• Journal of Advanced Navigation Technology
• /
• v.27 no.6
• /
• pp.782-787
• /
• 2023

Korea augmentation satellite system (KASS) integration, verification, qualification (IVQ) activity is verification of requirements for KASS system and its sub-system that were performed based on the inspection, analysis, review of design, test (IART) method from factory acceptance test (FAT) to test readiness review (TRR) after critical design review (CDR) was closed. In the FAT phase, developed equipment was installed on the test platform and we were verified interfaces between sub-systems and coupling test with the kass control station (KCS). In the site aceeptance test (SAT) phase, on-site verification was conducted by installing equipment verified by FAT such as kass reference station (KRS), kass processing station (KPS), kass uplink station (KUS), KCS. However, considering the developed plan and status, SAT was divided into 3 phases and coupling test was performed. In the TRR phase, the KASS system verification was performed through FAT's test list and additional test list using the satellite based augmentation system (SBAS) broadcast signal from geostationary earth orbit (GEO) 1.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.26-37
• /
• 2019

Recently, standardization of installation progress and technology of site acceptance test(SAT) for energy storage system(ESS) are being required due to performance of ESS depending on working condition and environment even though the quality and safety of each component of ESS　is guaranteed. And also, it has been required to perform not only performance testing by H/W equipments but also performance verification by S/W tool, in order to more accurately and reliably validate the performance of the ESS in advanced countries. Therefore, this paper proposes evaluation algorithm for SAT to evaluate performance of ESS and presents modeling of SAT test equipment for ESS by using PSCAD/EMTDC. Furthermore, 30[kW] scaled portable test equipments is implemented based on the proposed algorithm and modeling. From the various simulation and test results, it is confirmed that performance of ESS related to characteristics of capacity and Round-trip efficiency, Duty-cycle efficiency, low voltage ride through(LVRT) and Anti-islanding can be accurately evaluated and that the simulation results of PSCAD/EMTDC are identical to test results of 30[kW] test equipment.

• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.2
• /
• pp.145-151
• /
• 2021

According to the Korea Augmentation Satellite System (KASS) system milestone, Site Acceptance Test (SAT) has three steps test until the end of the project. SAT#1 is the first time of SAT steps and verify the KASS Reference Station (KRS) and Sub System (S/S) for the monitoring and controllable. After the equipment and software were installed at the Mission Control Center (MCC) with Central Monitoring and Control Simulator (CMS) for the SAT#1, the 1:1 test was progressed when the KRS and S/S are ready to test. SAT#1 has a 10 steps test case and it was progressed each KRS sites. The test was finished throughout the real-time monitoring and the data collection including the data analysis all of the 7 KRS sites. Finally SAT#1 was completed on December 2020 with successfully.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.6
• /
• pp.715-723
• /
• 2018

The energy storage system consists of batteries, power conditioning system and energy management system. If ESS is installed and operated in the field, SAT(Site Acceptance Test) of ESS is being essentially required for the safety and performance of ESS. Furthermore, in order to more accurately and reliably validate the performance of the ESS in advanced countries, it has been required to perform not only performance testing by H/W equipments but also performance verification by S/W tool. Therefore, this paper proposes the modeling of portable test equipment in order to evaluate the performance and reliability of ESS by using the PSCAD/EMTDC S/W. And also, the prototype of 30[kW] scaled portable test equipments is implemented based on the S/W modeling. From the results of various simulations and testings such as power quality, LVRT and anti-islanding tests, it is confirmed that 30[kW] scaled portable test equipment is useful for SAT of ESS, because the simulation results of PSCAD/EMTDC are identical to them of 30[kW] test equipment at the same test conditions.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.1-5
• /
• 2005

High-speed trains with maximum speed of 300km/h, named KTX, have started revenue services since April 2004. Is becoming big problem where currently the KTX train because excessive braking noise at a station platform. The KTX braking noise follows in operating mode of KTX train and important railroad station where the quality appears different, the quality against hereupon from the commerce vehicle from the research which it sees it executes and comparison to analyze.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.187_188
• /
• 2009

본 논문은 IEC 61850 기반의 전력IT기기에 대한 시험 및 평가방법에 대해 다루었다. 여러 제조업체에서 제작한 IEC 61850 기반 전력IT기기는 현장과 같은 실제 사이트에서 구성된다. 현장시험(SAT: site acceptance test)은 운전하기 이전에 고객에게 확신을 주기위해 사이트에 설치된 모든 장비에 대해 시험 및 평가를 수행한다. 적합성 시험(conformance test)은 효율적인 현장시험을 위해서 수행해야 한다. 그러나 적합성시험을 통과한 장비일지라도 통합작업, 검수시험 및 운전하는 경우 문제가 발생할 수도 있다. 따라서 통합작업, 검수시험 및 운전하는 경우에 문제점을 최소화하기 위해 적합성시험뿐만 아니라 상호운용성 시험을 수행해야 한다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2002.10a
• /
• pp.330-337
• /
• 2002

