• Computers and Concrete
• /
• v.26 no.5
• /
• pp.451-465
• /
• 2020

This paper presents experimental and numerical investigations on mechanical properties of ultra-high-performance fiber-reinforced concrete (UHPFRC) with four types of steel fibers; micro steel (MS), crimped (C), round crimped (RC) and hooked-end (H), in two fiber contents of 1% and 2% (by volume) and two lengths of 13 and 30 mm. Compression, direct tension, and four-point bending tests were carried out on four types of specimens (prism, cube, dog-bone and cylinder), to study tensile and flexural strength, fracture energy and modulus of elasticity. Results were compared with UHPC specimens without fibers, as well as with available equations for the modulus of elasticity. Specimens with MS fibers had the best performance for all mechanical properties. Among macro fibers, RC had better overall performance than H and C fibers. Increased fibers improved all mechanical properties of UHPFRC, except for modulus of elasticity, which saw a negligible effect (mostly less than 10%). Moreover, nonlinear finite element simulations successfully captured flexural response of UHPFRC prisms. Finally, nonlinear regression models provided reasonably well predictions of flexural load-deflection behavior of tested specimens (coefficient of correlation, R² over 0.90).

• Journal of the Korean institute of surface engineering
• /
• v.28 no.6
• /
• pp.386-392
• /
• 1995

The RF planar magnetron sputtering technique was used to fabricate uniform ZnO/$SiO_2$/Si thin films at high growth rate. A detailed crystallographic character of these thin films has been carried oct using XRD, XRC, and SEM. These thin films have the configuration of c-axis orientation perpendicular to $SiO_2$/ Si substrate. The dependence of the thickness of ZnO/$SiO_2$/Si films on applied RF power parameters was also investigated. The crystallinity of films was improved as the substrate temperature was high, RF input power increased, and Ar/$O_2$ ratio decreased. Also, most of ZnO films fabricated on $SiO_2$/Si were suitable for SAW filter since a standard deviation of XRC (002) peak was less than $6^{\circ}$. The presence of the $SiO_2$ layer has a beneficial effect on the crystalline quality of the grown ZnO films.

• The Korean Journal of Rehabilitation Nursing
• /
• v.13 no.1
• /
• pp.53-61
• /
• 2010

Purpose: The purpose of this study was to investigate the relationships of social networks to health status among the urban low income elderly. Method: Using a sample of 598 elderly aged 65 years and higher, social networks, health status were measured by the Social Networks Scale (LSNS), Perceived Health Status, GDSSF-K, K-ADL respectively. The t-test, ANOVA and Tukey-test and Pearson's correlation analyses were performed using SPSS 18.0. Results: 41% of subjects didn't contact with relatives at least once a month. 56% of subjects saw or heard less than monthly from relative with whom they have the most contact. 47% didn't have relatives who one can rely on private matters. Social networks among the low income elderly significantly differed by marital status, health insurance type, economic status, regular exercise, living with family. Social networks were significantly correlated with perceived health status (r=.201), cognitive function (r=-.154) and depressive symptoms (r=-.301). Conclusion: Poor social networks were found in urban low income elderly. Poorer social networks were related to worse health status and more depressive symptoms. Interventions targeting at increasing social networks are urgently needed for low income elderly.

• Journal of Environmental Health Sciences
• /
• v.19 no.4
• /
• pp.38-43
• /
• 1993

The characteristics of food wastewater treatment in an anaerobic packed bed reactor (APBR) with polyurethane as a packing material and sludge bed reactor (ASBR) was studied. The reactor of 9cm-ID, 150cm-height was fed in a continuous mode from bottom of reactor. For the purpose of constant temperature of reactor, water jacket was installed. The used packing materials was polyurethane sponge foam. Methane which was produced by decomposed organics collected at the top of the reactor for using as a fuel. The substrates used were synthetic, mixed and food wastewater. For the acclimatization of microorganisms, mixed wastewater was used. The major analyses were gas production, COD, pH and volatile acids. Based upon the completed works, the results are as follows: When food wastewater was fed the quantity of produced gas was less than that of synthetic wastewater, but food process saw higher methane content than synthetic process. As well as COD removal efficiency of food process reached at about 85%. In aspect of effluent volatile acid, food process showed low concentration of below 500 mg/l, therefore anaerobic reaction stabled. Conclusively food wastewater used can be digested by anaerobic treatment, especially anaerobic packed bed reactor showed 82% of COD removal, 75% of methane content, 10 l of gas production, and anaerobic sludge bed reactor did 79% of COD removal, 75% of methane content, 81 of gas production at 4 kgCOD/m$^3$day, 36$\circ$C.

• Laser Solutions
• /
• v.11 no.2
• /
• pp.8-14
• /
• 2008

Sintered specimen which used for a blade of diamond tool was manufactured in order to verify $CO_2$ laser weldability depend on sintered temperature. Five kind of specimen were prepared and the range of temperature is from $600^{\circ}C$ to $1000^{\circ}C$ at intervals of $100^{\circ}C$. As a result of the sintered density test, the porosity rate appeared in the range of $2.1%{\sim}21.4%$. After welding, the most segments had exceeds the minimum fracture stress (600MPa, The Standard Safety of Europe) at the welding strength test except on the sintered at $600^{\circ}C$. In case of the sintered at $700^{\circ}C$, even satisfied the safety allowable stress but cannot get the good quality for bead appearance because of humping defect. In the conclusion, we could know that it showed not only relatively soundness bead but also enough welding strength when the sintered blade of diamond tool is included less than 4% of porosity rate.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.3 no.4
• /
• pp.233-239
• /
• 2002

