• 제목/요약/키워드: S.B.E Method

검색결과 962건 처리시간 0.029초

전압 불안정시 PSS/E 사용자 정의모델로 구현된 거리계전기 응동 특성 (Operating Characteristic of a User Defined Distance Relay Model in PSS/E during Voltage Instability)

  • 이동규;강상희;양정재;오화진;장병태
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2003년도 추계학술대회 논문집 전력기술부문
    • /
    • pp.82-84
    • /
    • 2003
  • This paper presented a method to develop a relay model by the user-written model function of PSS/E. As for the voltage instability, although generator current limiters, transformer's tap-changers and dynamic loads have been considered as the dominant components, the protection system is also very important because it may influence the system's dynamic behaviour. Hence a distance relay model implemented with the suggested method was added, and then the operating characteristics of the distance relay under the voltage instability condition were investigated.

  • PDF

Binding energy study from photocurrent signal inphotoconductive a $ZnIn_2S_4$ thin films

  • Hong, Kwang-Joon
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2010년도 하계학술대회 논문집
    • /
    • pp.380-380
    • /
    • 2010
  • The chalcopyrite $ZnIn_2S_4$ epilayers were grown on the GaAs substrate by using a hot-wall epitaxy (HWE) method. The crystal field and the spin-orbit splitting energies for the valence band of the $ZnIn_2S_4$ have been estimated to be 0.1541 eV and 0.0129 eV, respectively, by means of the photocurrent spectra and the Hopfield quasicubic model. These results indicate that the splitting of the ${\Delta}so$ definitely exists in the $\Gamma_5$ states of the valence band of the $ZnIn_2S_4$/GaAs epilayer. The three photocurrent peaks observed at 10 K are ascribed to the $A_{1^-}$, $B_{1^-}$, and $C_1$-exciton peaks for n = 1. Also, we obtained the $A_{\infty^-}$ and B-exciton peaks from the PC spectrum at 293 K.

  • PDF

기중 다회선 부설에 대한 송전 케이블의 허용전류 저감계수에 관한 연구 (A Study on the Reduction Factor of the Permissible Current-Carrying Capability of Underground Transmission Power Cables installed in Free Air)

  • 정성환;김대경;최상봉;이동일;강지원;곽방명;탁의균;윤형희;김재승;박준호;김형수
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2001년도 하계학술대회 논문집 A
    • /
    • pp.343-345
    • /
    • 2001
  • This paper calculates the reduction factors of JCS 168E standard and IEC pub 287-2-2 according to installing groups of cables in a tunnel in Korean, respectively. Also, this paper proposes a method fat calculating reduction factors for groups of cables in free air.

  • PDF

$I^B-AI-VI^B_2$$I^B-AI-VI^B_2 :Co^{2+}$결정의 광학적 특성연구 (Optical Properties of $I^B-AI-VI^B_2$$I^B-AI-VI^B_2 :Co^{2+}$ Crystals)

  • 김화택;김창대;윤창선;진문석;최성휴
    • 한국진공학회지
    • /
    • 제4권3호
    • /
    • pp.334-341
    • /
    • 1995
  • IB-AI-VIB2 및 IB-AI-VIB2 :Co2+ 결정을 고순도 원소를 출발 물질로 하고 iodine을 수송 매체로 사용하여 chemical transport reaction method로 성장시켰다. 성장된 결정의 결정구조는 chalcopyrite 구조였으며, energy gap은 direct band gap으로 3.514~1.814 eV 정도로 주어졌으며, cobalt를 불순물로 첨가할 때 energy gap은 감소하였다. IB-AI-VIB2 :Co2+ 결정에서 첨가된 cobalt가 모체결정의 Td symmetry site에 Co2+ ion으로 위치하여, Co2+ ion의 energy 준위 사이의 전자전이에 기인하는 불순물 광흡수 peaks가 나타났다. 이 불순물 광흡수 peaks에 결정장 이론을 적용하여 구산 1st-order spin-orbit coupling parameter(λ)는 -183~ -189cm-1정도였고, 2nd-order spin-orbit coupling parameter(P)는 225~239 cm-1정도였으며, crystal field parameter(Dq)는 328~395cm-1, Racah parameter(B)는 531~552cm-1정도였다.

