• Imaging Science in Dentistry
• /
• v.45 no.1
• /
• pp.15-22
• /
• 2015

Purpose: This study was performed to assess the reproducibility of identifying the sella turcica landmark in a three-dimensional (3D) model by using a new sella-specific landmark reference system. Materials and Methods: Thirty-two cone-beam computed tomographic scans (3D Accuitomo$^{(R)}$ 170, J. Morita, Kyoto, Japan) were retrospectively collected. The 3D data were exported into the Digital Imaging and Communications in Medicine standard and then imported into the Maxilim$^{(R)}$ software (Medicim NV, Sint-Niklaas, Belgium) to create 3D surface models. Five observers identified four osseous landmarks in order to create the reference frame and then identified two sella landmarks. The x, y, and z coordinates of each landmark were exported. The observations were repeated after four weeks. Statistical analysis was performed using the multiple paired t-test with Bonferroni correction (intraobserver precision: p<0.005, interobserver precision: p<0.0011). Results: The intraobserver mean precision of all landmarks was <1 mm. Significant differences were found when comparing the intraobserver precision of each observer (p<0.005). For the sella landmarks, the intraobserver mean precision ranged from $0.43{\pm}0.34mm$ to $0.51{\pm}0.46mm$. The intraobserver reproducibility was generally good. The overall interobserver mean precision was <1 mm. Significant differences between each pair of observers for all anatomical landmarks were found (p<0.0011). The interobserver reproducibility of sella landmarks was good, with >50% precision in locating the landmark within 1 mm. Conclusion: A newly developed reference system offers high precision and reproducibility for sella turcica identification in a 3D model without being based on two-dimensional images derived from 3D data.

• Korean journal of food and cookery science
• /
• v.22 no.4 s.94
• /
• pp.438-446
• /
• 2006

This study surveyed the Kimchi preference for French, potential Kimchi improvement for French market adaptation and Kimchi application for French cuisine, with the aim of spreading the recognition of Kimchi throughout the world, especially in France, by giving information and developing local types which could be expected to be suitable for utilization of French food life. The Kimchi experience of 100 persons in France was surveyed for the study. Most (72.0%) had no experience. For the preference of red Kimchi in palatable ripening period depending on sexes, women had a higher Score (M=4.04${\pm}$0.88) than men (M=3.91${\pm}$0.91) did. In the case of white Kimchi, women had a higher score (M=4.09${\pm}$0.90) than men (M=3.98${\pm}$1.01) did, also. The attraction reason of Kimchi for males was the chewing feel, healthy food and spicy taste, and for females was the chewing feel, spicy taste and healthy food orderly. However, the other side of the Kimchi improvement point was decreased fermented order, spicy taste and salinity, but improved orderly appearance. Thus, the Kimchi development point for French was keeping the crisp chewing feel, fermenting better at the fresh than ripening, reducing the fermented order and controlling the spice taste. Types of fermented food similar to Kimchi were involved in more than 80% of French cuisine, with the most common in the survey being pickled cabbage, followed by cabbage salary and fermented salted food orderly. The Kimchi utility as a raw ingredient or a seasoning for French cuisine was firstly as an accompaniment with meat cuisine, followed by appetizer, eating with cooked rice, eating with fish cuisine, orderly for males, whereas for females it was eating with cooked rice, followed by appetizer, eating with fish cuisine and eating with fried potato and orderly. Thus, the French had a similar view to Koreans regarding the accompaniment of Kimchi meat. The developed fusion Kimchi foods were 'Poitrine de porc caramelisee au miel et Kimchi', 'Blanc de barbue aux crevettes roses et Kimchii', 'Kimchi SpringRoll' and 'Potage saint-Germain aux Kimchi'. The French preference for Kimchi utility was generally a high score for the eating the cuisine in which Kimchi was added to meat cuisine.

• Research in Plant Disease
• /
• v.19 no.2
• /
• pp.95-101
• /
• 2013

Black rot caused by Xanthomonas campestris pv. campestris (Xcc) is one of the most serious diseases of crucifers world-wide. To establish the efficient screening method for resistant cabbage to Xcc, different inoculation methods, inoculation positions, growth stages of seedlings, and incubation temperatures after inoculation were investigated with the seven cabbage cultivars showing different resistance degrees to the pathogen. Clipping with mouse-tooth forceps was better inoculation method than piercing with 18 pins or cutting with scissors to distinguish the level of resistance and susceptibility. In inoculation using mouth-tooth forceps, clipping the edges of the leaves near veins is more effective than injuring the veins of the leaves directly. In addition, the inoculated plants kept at $22^{\circ}C$ showed more clear resistant and susceptible responses than those kept at 26 or $30^{\circ}C$. On the basis of the results, we suggest that an efficient screening method for resistance of cabbage cultivars to black rot is to clip the edges of the leaves near veins of the four-week-old seedlings with mouth-tooth forceps dipped in a suspension of Xcc at a concentration of $7{\times}10^7$ cfu/ml and incubate the inoculated plants in a growth room at $22^{\circ}C$ with 12-hr light a day.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.20 no.2
• /
• pp.82-89
• /
• 2009