The technology of joining BT (Biotechnology) with NT (Nanotechnology) must be rapidly arranged in 21c. Specially, the technical value is important more and more since the research about MEMS, which synthesizes BT and NT, is variously proceeding on the wide fields. This study by simulation shows the Fluid-Flow within micro Pump used in Bio-MEMS technology through Fluent Program. Namely, this experiment shows the most suitable external conditions and Pump Model within micro Pump by observing the flow of fluids as to the conditions of pressure, temperature and Model when the Fluid flows within micro Pump. We saw the variousness of pressure and temperature as to the existence of Chamber through examining by reference of Fluid-Flow. In the case of the existence of Chamber, the variousness of pressure and temperature is less than in the case of the non-existence of Chamber. By this simulation, we know that the Pump, which has a Chamber, affects the Fluid-Flow less than that. So we can say that it is necessary for us to design the Pump which has a Chamber.

• Restorative Dentistry and Endodontics
• /
• v.18 no.1
• /
• pp.205-213
• /
• 1993

The purpose of the study was to evaluate the degree of the marginal leakage of esthetic restorative materials on root caries restoration. 120 cavities were prepared to $90^{\circ}$ butt joint on all margins on the crown and root portion, and divided into 4 groups. The four groups of cavity were filled with Amalgam(Dongmuyung Dental Alloy Co., Ltd, KOREA), Silux$^{(R)}$(3M Co., USA)-Scotch Bond 2$^{(R)}$(3M Co., USA), Silux$^{(R)}$-All Bond$^{(R)}$(BISCO USA), and GC Fuji II$^{(R)}$(G-C Co., JAPAN) respectively. The apical margin of the preparation was finished to leave a flash of restorative material. The coronal margin of the preparation was finished not to leave a flash of restorative material. All specimens were sectioned longitudinally with Isomet Low speed saw(Buether Ltd, USA). The degree of dye penetration was evaluated as the parameter of marginal leakage under the stereoscope. The results were as follows. 1. At the enamel and dentin/cementum margins, the margin were finished to leave a flash of material showed less marginal leakage than that were finished not to leave a flash of material (P<0.001). 2. The enamel margins showed less marginal leakage than the dentin/cementum margins(P<0.001). 3. There was no significant difference in the degree of the marginal leakage between Silux$^{(R)}$-Scotch Bond 2$^{(R)}$ group and Silux$^{(R)}$-All Bond$^{(R)}$ group.

• Applied Biological Chemistry
• /
• v.27 no.1
• /
• pp.21-28
• /
• 1984

The milling property of ti different Australian Wheat varieties (Australian Prime Hard (APH), Australian Hard (AH), Western Australian Wheat (WAW), South Australian Wheat (SAW), Australian Standard White (ASW) and Australian Soft Wheat (SW) was investigated by using $B{\ddot{u}}hler$ test mill. The flour characteristics were evaluated by farinograph, mixograph, amylograph, sedimentation and pelshenke tests. The milling race of Australian wheats varied from 59% to 66%, and that of Suwon 219 (Korean variety) was 65.5%. The milling rate was significantly related to the seed weight but less extent to the bulk density of grain. The flours obtained from the wheat varieties exhibited distinctly different chemical compositions and dough properties. The protein content of the flour varied from 14.47% (APH) to 6.59 % (SW). The gluten forming ability of APH and AH was very high, but very low with ASW and Sw. On the other hand, ASw and WAW showed very high gelatinized viscosity, while SAW marked exceptionally low viscosity.

• The Korean Journal of Mycology
• /
• v.41 no.2
• /
• pp.85-90
• /
• 2013

This study investigated the internal and external morphological characteristics of decomposition and browning of oak sawdust medium for ground bed cultivation of Lentinula edodes. Within fifty days after L. edodes inoculation, surface hyphae on the bed browned. In 110 days, the fungal hyphae occupied and decomposed wood fibers, vessels and parenchymatous cells from the inside as white profuse hyphal mass was amorphously dissolving the saw dust particles from the outer surface. Most of the white hyphal bed surface became cleanly brown, however, some colony surface became blackened and slimy with contaminating bacteria, hyphae and spores. The brown layer was ca. 0.34 mm thick with highly dense and white hyphal mass beneath, whereas the blackened layer was ca. 1.17 mm thick with shrunken hyphae and less decomposed sawdust particles beneath. The surface hardness of the brown surface was ca. $0.73kgf/cm^2$, soft and resilient, while that of the blackened was ca. $0.91kgf/cm^2$, hard and nonresilient. By 150 days Lentinula edodes mushrooms fruited only on the brown surface and not on the blackened medium.

• Journal of Korea Multimedia Society
• /
• v.15 no.2
• /
• pp.226-233
• /
• 2012

Recently, Like we saw with 3.4 DDoS Cyber Terror, a behavior of cyber terror becomes increasingly more complicated, sophisticated and larger, and there has been largely damage on industry, the general economy. For responding cyber terrors which occur in the future, we should recognize security holes of system which isn't exposed yet before attacker in advance as we anticipate and implement new technique of cyber attack which not exist hitherto. We design and implement a new technique of cyber attack; it seems to us that a server denies agent' service by altering value of registry in windows system. Network connections of agent are restricted to the new technique we suggest as the a value of registry is changed to a less value than a necessary value and there has happened packet loss by attacker.