  • PDF

유용식물 유전자원의 수집 보존 및 이용에 관한 연구 -잡초를 대상으로- (Collection, Conservation, and Utilization of Plant Genetic Resources -emphasis on weeds-)

  • 김길웅
    • Current Research on Agriculture and Life Sciences
    • /
    • 제8권
    • /
    • pp.9-18
    • /
    • 1990
  • 1. 잡초종 54종을 수집 보관중이며 이들을 대상으로 발아력을 검정한 결과 치상후 15일째에 31종이 발아력을 보이고 그 가운데 50% 이상의 발아력을 보인것은 14종에 불과하여 대부분의 잡초종은 휴면의 정도에는 차이가 있지만 어떤 형태로든지 휴면성을 갖고 있는 것으로 구명되었다. 2. 우리나라에 발생하는 피속 잡초종은 외형적으로 여러종이 발생하는것 같았으나 2종만이 존재하는데 한 종은 강피이고 다른 종은 돌피와 변종으로 물피가 존재하는 것으로 밝혀졌다. 3. 종자의 단백질 패턴 검정으로 종자 형태학적으로 분류한 종들을 재점검해 본 결과 강피는 돌피와 물피와는 달리 B zone에 주요 band가 있어서 쉽게 구분되었으나 돌피와 물피의 단백질 패턴이 유사하여 구분이 쉽지 않았다.

  • PDF

A Direct Method to Derive All Generators of Solutions era Matrix Equation in a Petri Net - Extended Fourier-Motzkin Method -

  • Takata, Maki;Matsumoto, Tadashi;Moro, Seiichiro
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2002년도 ITC-CSCC -1
    • /
    • pp.490-493
    • /
    • 2002
  • In this paper, the old Fourier-Motzkin method (abbreviated as the old FH method from now on) is first modified to the form which can derive all minimal vectors as well as all minimal support vectors of nonnegative integer homogeneous solutions (i.e., T-invariants) for a matrix equation $Ax=b=0^{m{\times}1}$, $A\epsilonZ^{m{\times}n}$ and $b\epsilonZ^{m{\times}1}$, of a given Petri net, where the old FM method is a well-known and direct method that can obtain at least all minimal support solutions for $Ax=0^{m{\times}1}$ from the incidence matrix . $A\epsilonZ^{m{\times}n}$, Secondly, for $Ax=b\ne0^{m{\times}n}$ a new extended FM method is given; i.e., all nonnegative integer minimal vectors which contain all minimal support vectors of not only homogeneous but also inhomogeneous solutions are systematically obtained by applying the above modified FH method to the augmented incidence matrix $\tilde{A}$ =〔A,-b〕$\epsilon$ $Z^{m{\times}(n+1)}$ s.t. $\tilde{A}\tilde{x}$ = 0^{m{\times}1}$ However, note that for this extended FM method we need some criteria to obtain a minimal vector as well as a minimal support vector from both of nonnegative integer homogeneous and inhomogeneous solutions for Ax=b. Then those criteria are also discussed and given in this paper.

  • PDF

해양사고 예보 시스템 개발(I): 해양사고 수량화 D/B구축과 분석 (Development of Marine Casualty Forecasting System (I). Construction and Analysis of Marine Casualty Numerical D/B)

  • 임정빈
    • 한국항해항만학회지
    • /
    • 제27권4호
    • /
    • pp.359-366
    • /
    • 2003
  • 이 논문은 대한민국 해양사고 예보 시스템 (K-MACFOS)을 개발하기 위한 해양사고 수량화 D/B (N-D/B) 구성과 분석에 관하여 기술하였다. K-MACFOS의 주목표는 일기예보와 같이 해양사고의 예측건수와 위험수준을 방송하기 위한 것이다. 해양사고 데이터는 1990년부터 2000년까지 1년간 위도 33oN∼35oN와 경도 124oE∼127oE의 대한민국 서남해안 일대에서 발생한 총 724건을 수집하였고, 14가지 수량화변환 척도를 이용하여 양적 데이터로 변환하였다. 컬러 콘도-맵 가시화를 이용한 통계분석을 통하여 N-D/B의 유효성과 연구대상 해역의 사고특징을 검토하였다. 또한, 올바른 N-D/B 분석과 정확한 해양사고 건수 예측을 위한 최적 적용기간 선정 방법을 제안하였다.

배전급 피뢰기용 ZnO 바리스터 소자의 미세구조 및 서지 특성에 관한 연구 (A Study on the microstructure and Surge Characteristics of ZnO varistors for distribution Arrester)

