• Macromolecular Research
• /
• 제11권2호
• /
• pp.122-127
• /
• 2003

A glass-like carbon was fabricated using furan resin. The influence of heat treatment temperature during fabrication process on the chemical and micro-structural changes was studied by various analytical and spectroscopic methods including TGA, FT-IR, CHN, TEM and XRD. The chemical resistance properties of the fabricated glass-like carbon were also investigated. It has been found that the heat-treated samples at higher temperature up to 2600 $^{\circ}C$ in $N_2$ atmosphere had little weight loss, small amounts of functional groups, and high carbon content. The fabricated glass-like carbons upon heat treatment at 2600 $^{\circ}C$ showed an amorphous stage without any grain growth and/or reconstruction of structure. The glass-like carbon had much better chemical resistance than the artificial graphite, and exhibited a high chemical resistance due to its low surface areas, minimum impurities, and low graphite crystallites.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 춘계학술회의 초록집
• /
• pp.5-5
• /
• 2010

$(Na_{0.5}K_{0.5})NbO_3$ (NKN) ceramic with 1.5 mol% CuO added (NKNC) was well sintered even at a low temperature of $900^{\circ}C$ with the addition of ZnO. Most of the ZnO reacted with the CuO and formed the liquid phase that assisted the densification of the specimens at $900^{\circ}C$. A few $Zn^{2+}$ ions entered the matrix of the specimens and increased the coercive field ($E_c$) and $Q_m$ values of the specimens. High-piezoelectric properties of $k_p=0.37$, $Q_m=755$, and ${\varepsilon}_3\;^T/{\varepsilon}_0=327$ were obtained from the NKNC ceramics containing 1.0 mol% ZnO sintered at $900^{\circ}C$ for 2 h.

• The Korean Journal of Pain
• /
• 제25권1호
• /
• pp.47-51
• /
• 2012

Intrathecal drug administration system (ITDAS) can reduce the side effects while increasing the effectiveness of opioids compared to systemic opioid administration. Therefore, the use of ITDAS has increased in the management of cancer pain and chronic intractable pain. Catheter obstruction is a serious complication of ITDAS. Here, we present a case of catheter obstruction by a mass formed at the side hole and in the lumen. A 37-year-old man suffering from failed back surgery syndrome received an ITDAS implantation, and the ITDAS was refilled with morphine every 3 months. When the patient visited the hospital 18 months after ITDAS implantation for a refill, the amount of delivered morphine sulfate was much less than expected. Movement of the pump rotor was examined with fluoroscopy; however, it was normal. CSF aspiration through the catheter access port was impossible. When the intrathecal catheter was removed, we observed that the side hole and lumen of the catheter was plugged.

• 한국전기전자재료학회논문지
• /
• 제26권1호
• /
• pp.27-32
• /
• 2013

According to the composition of LTCC material, though it was thought that bulk defect which was made in forming process effects on the densification during the sintering, it was not reported systemically. In this study, we evaluated crystal structure, 3 point bending strength, hardness and microstructure of the samples by uniaxial pressing and tape casting using the commercial powders of the crystallizing glass and the glass/ceramic composite. In the case of glass/ceramic composite, Viox-001 powder with residual glass in the sintering, 3 point bending strength was similar regardless of forming process due to fill the bulk defect by residual glass. In the case of crystallizing glass, MLS-22, because glass phase was small in the sintering, glass did not fill the pore in the sample by uniaxial pressing process, therefore, the 3 point bending strength of it was 167 MPa. However, the 3 point bending strength of the sample by tape casting was 352 MPa and much higher. Meanwhile, crystal structure and hardness were similar regardless of forming process.

• 한국전기전자재료학회논문지
• /
• 제17권4호
• /
• pp.384-389
• /
• 2004

Crystal structure and microwave dielectric properties of Ba(Mg1/3Nb2/3) $O_3$ (BMN) ceramics were investigated. Ba(Mg1/3Nb2/3) $O_3$ has the 1:2 ordered hexagonal structure. The 1:2 ordering and relative density of specimens increased with small Mg deficiency(x). The variation of Q${\times}$ $f_{0}$ with Mg deficiency is very similar to that of 1:2 ordering and relative density. The highest Q${\times}$ $f_{0}$ achieved in this investigation is about 96,000 for Ba(Mg1/3Nb2/3) $O_3$. The improvement of Q${\times}$ $f_{0}$ with Mg-deficiency is related to the increase of degree of ordering and relative density of the specimen.

