• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.1
• /
• pp.51-57
• /
• 2012

This study investigates structural and fatigue analyses at bicycle pedal. Maximum deformation at model 1 is 2 times as much as model 2 at static analysis. Models 1 and 2 have the possibility of the weakest strength at the part of contact with chain gear. Among the cases of nonuniform fatigue loads at Models 1 and 2, 'SAE bracket history' with the severest change of load becomes most unstable but 'Sample history' becomes most stable. In case of 'Sample history' with the average stress of 0 to $-10^4$ MPa and the amplitude stress of 0 to $10^4$ MPa, the possibility of maximum damage becomes 4%. This stress state can be shown with 5 to 7 times more than the damage possibility of 'SAE bracket history' or 'SAE transmission'. The analysis result of this study can be effectively utilized with the safe design of pedal.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.3
• /
• pp.239-244
• /
• 2011

This study analyzes the behaviors on stress, fatigue and vibration about bulldozer in operation. Maximum equivalent stress is shown with the frequency of 100 Hz in case of the harmonic vibration analysis applied with force. Among the cases of nonuniform fatigue loads, 'SAE bracket history' with the severest change of load becomes most unstable but 'Sample history' becomes most stable. In case of 'Sample history' with the average stress of 0 to -105MPa and the amplitude stress of 0 to $1.617{\times}105MPa$, the possibility of maximum damage becomes 3.23%. This stress state can be shown with 5 times more than the damage possibility of 'SAE bracket history' or 'SAE transmission'. The structural result of this study can be effectively utilized with the design of bulldozer by investigating prevention and durability against its damage.

• Electronics and Telecommunications Trends
• /
• v.21 no.3 s.99
• /
• pp.23-35
• /
• 2006

3GPP는 HSPA와 같은 라디오 액세스 기술의 개선을 바탕으로 다가오는 수 년 동안 높은 경쟁력을 가질 것으로 예측된다. 그러나 3GPP에서는 급속히 발전되는 정보통신서비스를 효율적으로 제공하기 위해, 3GPP R6 기술과 비교하여 사용자와 사업자의 비용을 줄이면서도 고품질의 다양한 서비스를 제공하는 새로운 이동통신기술의 필요성을 인식하고, 낮은 전송 지연(low latency), 높은 전송률(high data rate), 시스템 용량과 커버리지를 개선하는 3G long term evolution 표준기술 작성을 시작하였다. 이에 따라 지난 2004년 말부터 3GPP에 참여한 사업자, 벤더, 연구소 등은 2007년 6월 표준규격작성완료를 목표로 LTE와 SAE에 대한 연구를 진행해 오고 있다. 이들 연구는 상호 운용성을 제공하기 위한 기술적 솔루션을 최소로 하면서 불필요하게 중복되는 필수 특성들을 줄이고 다양한 액세스 네트워크 사이에서 모빌리티를 제공하는 것을 목적으로 하고 있다. 본 문서에서는 2006년 3월까지 진행된 3GPP의 표준화 및 기술 동향에 대해살펴본다.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.556-557
• /
• 2012

국내에서 활발히 진행중인 스마트 그리드(Smart Grid) 사업분야에 속해 있는 스마트 트랜스포테이션(Smart Transportation) 사업에서는 전기차를 이용한 운영에 중점을 두고 진행이 되고 있다. 그러나 실제적으로 전기차를 운영하기 위해서는 운영에 충분한 충전 인프라가 구축되어야 하며 충전 인프라를 구축하기 위해서는 그에 맞는 충전 시스템을 갖추어야 한다. 충전 시스템에는 현재, 완속 충전기와 급속 충전기가 주를 이루고 있으며 본 논문에서는 완속 충전기의 표준화의 일환으로 미국자동차기술학회에서 제시하는 SAE-J1772 규격에 맞추어 개발한 자사의 완속 충전기에 관하여 소개하고자 한다.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2000.11a
• /
• pp.273-279
• /
• 2000

Until recently performance requirements for automatic transmission fluids have continued to change to reflect the design changes of automatic transmission. The major purpose for these design changes is to improve the fuel economy and easy driving. To meet recent performance requirements fur automatic transmission the needs for special base oils Bike API Group III and IV base oils become larger. In this paper to evaluate the effects of base oils on performance of automatic transmission fluids formulated with API Group I,II,III and IV and Dexron III and Hereon Type additive package, Brookfield viscosity, oxidation test, SAE No.2 friction test and seal compatibility test were examined. From the test we knew that the use of Croup III and IV base oils in ATF has several benefits in low temperature viscosity, oxidation stability and SAE No.2 friction characteristics.

• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.3
• /
• pp.87-92
• /
• 2011

This study analyzes structural stress and fatigue on control arm of automobile under nonuniform load. Maximum equivalent stress at bolt part is shown with 419.1MPa and the corner is deformed with maximum displacement of 1.1628mm. Among 3 cases of nonuniform fatigue loads applying on control arm, 'SAE bracket history' with the severest change of load becomes most unstable but 'Sample history' becomes most stable. In case of 'Sample history' with the average stress of $-10^5MPa$ to $10^5MPa$ and the amplitude stress of 0 MPa to $10^5MPa$, the possibility of maximum damage becomes 3%. This stress state can be shown with 6 times more than the damage possibility of 'SAE bracket history' or 'SAE transmission'. Safety and durability on automobile can be effectively improved by applying the fatigue analysis result on control arm.

• Structural Engineering and Mechanics
• /
• v.81 no.5
• /
• pp.647-664
• /
• 2022

The powerful data mapping capability of computational deep learning methods has been recently explored in academic works to develop strategies for structural health monitoring through appropriate characterization of dynamic responses. In many cases, these studies concern laboratory prototypes and finite element models to validate the proposed methodologies. Therefore, the present work aims to investigate the capability of a deep learning algorithm called Sparse Autoencoder (SAE) specifically focused on detecting structural alterations in real-case studies. The idea is to characterize the dynamic responses via SAE models and, subsequently, to detect the onset of abnormal behavior through the Shewhart T control chart, calculated with SAE extracted features. The anomaly detection approach is exemplified using data from the Z24 bridge, a classical benchmark, and data from the continuous monitoring of the San Vittore bell-tower, Italy. In both cases, the influence of temperature is also evaluated. The proposed approach achieved good performance, detecting structural changes even under temperature variations.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.15 no.4
• /
• pp.403-409
• /
• 2017

For dry storage of the spent nuclear fuel (SNF) stored in the storage pool of a nuclear power plant, essentially all moisture must be removed to prevent corrosion of the assembly and canister internals and/or degradation of fuel cladding integrity after SNF canister loading operation. R&D work is now in progress on a forced gas drying system that can be used to remove residual water in canisters. In this work, preliminary design is performed to manufacture the forced gas drying system. This process includes a case study of dry methods for canister moisture removal, relative codes and standards, confirmation of adequate dryness, needs analysis at plant sites, and characteristics of SNF stored in pools. Through this preliminary design work, we obtained a conceptual flow diagram and preliminary P&ID of the forced gas drying system. The results of this study can be used to determine details of the design to manufacture the forced gas drying system.

• (The)Study of the Eastern Classic
• /
• no.66
• /
• pp.193-226
• /
• 2017

This writing establishes identity of JinSeBaek, a male protagonist from a classical novel Hajinyangmunrok, through examining his relationship with a female character named HaOkJu. The character JinSeBaek was analyzed with attachment theory. JinSeBaek is a type of character who openly expresses his emotions. The evidence that JinSaeBaek falls in love with HaOkJu at a first sight was mainly shown through his physical affection with her. After the breakup, JinSeBaek expresses sadness, depression, and anger, as well as sheds tears. Although JinSeBaek repeatedly breaks up and gets back together with HaOkJu, JinSaeBaek consistently shows his desire to be with HaOkJu. Expressing true emotions was not ideal characteristic for men in this era. JinSaeBaek develops attachment to HaOkJu after he loses his parents, whom he has previously developed attachment to, but repeated break ups with HaOkJu leads to separation anxiety. Although his separation anxiety is caused by HaOkJu, it is also HaOkJu who can resolve the anxiety. The fact that JinSaeBaek honestly expresses his emotions and develops abnormal attachment to woman makes JinSaeBaek unique from other male protagonists. A character like JinSaeBaek is not common in other fictional novels or romance novels as well. Thus, JinSaebaek is claimed to be extraordinary character in literature.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.5
• /
• pp.97-104
• /
• 2023

The aim of this study was to produce polymer cement composites (PCCs) composed of polymer dispersion and cement as crack repair materials for RC structures, and to investigate their fundamental properties. The test mixtures for the study were based on EVA and SAE polymer dispersions, and the water-cement ratio was determined while varying the polymer-cement ratio(P/C) in four different levels (20%, 60%, 80%, and 100%) to achieve the desired viscosity of PCCs considering their fillability as crack repair materials. Additionally, silica fume was incorporated into P/C 80% and 100% specimens to enhance their stiffness. The basic properties of PCCs as crack repair materials, such as viscosity, flowability, fillability, tensile strength, elongation, and modulus of elasticity, were examined. The results showed that P/C depending on the type of polymer significantly affected the viscosity and flowability, and appropriate w/c ratios were needed to achieve the desired viscosity for the mixture design with consideration of fillability as crack repair materials for RC structures. All designed mixtures in this study exhibited excellent fillability. The tensile strength and elongation of PCCs satisfied the KS regulation for cement- polymer modified waterproofing coatings. The incorporation of silica fume improved the tensile strength and modulus of elasticity of PCCs. Depending on the type of polymer, mixtures using SAE showed better fundamental properties as crack repair materials for RC structures compared to those using EVA. In conclusion, SAE-based P/C 80% or 100% with the addition of up to 30% silica fume can be recommended as suitable mixtures for crack repair of RC structures.