrast to the models with the assumption of infinite number of canisters which cannot consider boundary effect, the SLM can model the real repository with finite number of canisters and thus consider the boundary effect. Thermal results from the SLM can be used to evaluate the reliability of the models, which do not consider boundary effect. This model can also be used to simulate the thermal layout design and to analyze the thermal safety of a deep geological repository as well as an underground laboratory.

• Plant Resources
• /
• v.7 no.1
• /
• pp.39-46
• /
• 2004

To demonstrate the importance of transformation efficiency in independent event, molecular and cytogenetic analysis were conducted with genomic DNA and chromosome of transgenic plants produced by Agrobacterium tumefeciens LBA4404 (pSBM-PPGN: gusA and bar). Selection ratios of putative transgenic calli were similar in independent experiments, however, transformation efficiencies were critically influenced by the type of regeneration media. MSRK5SS-Pr regeneration mediun, which contains 5 mgL$^{-1}$ kinetin, 2% (w/v) sucrose in combination with 3% (w/v) sorbitol, and 500 mgL$^{-1}$ proline, was efficient to produce transgenic plant of rice from putative transgenic callus in the presence of L-phosphinotricin (PPT). With MSRK5SS-Pr medium, transformation efficincies of Nagdongbyeo were significantly enhanced from 3.7% to 6.3% in independent callus lines arid from 7.3% to 19.7% in plants produced, respectively. Stable integration and expression of bar gene were confirmed by basta herbicide assay, PCR amplification and Southern blotting of bar gene, and fluorescence in situ hybridization (FISH) analysis using pSBM-PPGN as a probe. In Southern blot analysis, diverse band patterns were observed in total 44 transgenic plants regenerated from 20 independent PPT resistant calli showing from one to five copies of T-DNA segments, however, the transformants obtained from one callus line showed the same copy numbers with the same fractionized band patterns.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.3
• /
• pp.430-440
• /
• 2022

Shipping companies are key components of the logistics industry, which is extremely significant in enhancing the country's comprehensive national power and promoting global trade development. In the context of the implementation of the new development pattern strategy in China and the impact of the global novel coronavirus (COVID-19), this paper takes 22 Chinese shipping listed companies as the research object and analyses the operational efficiency of them from 2011 to 2020 based on the Super-SBM DEA Model and Window DEA Model. Factors affecting the efficiency are further analyzed with the Tobit model. The research conclude that the operational efficiency of Chinese shipping companies as a whole shows a steady increase from 2011 to 2020. Although most of them are in a relatively ef ective operation state, fewer are absolutely effective companies. Besides efficiency among companies differs obviously, which indicates the potential of further improvement and promotion. What's more, factors such as current economic development level, enterprise size, human resources quality and enterprise turnover speed have significant positive correlation to the operation efficiency of Chinese shipping listed companies, which is significant to improve the operation efficiency of Chinese shipping companies.