Objectives: Children with attention-deficit hyperactivity disorder(ADHD) often have difficulties in social behavior. The aim of this study was to evaluate the effectiveness of a short-term training program for improving social skills, self-perception and attention deficits. Methods: The subjects were nine children diagnosed with ADHD with(or without) other mental disorders using the Diagnostic Interview Schedule for Children(DISC-ADHD) module. Children were given eight sessions of a social skills training program. Parents of children simultaneously participated in their own training which was designed to support their children's generalization of skills. Assessments included child, parent and teacher ratings of social skills, self-perception and attention deficit at baseline and post-treatment. Results: Social skills training led to significant improvements in child-reported measures of self-esteem, in teacher reported measures of social skills, and in parent-reported measures of attention deficit. Conclusion: This study suggests that short-term social skills training programs for children with ADHD may improve their social skills, self-perception and attention deficits.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.27 no.1
• /
• pp.18-21
• /
• 2017

In this study, spherical monodispersed cerium-doped yttrium aluminum garnet (YAG : $Ce^{3+}$) phosphor particles were synthesized via homogeneous precipitation method using the mixed solution of yttrium nitrate, cerium nitrate, aluminum nitrate, ammonium aluminum sulfate, and urea as a precipitant. During the process of precursors of monodispersed YAG : $Ce^{3+}$, aluminum ions which form spherical aluminum compounds precipitated first and yttrium compounds precipitated onto the surface of the existing spherical aluminum compounds. Drying process using lyophilization could obtain monodispered spherical YAG : $Ce^{3+}$ particles compare to using oven. The thermal calcination process of YAG : $Ce^{3+}$ precursors under the temperature of $1200^{\circ}C$ for 6 h was enough to obtain 400~500 nm sized YAG particles with pure YAG phase.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.6
• /
• pp.856-860
• /
• 2013

The objective of this study was to investigate the effects of administration methods for on Garcinia cambogia on blood Garcinia cambogia concentration and antioxidative levels. Rats were divided into three groups: G1 (normal group), G2 (one administration of Garcinia cambogia extract 2,800 mg/kg b.w.), G3 (three separate administrations every 6 h of Garcinia cambogia extract 750, 850, and 1,200 mg/kg b.w. for 18 h). Blood samples were collected every hour, and animals sacrificed 18 h after the oral administration of Garcinia cambogia extract. We examined changes in the serum concentration of Garcinia cambogia by HPLC analysis. Two hours following an oral administration of Garcinia cambogia extract (2,800 mg/kg b.w.), serum Garcinia cambogia levels reached their maximum, but gradually decreased until 10 hours when it was no longer detectable. In contrast, serum Garcinia cambogia levels under G3 administration were maintained above a certain level after 18 h. To determine whether this level of Garcinia cambogia could affect blood oxidative levels, we measured serum lipid peroxidation by TBARS levels. TBARS levels from G3 treatment were significantly lower than G1 and G2. To analyze other antioxidative activities, radical scavenging activities were measured by the DPPH and ABTS radical scavenging assays. There were no significant differences between the groups in DPPH radical scavenging activity. However, ABTS radical scavenging activity significantly increased with G3 treatment compared with G1 and G2. In conclusion, our data show that three times administration of Garcinia cambogia every 6 h may helpful for maintaining serum Garcinia cambogia levels and antioxidative effects.

• Journal of the Korean Society of Costume
• /
• v.22
• /
• pp.159-176
• /
• 1994

