• 제목/요약/키워드: SBC

검색결과 158건 처리시간 0.044초

LN2440SBC 임베디드 시스템을 위한 TFT LCD 초기화 및 그래픽스 라이브러리 함수 구현 (The Initialization of a TFT LCD and Implementation of Library Functions for an LN2440SBC Embedded System)

  • 김병국;박근덕;오삼권
    • 한국정보처리학회:학술대회논문집
    • /
    • 한국정보처리학회 2009년도 춘계학술발표대회
    • /
    • pp.639-642
    • /
    • 2009
  • LN2440SBC 임베디드 보드는 ARM 코어 방식의 S3C2440A CPU를 가진 임베디드 컴퓨터 시스템이다. 이 시스템에 부착한 터치스크린 기능을 가진 TFT LCD 키트인 LP35의 구동을 위해서는 ARM 코어, LCD 컨트롤러, 그리고 LCD 장치와의 통신을 위한 SPI(serial peripheral interface)의 초기화와 LCD 화면에 이미지, 선, 도형 같은 것들의 출력을 가능하게 해주는 그래픽스 라이브러리 함수들이 필요하다. 본 논문은 이같은 기능들을 가지는 LP35를 위한 드라이버의 구현 방법을 기술한다. 특히, 드라이버 구동을 위한 초기화 방법과 화면 출력 기능들의 구현을 위해 필요한 픽셀 디스플레이 함수의 구현에 중점을 두어 설명한다. 또한 픽셀 디스플레이 함수를 이용한 기본 그래픽스 라이브러리 함수들에 대해 설명한다. 드라이버의 초기화를 위해서는 클럭 속도 설정, 범용 입출력 핀(GPIO)을 LCD와 SPI 용으로의 할당. SPI의 마스터/슬레이브 및 보오 레이트 설정, LCD 컨트롤러 레지스터 설정을 통한 LCD 기능 선택. 그리고 SPI를 통한 LCD 장치로의 파워 온(power on) 명령 전달 등이 수행된다.

LN2440SBC 시스템을 위한 한글 포팅 및 출력 방식 비교 (Hangul Porting and Display Method Comparison for an LN2440SBC System)

  • 김병국;박근덕;오삼권
    • 한국정보처리학회:학술대회논문집
    • /
    • 한국정보처리학회 2009년도 춘계학술발표대회
    • /
    • pp.635-638
    • /
    • 2009
  • 컴퓨터 디스플레이를 위한 한글 표현 방법에는 한글 음절의 초성, 중성, 종성 각각에 코드를 부여하고, 이를 조합하여 1 음절을 2 바이트로 처리하는 표준 조합형 코드와 각 음절마다 2 바이트 코드를 부여하는 표준 완성형 코드, 그리고 모든 국가의 언어를 표현하기 위한 만국 공통의 문자부호 체계인 유니코드 방식이 있다. 일반적으로 임베디드 시스템은 PC에 비해 상대적으로 속도가 느리고 저장공간 또한 제한되어 있으나 그 용도에 따라 PC에 필적하는 성능을 가지는 경우도 있다. 따라서 화면에 한글을 출력할 경우, 임베디드 시스템의 자원 환경에 맞는 적합한 방식을 채택해야 한다. 본 논문은 시랩시스(CLabSys)사의 3.5" TFT LCD 키트인 LP35가 부착된 LN2440SBC 임베디드 보드(S3C2440A CPU, 400MHz)의 TFT LCD 드라이버 제작을 위한 초기화 방법과 픽셀 디스플레이 함수를 소개한다. 또한 픽셀 디스플레이 함수와 비트맵 폰트를 사용하여 표준 조합형, 표준 완성형, 유니코드 방식의 3가지 방식에 대한 한글 출력 처리 속도와 필요 메모리 용량을 비교한다. 시험 결과에 따르면, 표준 조합형은 적은 메모리 공간을 차지하지만 초성, 중성, 종성을 조합하는데 시간이 소요되고, 완성형은 조합형에 비해 출력 처리 속도는 빠르나 모든 음절의 저장을 위해 비트맵 폰트의 용량이 크며, 유니코드는 비트맵 폰트의 용량은 가장 크지만, 국가 간 언어의 호환성을 보장하고 출력 속도 또한 세 가지 방식 중 가장 빠른 것으로 나타났다.

