• Proceedings of the KIEE Conference
• /
• 2004.05a
• /
• pp.68-70
• /
• 2004

In this paper we develop an adaptive interface between video compression and transission protocols to handle QoS fluctuations that are common to mobile communication systems. We consider various generic design alternatives for QoS adaptation and identify 'QoS negotiation' as the most promissing. This method gives the best possibilities to obtain system-wide efficiency. To handle the indued system complexity we apply a design philosophy (called ARC) that separates implementation dependencies by introducing QoS interfaces between system modules. In the ARC phlosophy the implementation details are hidden in the subsystems. To assure efficient adaptation, the QoS must be negotiated between modules. We select the QoS parameters that are both necessary and sufficient for efficient negotiation between the video encoder and protocol modules. We describe the relation between the QoS parameters at the interface and the internal parameters of common video coding methods and protocol elements. Furthermore, we describe a negotiation procedure that allows a system-wide optimum to emerge.

• Journal of Korean Neurosurgical Society
• /
• v.64 no.5
• /
• pp.784-790
• /
• 2021

Objective : The purpose of this study was to investigate the correlations among various radiological parameters used to determine cervical alignment from cervical spine radiographs (X-CS) and cervical spine computed tomography (CT-CS), both within and between modalities. Methods : This study included 168 patients (≤60 years old) without a definite whole spine deformity who underwent CT-CS and X-CS. We measured occipital slope (O-s), C1 slope, C2 slope, C7 slope, sella turcica - C7 sagittal vertical axis (StC7-SVA), spino-cranial angle, T1 slope, and C27-SVA. We calculated the O-C2 angle, O-C7 angle, and C2-7 angle from the measured parameters and conducted correlation analyses among multiple parameters. Results : The intrinsic correlation features among multiple cervical parameters were very similar for both X-CS and CT-CS. The two SVA parameters (C27-SVA and StC7-SVA) were mainly influenced by the upper cervical slope parameters (r=|0.13-0.74|) rather than the lower slope cervical parameters (r=|0.08-0.13|). The correlation between X-CS and CT-CS for each radiological parameter was statistically significant (r=0.26-0.44) except for O-s (r=0.10) and StC7-SVA (r=0.11). Conclusion : The correlation patterns within X-CS and CT-CS were very similar in this study. The correlation between X-ray and CT was statistically significant for most radiological parameters, and the correlation score increased when the horizontal gaze was consistently maintained. The lower cervical parameters were not statistically associated with translation-related parameters (C2-7 SVA and StC7-SVA). Therefore, the upper cervical segment may be a better predictor for determining head and neck translation.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.38 no.5
• /
• pp.125-139
• /
• 1996

This study was performed to provide the design method for soil structure which guarantees proper safety with uncertainty of soil parameters. For this purpose, the effect of uncertainty of soil parameters for slope stability was analyzed by Bishop's simplified method and Monte Carlo simulation(MC). And reliability analysis program, RESFEM, was developed by combining elastic theory, MC, FEM, SFEM, and reliability, which can consider uncertainty of soil parameters. For factor of safety(FS) 1.0 and 1.2 by Bishop's simplified method, the probability of failure(Pf) was analyzed with varying coefficient of variation(c.o.v.) of soil parameters. The Pf increased as c.o.v. of soil parameters increased. This implies that FS is not the absolute index of slope safety, and even if FS is same, it has different Pf according to c.o.v. of soil parameters. The RESFEM was able to express the Pf at each element in slope quantitatively according to uncertainty of soil parameters. The variation of Pf with uncertainty of soil parameters was analyzed by RESFEM, and it was shown that the Pf increased as the c.o.v. of soil parameters increased.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.107-111
• /
• 2009

The parameters in the Horton's model which has well known as typical infiltration model were determined by the use of the optimization technique. It was assumed the initial infiltration capacity in this model was related to the antecedent precipitation per 10 days with linear combination. And both the parameters of the ultimate infiltration capacity and the decay factor were determined uniquely on a basin. Thus the optimal model's parameters representative to a basin were obtained and the Horton's infiltration equations by rainstorm events were determined. The data of ten rainstorm events for this study were observed at the Jeonjeokbigyo station located at the Selmacheon experimental basin that was $8.5\;km^2$ wide in the Imjin river.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2067-2070
• /
• 2005

This paper presents an approach to evaluate the appropriate parameters for Piezoelectric ceramic utilization by adopting Impedance Method. Butterworth Van Dyke model (BVD) is considered to use as an equivalent circuit of Piezoelectric ceramic in case of no load. The experimental results from this model will be compared with the results from a circular Piezoelectric ceramic with 4.8 cm. diameter and 3 mm. thickness. The Thickness Mode vibration measured by Impedance Analyzer model 4192A can be analyzed from 1Hz to 13MHz for calculating and analyzing parameters at resonance frequency and anti-resonance frequency. These parameters are evaluated to design the efficient circuit for Piezoelectric ceramic utilization to obtain the optimal efficiency.