The HANARO seismic monitoring system is classified as non-nuclear safety(NNS), seismic category I, and quality class T The seismic monitoring system installed at the instrument room consists of five field sensors and one monitoring cabinet. The field sensors are composed of three triaxial accelerometers which installed at base slab, free field and overhead crane support respectively, a seismic trigger and a seismic switch at base slab. The most parts of analog system except field sensors are not produced any more, the improvement of the system is to be needed. The analog system with magnetic tape recorder is not only out-of-date model but dependent upon foreign technology. So it is difficult to get the spare parts and the cost to buy them is increased. Therefore we have improved the analog seismic monitoring system into a new digital seismic monitoring analysis system(SMAS) except five field sensors. After the installation of the new SMAS, we have carried out the site acceptance test(SAT) to confirm the field functions. The results of SAT satisfy the requirements of the fabrication technical specification. This new SMAS is operating at HANARO instrument room to acquire and analyse the signal of earthquake.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.341-344
• /
• 2005

High-speed trains with maximum speed of 300km/h, named KTX, have started revenue services since April 2004. Because of the geographical features of Korea a large portion of the 'Kyung-Bu' line is comprised of tunnels, which may cause excessive noise in a vehicle. The KTX interior noise follows in tunnel structure and the place where the quality appears different, the quality against hereupon from the commerce vehicle from the research which it sees it executes and comparison to analyze.

• Proceedings of the KIPE Conference
• /
• 2015.11a
• /
• pp.227-228
• /
• 2015

우리나라가 조달하는 ITER(국제핵융합시험로) 초전도자석 전원장치용 변압기는 CCU/L(Correction Coil Upper/Lower) 컨버터 형식용 6대, CCS(Correction Coil Side) 컨버터 형식용 3대, VS1(Vertical Stabilization 1) 컨버터 형식용 2대, CS(Central Solenoid) 컨버터 형식용 6대 그리고 TF(Toroidal Field) 컨버터 형식용 1대로 구성되어 있다. ITER한국사업단은 (주)효성과 컨버터 변압기의 공급계약을 2011년에 체결하고 예비 설계를 시작하여 2014년에 최종설계를 마친 후 동년 후반부터 CCU/L, CCS 및 VS1 컨버터 형식용 각 1대씩의 초도품 변압기 제작에 착수하였다. 각 변압기는 제작이 완료되어 CCU/L 및 CCS 형식은 FAT(Factory Acceptance Test)를 완료하였고 VS1 형식은 공장 자체시험을 완료하고 현재 전기연구원에서 실시할 단락시험을 준비하고 있다. 이어 CS 형식의 초도품과 1대만 조달하는 TF 형식의 제작을 착수할 예정이고, 각 형식별 초도품 1대씩은 단락시험을 포함하는 형식시험(Type Test)을 실시하여 형식별 적합성을 검증하고, 나머지 물량은 정기시험(Routine Test)을 실시한 후 2017년까지 두 번으로 나누어 프랑스 남부에 위치한 ITER 현장에 운송 및 설치할 예정이다. 설치를 마친 변압기들은 각각의 컨버터 짝과 통합시험을 포함하는 SAT(Site Acceptance Teat)를 거친 후 ITER 기구에 인계될 예정이다.

• Journal of Positioning, Navigation, and Timing
• /
• v.12 no.1
• /
• pp.83-89
• /
• 2023

The Korea Augmentation Satellite System (KASS) system is a Satellite Based Augmentation System (SBAS) under development to provide APV-I SBAS service in the Republic of Korea. The KASS ground segment generates correction and integrity information for GPS measurements of KASS users using the accurate positions of KASS Reference Station (KRS) antenna phase centers. For this reason, the accuracy of KRS reference points through geodetic survey campaigns is one of the important factors for providing the KASS service in compliance with the required navigation performance. In order to obtain accurate positions, two geodetic survey campaigns were performed at several reference points, such as Mark, Center of Mast at Ground Level (CMGL), and Center of Hole in Top Plate (CHTP), of each KRS site using three different survey methods, the Virtual Reference Station (VRS), Flächen Korrektur Parameter (FKP), and raw data post-processing methods. By comparing and analyzing the results, the computed coordinates of the reference points were verified and Antenna Phase Center (APC) positions were calculated using KRS Antenna Reference Point (ARP) data, and the first KASS Site Acceptance Test (SAT#1) was performed successfully using the verified APC coordinates. After the first site survey activities, the KASS operators should maintain the coordinates with the required performance such that the overall KASS navigation performance commitment is guaranteed during the lifetime of 15 years. Therefore, the maintenance plan for the KRS antenna coordinates should be developed before the commissioning of KASS operation planned after 2023. Therefore, this paper presents a geodetic survey method selected for the maintenance activities and provides the rationale for using this method.