키위와 무를 첨가한 소립 검정콩 청국장의 정미성분 (Taste Compounds of Small Black Bean Chungkugjang Added with Kiwi and Radish)

  • 손미예;권선화;서권일;박석규;박정로
    • 생명과학회지
    • /
    • 제11권6호
    • /
    • pp.517-522
    • /
    • 2001
  • 소립검정콩 청국장의 품질개선관 불쾌취 억압을 목적으로 키위와 무를 첨가하여 42$^{\circ}C$에서 3일간 발효시킨 소립 검정콩 청국장의 몇 가지 맛성분을 조사하였다. 소립 검정콩 청국장의 황색대두 청국장보다 유리아미노산 함량이 적었지만, 키위와 무를 첨가하여 발효시키면 유리아미노산의 함량이 증가되어 콩단백질 분해에 효과적이었다. 유기산은 모든 청국장에서 citric acid가 가장 많았으며, 다음올 acetic acid, lactic acid 순으로 많았다. 지방산은 linoleic acid (50.82~54.51%)> oleic acid(17.76~22.10%)> plamitic acid(12.13~13.79%) 순으로 많았다. 청국장의 종류별로 유기산과지방산 비율은 유의적인 차이가 없었다. 청국장의 주요 휘발성 성분으로는 indole, 2,5-dimethyl pyrazine 및 tri-methyl pyrazine 였으며, 청국장의 독특한 향미성분의 pyra-zine 류는 대두 청국장보다 키위와 무를 넣은 소립 검정콩 청국장에서 약 3배 정도 감소하였다. 주요 핵산관련 물질은 uracil과 UMP였으며, 다른것은 그 함량에 유사한 경향이었다.

  • PDF

다결정 실리콘 Self-align에 의한 바이폴라 트랜지스터의 제작

  • 채상훈;구진근;김재련;이진효
    • ETRI Journal
    • /
    • 제7권4호
    • /
    • pp.11-14
    • /
    • 1985
  • 바이폴라 소자로 구성된 회로가 양호한 특성을 갖기 위해서는 개별 소자의 동작 속도, 집적도 및 전력 소비 특성이 좋아야 한다. 그런데 지금까지 주로 사용해온 기존의 SBC 바이폴라 트랜지스터로는 이들 특성을 개선하는 데는 한계가 있었다. 일반적으로 바이폴라 트랜지스터는 면적이 줄어듦에 따라 이들 특성이 개선되므로 본 연구에서는 SBC 방법과는 다른 PSA 공정 방법을 개발하였다. 즉, 소자 격리에서의 종래의 PN 접합에 의한 방법과 다른 산화막에 의한 방법을 도입하였고 또한 에미터, 베이스 사이의 거리를 최소로 줄이기 위하여 다결정 실리콘에 의한 polysilicon self-align 방법으로 에미터 및 베이스를 형성시켰다.

  • PDF

Calibration transfer between miniature NIR spectrometers used in the assessment of intact peach and melon soluble solids content

  • Greensill, Colin.V.;Walsh, Kerry.B.
    • 한국근적외분광분석학회:학술대회논문집
    • /
    • 한국근적외분광분석학회 2001년도 NIR-2001
    • /
    • pp.1127-1127
    • /
    • 2001
  • The transfer of predictive models using various chemometric techniques has been reported for FTNIR and scanning-grating based NIR instruments with respect relatively dry samples (<10% water). Some of the currently used transfer techniques include slope and bias correction (SBC), direct standardization (DS), piecewise direct standardization (PDS), orthogonal signal correction (OSC), finite impulse transform (FIR) and wavelet transform (WT) and application of neural networks. In a previous study (Greensill et at., 2001) on calibration transfer for wet samples (intact melons) across silicon diode array instrumentation, we reported on the performance of various techniques (SBC, DS, PDS, double window PDS (DWPDS), OSC, FIR, WT, a simple photometric response correction and wavelength interpolative method and a model updating method) in terms of RMSEP and Fearns criterion for comparison of RMSEP. In the current study, we compare these melon transfer results to a similar study employing pairs of spectrometers for non-invasive prediction of soluble solid content of peaches.

  • PDF

APDE(Antenna Positioning Drive Electronics) Design for MSC (Multi-Spectral Camera)

  • Kong Jong-Pil;Heo Haeng-Pal;Kim YoungSun;Park Jong-Euk;Youn Heong-Sik
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
    • /
    • pp.440-443
    • /
    • 2004
  • As a main management unit of MSC, PMU controls the MSC payload operation by issuing commands to other subunit and PMU internal modules. One of these main control functions is to drive the APS(Antenna Pointing System) when APS motion is required. For this purpose, SBC(Single Board Computer) for calculating motor commands and APDE for driving APM(Antenna Pointing Mechanism) by PWM signal operate inside PUM. In this paper, details on APDE design shall be described such as electronic board architecture, primary and redundant design concept, Cross-Strap, FPGA contents and latch-up immune concept, etc., which shall show good practices of electronic board design for space program.