• 한국재료학회지
• /
• 제18권3호
• /
• pp.159-162
• /
• 2008

$Eu^{3+}$-activated $R_3GaO_6$ (R = Y, Gd) phosphors were prepared in a conventional solid-state reaction and their optical properties were investigated. These compounds exhibit strong red emission under light excitation at 254 nm. The emission spectra are dominated by peaks appearing around 610-630 nm that are induced by the electric dipole transition of $^5D_0\;{\rightarrow}\;^7F_2$ of $Eu^{3+}$. In addition, the appropriate CIE (Commission Internationale de l'clairage) chromaticity coordinates, (x = 0.656, y = 0.336) for $Y_3GaO_6$ and (x = 0.655, y = 0.334) for $Gd_3GaO_6$, become closer to the NTSC (National Television System Committee) standard values. With the optimized activator concentrations, the maximum emission brightness is approximately 80% of $Y_2O_3$:$Eu^{3+}$ typical red-emitting phosphor with improved color purity under an excitation condition of 254 nm.

• 한국재료학회지
• /
• 제6권6호
• /
• pp.651-656
• /
• 1996

InGaAs/InGaAsP 다층박막을 corrugation이 형성된 InP 기판위에 MOVPE 방법을 이용하여 성장 시킨 후 성장조건에 따른 corrugation 높이의 변화와 석출상에 대하여 투과전자현미경을 이용하여 시킨 후 성장조건에 따른 corrugation 높이의 변화와 석출상에 대하여 투과전자현미경을 이용하여 연구하였다. Corrugation이 형성된 InP 기판을 PH3 및 AsH3가스를 동시에 공급해 주었는데 AsH3 가스의 압력이 높으면(1.8x10-2torr)많은 양의 As를 포함한 In1-xAsxP(x=0.3)석출상이 격자결함과 더불어 형성되었다. 반면에 AsH3 가스의 압력이 낮을때는 (1.0x10-3torr) corrugation의 높이가 30nm이었고, 적은 양의 As를 포함한 In1-xAsxP(x<0.1)석출상이 격자결함이 없이 형성되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.283-287
• /
• 2003

Crystal structure of $(Ba_{1-x}La_x)[Mg_{(1+x)/3}Nb_{(2-x)/3}]O_3$ (BLMN) ceramics with $0{\leq}x{\leq}1$ was investigated using synchrotron X-ray powder diffraction (XRD) and high resolution transmission electron microscopy (HRTEM). When La content, x, is above 0.1, the 1:2 ordered hexagonal structure found in $Ba(Mg_{1/3}Nb_{2/3})O_3$ (BMN) was transformed into 1:1 ordered cubic structure. The 1:1 ordered cubic structure was maintained up to x=0.7. However, when x exceeded 0.7, BLMN was transformed 1:1 ordered structure which has cation displacement and in-phase and anti-phase tilt of octahedra.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.125-129
• /
• 2004

[ $BaTi_4O_9$ ] thin film were grown on $Pt/Ti/SiO_2/Si$ substrate using rf magnetron sputter, and the microstructure and dielectric properties of the thin films were investigated. For the film grown at $350^{\circ}C$ and rapidly thermal annealed at $900^{\circ}C$, the $BaTi_5O_{11}$ Phase was formed. However, the $BaTi_4O_9$ phase was formed when the growing temperature exceeded $450^{\circ}C$ The dielectric constant of the $BaTi_4O_9$ thin film grown at $550^{\circ}C$ and rapidly thermal annealed at $900^{\circ}C$ was about 40 at low frequency range($100kHz{\sim}1MHz$) and 36 at microwave range($1{\sim}10GHz$) which is very close to that of the bulk $BaTi_4O_9$ phase. The dissipation factor was very low, about 0.005 at low frequency as well as microwave range.

• 한국세라믹학회지
• /
• 제44권5호
• /
• pp.173-178
• /
• 2007

The microstructure and microwave dielectric properties of dolomite type borates, $CaZr(BO_3)_2$ ceramics prepared by conventional mixed oxide method were explored. The sintering temperature of $CaZr(BO_3)_2$ ceramics could be reduced from $1150^{\circ}C\;to\;925^{\circ}C$ with little amount of sintering additives. Microwave dielectric properties of 3 wt% $Bi_2O_3-CuO$ added $CaZr(BO_3)_2$ ceramics sintered at $925^{\circ}C$ were $K{\approx}10.4,\;Q{\times}f{\approx}80,000GHz\;and\;TCF{\approx}+2ppm/^{\circ}C$. Thus obtained LTCC tape was co-fired with Ag paste for compatibility test and revealed no sign of Ag reaction with the ceramics. Therefore, $CaZr(BO_3)_2$ ceramics is considered as a possible candidate material for low temperature co-fired multilayer devices.