This study's purpose is to find the ancient costume of the folk song's words on Dunhuang manuscripts in the background wass-carvings sculptures and several art works. Dunhuang had played the part of major route between ancient China and Europe. It is located on kam-suksong the west of China. 1. In the aspect of costume arrangement hair Styling is represented by Naegagyo, Wangyesa, Kyongburak, Bonkwyun, Pogurak, Chonsonja, Namgaja, Tongson-ga, Ojesa, Chanboja in Dunhuang manuscripts. tugue is sim-ilar to Sabyokkwanja in Naegagyo as of that time these kinds of Kwan-ja was very popular. It was told that emperor's wife concubine and maid of honor would wear kwnaja favorably. And the kinds of Tugeu is PuyongKwyunkye, Aangunkye, Chunkye from Kyuwanjon except Sangunkye, Ounkye in Dunhuangsa. 2. Jangdaegy is guoted from Kyuw-anjon -A series of the chinese history book-tells us about women's make-up . The narmes of make-up are Hongjang Unjan--g, Yiljang chwejang, Tam-ajang Murgjang, Sanagjang, Light-make up are referred in Naegagyo is included as packjang Besides we can find other make-up skills Huphwaro and Rujang from the Kaewonch onbon-wisa which was Yangkwibi's episodes. We can find the a corpus of song's words about cosmetic custom in Kor-ea. Which is 'Haecho' folk song in the souther-en costal regions 'Jinggum' folk song in Kim-hae regions and so on.... It's words is similar to Dunhuangsa in China. 3. Bichun inherited to China with India Bud-dism art in the middle of Dunhuang wall-pain-tings is one of the important Buddist saint. Sometimes it is painted with Giakchun Its arms of fly-dnacing in heaven with colored belt on body has almost the form of play on the musical instrument, We can see seasily the form in the painting of Buddist ser-mon. It was progressed and changed with the background of chinese traditional culture. When Dang's period came the color was chan-ged lighting dark blue has rhythmical and viv-id power of life. 4. Among the corpus of song's words which express the singers' system and rites of their tradition or habits. Dunhuang manuscripts des-cribes on behalf of the folk song's words in tra-ditional costume. This is following: (1) Naegagyo o sabyokwanja o Chyrasam o Rashang (2) Wangyesa o Sokryugun o Costume for fisher man (3) Bungajang of the chanboja o Ajang (4) Pongkwyun o Chongui (5) Tongsongs o Junofore (6) Namgaja o thin-Rasam (7) Yuchungnang o Hongsam o Sokryugun : The color of red costume (8) Kyongburak o Hongrasam o Sokryugun : Costume for charming woman Therefore traditional costume could be extracted according to the Dunhuang folk song's words out of culture such as learning rit-es three-obedience four-virtues and in-struction. As the same time it reflects ancient China's characteristics directly. I would endeavor to development for the history of the costume furher creative design and participat-ed in research activity with concerns forward continuously.

• Composites Research
• /
• v.26 no.6
• /
• pp.363-372
• /
• 2013

Numerical simulation for Resin Transfer Molding manufacturing process is attempted by using the eXtended Finite Element Method (XFEM) combined with the level set method. XFEM allows to obtaining a good numerical precision of the pressure near the resin flow front, where its gradient is discontinuous. The enriched shape functions of XFEM are derived by using the level set values so as to correctly describe the interpolation with the resin flow front. In addition, the level set method is used to transport the resin flow front at each time step during the mold filling. The level set values are calculated by an implicit characteristic Galerkin FEM. The multi-frontal solver of IPSAP is adopted to solve the system. This work is validated by comparing the obtained results with analytic solutions. Moreover, a localization method of XFEM and level set method is proposed to increase the computing efficiency. The computation domain is reduced to the small region near the resin flow front. Therefore, the total computing time is strongly reduced by it. The efficiency test is made with a simple channel flow model. Several application examples are analyzed to demonstrate ability of this method.

• Journal of Welding and Joining
• /
• v.30 no.5
• /
• pp.64-69
• /
• 2012

Sn-Bi eutectic alloy has been widely used as one of the key solder materials for step soldering at low temperature. The Sn-58Bi solder paste containing chloride flux was adopted to compare with that using the chloride-free flux. The paste was applied on the electroless nickel-immersion gold (ENIG) surface finish by stencil printing, and the reflow process was then performed at $170^{\circ}C$ for 10 min. After reflow, the solder joints were aged at $125^{\circ}C$ for 100, 200, 300, 500 and 1000 h in an oven. The interfacial microstructures were obtained by using scanning electron microscopy (SEM), and the composition of intermetallic compounds (IMCs) was analyzed using energy dispersive spectrometer (EDS). Two different IMC layers, consisting of $Ni_3Sn_4$ and relatively very thin Sn-Bi-Ni-Au were formed at the solder/surface finish interface, and their thickness increased with increasing aging time. The wettability of solder joints was investigated by wetting balance test. The mechanical property of each aging solder joint was evaluated by the ball shear test in accordance with JEDEC standard (JESD22-B117A). The results show that the highest shear force was measured when the aging time was 100 h, and the fracture mode changed from ductile fracture to brittle fracture with increasing aging time. On the other hand, the chloride flux in the solder paste did not affect the shear force and fracture mode of the solder joints.

• Journal of Korea Water Resources Association
• /
• v.43 no.2
• /
• pp.139-151
• /
• 2010

A quasi-two-dimensional unsteady flow model was developed for simulating the flow in a river system including artificial storage pockets with side weirs. It is a multiply-connected network which combines channels and storage pockets. The channel flow is described by the one-dimensional Saint Venant equations, and the weir overflow flow by the cell continuity and stage-discharge relations. The model was applied to the Imjin river system including six artificial storage pockets. Design flood peak reduction due to storage pockets is not sensitive to the side weir discharge coefficient. Storage pockets downstream are less effective than upstream ones in reducing peak stage as the backwater effect becomes more dominant. Simulated flood control effect is highly sensitive to the roughness coefficient. The uncertainty due to the roughness coefficient increases as the weir crest elevation gets higher. Because the best design alternative varies with the roughness coefficient, proper estimation of it is essential to the design of side weirs. Moreover, uncertainty of the estimation needs to be considered in the design process.