  • PDF

인간의 시각특성을 고려한 Sub-Band 부호화에서 MRF 비교에 관한 연구 (On the Comparison of MTF in Sub-Band Coding Technique Employing the Human Visual System)

  • 김용관;박섭형;이상욱
    • 대한전자공학회논문지
    • /
    • 제27권5호
    • /
    • pp.784-792
    • /
    • 1990
  • In this paper, attempts have been made to compare the subjective performance of sub-band coding (SBC) techniques incorporating four representative modulation transfer functions (MTF's) of th human visual system(HVS): Sakrison, Nill, Ngan, and Rao. In SBC, the frequency band of input signal is split into 16 equal sub-bands. In addition, 28 sub-band splitting schemd which splits more sub-bands in low spatial frequency is considered to compare the 4 MTF's effectively. In encoding of each sub-band, the weight of each sub-band obtained from the MTF of HVS is applied to bit allocation process which minimize the weighted mean square error (WMSE). The differential pulse code modulation(DPCM) coder is used to encode the lowest sub-band and the pulse code modulation(PCM) coder is used for the rest of sub-bands. It is found that the images incorporating the MTF of Rao yields the best results in subjective criteria, followed by Ngan, Nill, Sakrison, and the images not employing the HVS.

  • PDF

VRT 서-보 위상제어용 집적회로의 설계 및 제작 (Design and Fabrication of VTR Servo Phase Control IC)

  • 배정렬;오창준
    • 대한전자공학회논문지
    • /
    • 제22권4호
    • /
    • pp.44-50
    • /
    • 1985
  • 본 논문은 YTR servo계의 위상을 제어하는 위상제어용 집적회로의 설계및 제작에 대하여 기술한다. 6μm 설계법칙을 적용하여 설계하였으며 ?의 크기는 3.6×3.55mm²이다. SBC공정, analog-compatible I2L공정및 이중금속배선공정을 이용하여 집적회로를 제작하였다. 그 결과 D.C특성및 위상제어기능이 만족스러운 직접회로의 제작에 성공하였다.

  • PDF

SBC와 블럭 적응 양자화를 이용한 가정용 디지탈 VCR 영상 압축 알고리듬 (An Image Data Compression Algorithm for a Home-Use Digital VCR Using SBC with Block-Adaptive Quantization)

  • 김주희;서정태;박용철;이제형;윤대희
    • 전자공학회논문지B
    • /
    • 제31B권9호
    • /
    • pp.124-132
    • /
    • 1994
  • An image data compression method for a digital VCR must satisfy special requirements such as high speed playback. various edting capabilities and error concealment to provide immunity to tape dropouts. Taking these requirements requirements into consideration, this paper proposes a new interframe subband coding algorithm for a digital VCR. In the proposed method, continuous input images are fist partitioned into four frequency bands. The lowest frequency subband is coded with 3-D block adaptive quantization that removes the level redundancy within each level. The other higher frequency subbands are coded by an intraframe coding method using the property of the human visual system. To keep reasonable image quality in high speed palyback, a segment forming method in the frequency domaing is also proposed Computer simulation results demonstrate that the proposed algorithm has the potential of achieving virtually lossless compression in normal play and produces an image with less mosaic errors in high speed play.

  • PDF

PREPARATION OF CARBON DIOXIDE ABSORPTION MAP USING KOMPSAT-2 IMAGERY

  • Kim, So-Ra;Lee, Woo-Kyun
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
    • /
    • pp.200-203
    • /
    • 2008
  • The objective of this study is to produce the $CO_2$ (carbon dioxide) absorption map using KOMPSAT-2 imagery. For estimating the amount of $CO_2$ absorption, the stand biomass of forest was estimated with the total weight, which was the sum of individual tree weight. Individual tree volumes could be estimated by the crown width extracted from KOMPSAT-2 imagery. In particular, the carbon conversion index and the ratio of the $CO_2$ molecular weight to the C atomic weight, reported in the IPCC (Intergovernmental Panel on Climate Change) guideline, was used to convert the stand biomass into the amount of $CO_2$ absorption. Thereafter, the KOMPSAT-2 imagery was classified with the SBC (segment based classification) method in order to quantify $CO_2$ absorption by tree species. As a result, the map of $CO_2$ absorption was produced and the amount of $CO_2$ absorption was estimated by tree species.

  • PDF