  • 김석수;조한구;박태곤;박춘현;정세영;김병규
    • 한국전기전자재료학회논문지
    • /
    • 제15권2호
    • /
    • pp.190-197
    • /
    • 2002
  • In this thesis, ZnO varistors with various formulation, such as A∼E, were fabricated according to ceramic fabrication method. The microstructure, electrical properties, and surge characteristics of ZnO varistors were investigated according to ZnO varistors with various formulation. In the microstructure, A∼E\`s ZnO varistor ceramics sintered at 1130$\^{C}$ was consisted of ZnO grain(ZnO), spinel phase (Zn$\_$2.33/Sb$\_$0.67/O$\_$4/), Bi-rich phase(Bi$_2$O$_3$) and intergranuler phase, wholly. Lightning impulse residual voltage of A, B, C and E\`s ZnO varistors suited standard characteristics, below 12kV at current of 5kA. On the contrary, D\`s ZnO varistor exhibited high residual voltage as high reference voltage. In the accelerated aging test, leakage current and watt loss of B, C and D\`s ZnO varistors increases abruptly with stress time under the first a.c. stress(115$\^{C}$/3.213kV/300h). Consequently, C varistor exhibited a thermal run away. On the contrary, leakage current and watt loss of A and C\`s ZnO varistors which show low initial leakage current exhibited constant characteristics. After high current impulse test, A\`s ZnO varistor has broken the side of varistor but impulse current flowed. On the contrary, E\`s ZnO Varistor exhibited good discharge characteristics which the appearance of varistor was not wrong such as puncture, flashover, creaking and other significant damage. After long duration impulse current test, E\`s ZnO varistor exhibited good discharge characteristics which the appearance of varistor was not wrong such as puncture, flashover, creaking and other significant damage. After high current impulse test and long duration impulse current test, E\`s ZnO varistor exhibited very good characteristics which variation rate of residual voltage is 1.4% before and after test.

EFFECT OF TEMPERATURE ON FLUORESCENCE QUENCHING BY STEADY STATE AND TRANSIENT METHODS IN SOME ORGANIC LIQUID SCINTILLATORS

  • Giraddi, T.P.;Kadadevarmath, J.S.;Chikkur, G.C.;Rath, M.C.;Mukherjee, T.
    • Journal of Photoscience
    • /
    • 제4권3호
    • /
    • pp.97-103
    • /
    • 1997
  • The effect of temperature on the fluorescence quenching of 2-(4-Methoxyphenyl)-5-(1-naphthyl)-1,3,4-oxadiazole (MPNO1), 2-(4-Methoxyphenyl)-5-(2-naphthyl)-1,3,4-oxadiazote(MPNO2), by aniline, and 2-Phenylindole (2-PI) by CCk, in toluene by steady state method and in benzene by time-resolved method have been carried out in the temperature range 30 - 70$\circ$C. The Stem-Volmer (S-V) plots, I$_0$/I against quencher concentration [Q] at different temperanares show positive deviations. The fluorescence lifetimes determined at different temperatures show no systematic variations and the variations being within the experimental error, the average values of lifetimes $ $\tau$ (t) are taken for further calculations. Rate constants such as Stem-Volmer quenching constants K$_sv}$, quenching rate parameters k$_q$ and k'$_q$, static quenching constant V and kinetic distance r are determined using the modified Stem-Volmer equation and sphere of action static quenching model. In order to see whether the reactions are diffusion limited, equations k$_q$ = e$^{-Eq/RT}$ and k'$_q$ = e$^{-Eq/RT}$ are used to determine the values of E$_q$ and E'$_q$, the activation energies for collisional quenching and the values of E$_q$ are 14.53. 17.28 and 16.20 kJ mole$^{-1}$ for MPNO1, MPNO2 and 2-PI respectively and the values of E'$_q$ are 14.62 and 17.73 for MPNO1 and MPNO2 respectively. From the magnitudes of various quantities it has been concluded that the reactions are diffusion limited and the observed positive deviations in the S-V plot are due to static and dynamic quenching.

  • PDF

Influence of Composition of Layer Layout on Bending and Compression Strength Performance of Larix Cross-Laminated Timber (CLT)

  • Da-Bin SONG;Keon-Ho KIM
    • Journal of the Korean Wood Science and Technology
    • /
    • 제51권4호
    • /
    • pp.239-252
    • /
    • 2023
  • In this study, bending and compression strength tests were performed to investigate effect of composition of layer layout of Larix cross-laminated timber (CLT) on mechanical properties. The Larix CLT consists of five laminae, and specimens were classified into four types according to grade and composition of layer. The layer's layout were composited as follows 1) cross-laminating layers in major and minor direction (Type A), and 2) cross-laminating external layer in major direction and internal layer applied grade of layer in minor direction (Type B). E12 and E16 were used as grades of lamina for major direction layer of Type A and external layer of Type B according to KS F 3020. In results of the bending test of CLT using same grade layer according to layer composition, the modulus of elasticity (MOE) of Type B was higher than Type A. In case of prediction of bending MOE of Larix CLT, the experimental MOE was higher than 1.00 to 1.09 times for Shear analogy method and 1.14 to 1.25 times for Gamma method. Therefore, it is recommended to predict the bending MOE for Larix CLT by shear analogy method. Compression strength of CLT in accordance with layer composition was measured to be 2% and 9% higher for Type A using E12 and E16 layers than Type B, respectively. In failure mode of Type A, progress direction of failure generated under compression load was confirmed to transfer from major layer to minor layer by rolling shear or bonding line failure due to the middle lamina in major direction.