• PNF and Movement
• /
• v.19 no.3
• /
• pp.435-440
• /
• 2021

Purpose: The purpose of this study is to investigate the effects of older adult's head-turn gait on gait parameters by comparing with head oriented forward gait and to provide criteria for their risk of falling compared to young adult. Methods: The subjects were 19 young adults in their 20s and 18 older adults in their 60s or above residing in Daegu or Gyeongsangbuk-do. To evaluate their gait parameters, spatiotemporal gait parameters were measured using a gait analysis tool (Legsys, BioSensics, USA) under two conditions: 1) walking while keeping one's eyes forward and 2) walking while turning the head. The measurement for each test was performed after one practice session, and the mean value of three measurements was analyzed. The collected data were statistically processed using a two-way analysis of variance (ANOVA) to compare any differences in gait parameters between the two groups under the two conditions. The statistical significance level was set at α=0.05. Results: According to the comparison of gait parameters in young adult and older adult between the head oriented forward gait and head-turn gait, statistically significant differences were observed in two parameters: stride length according to the height ratio and stride speed obtained by dividing the stride length according to the height ratio by time (p<0.05). Conclusion: The results of this study indicate that the head-turn gait causes greater differences in stride length and speed among older adult than in young adult and therefore can act as a cause of falling.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.10
• /
• pp.2903-2908
• /
• 2010

Protein S-nitrosation is common in cells under nitrosative stress. In order to model proteins with S-nitrosocysteine (CysSNO) residues, we first developed an Amber force field for S-nitrosoethanethiol (EtSNO) and then transferred it to CysSNO. Partial atomic charges for EtSNO and CysSNO were obtained by a restrained electrostatic potential approach to be compatible with the Amber-99 force field. The force field parameters for bonds and angles in EtSNO were obtained from a generalized Amber force field (GAFF) by running the Antechamber module of the Amber software package. The GAFF parameters for the CC-SN and CS-NO dihedrals were not accurate and thus determined anew. The CC-SN and CS-NO torsional energy profiles of EtSNO were calculated quantum mechanically at the level of B3LYP/cc-pVTZ//HF/6-$31G^*$. Torsional force constants were obtained by fitting the theoretical torsional energies with those obtained from molecular mechanics energy minimization. These parameters for EtSNO reproduced, to a reasonable accuracy, the corresponding torsional energy profiles of the capped tripeptide ACE-CysSNO-NME as well as their structures obtained from quantum mechanical geometry optimization. A molecular dynamics simulation of myoglobin with a CysSNO residue produced a well-behaved trajectory demonstrating that the parameters may be used in modeling other S-nitrosated proteins.

• The Bulletin of The Korean Astronomical Society
• /
• v.45 no.1
• /
• pp.33.3-34
• /
• 2020

The Milky Way (MW) and other systems including M31 and Cen A have flattened structures of their satellites (Disk of Satellites, DoS). Such structures are rare in simulations under the ΛCDM paradigm. DoS is known to depend mainly on 1) the alignment of satellite orbits and 2) the degree of central concentration of satellites. In this work, we examine quantitatively how these two parameters affect the flatness of a system. We find that the MW-like DoS is rare in IllustrisTNG100 simulation because its two parameters are out of the 1-s range and furthermore the MW has a structure more flattened than the other systems having similar parameters. Besides, we propose a new criterion for the MW-like systems superseding the conventional ones such as major-minor axis ratio of the MW's DoS with a value of 0.183. Each satellite system has a specific orbital combination and thus has a particular distribution of its parameters (and thus flatness). The median of the distribution is set as the representative value of each system. And the representative value of the MW can be used as a new criterion for classifying the MW-like DoS. We reconstruct the orbital combination of the observed MW satellites using GAIA DR2 data and find the systems in the simulation that have representative values similar to the new criterion from the reconstructed MW system. This allows us a new interpretation on the rarity of MW-like DoS in cosmological simulations.

• Phonetics and Speech Sciences
• /
• v.5 no.4
• /
• pp.3-15
• /
• 2013

The acoustic analysis of diadochokinesis(DDK) has been used to evaluate dysarthria. However, there has not been an automatic method to evaluate dysarthria. The aim of this study was to introduce a new automated program to measure DDK tasks and to apply this to clinical patients with idiopathic Parkinson's disease(IPD). Fourty-seven patients with IPD and a healthy control group of twenty participants were selected with every DDK task recorded three times. Twenty-five acoustic parameters in the program were developed. The relevant parameters were times of DDK, pitch related parameters, intensity parameters which were analyzed by 2-way ANOVA. Significant differences between the groups were found in the times of DDK, pitch related parameters, and intensity parameters. The findings indicated that the pitch of control group was more stable than that of the IPD. Even though the patients with IPD had a higher intensity value, this phenomenon was caused by the weakness of the IPD group who could not control their speech with a breath.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.38 no.2
• /
• pp.133-144
• /
• 1996

To get accurate results, the realistic stress-strain relationships of soils are dependent on a number of factors such as soil types, density, stress levels and stress path. Such attempts are continuously being made by the developement of analytical models for soils incorporating all such factors. Isotropic compression-expansion test and a series of drained conventional triaxial tests with several stress path for Baekma river sand were performed to investigate parameters characteristics of Lade's single work hardening model dependant on the stress path. Using the computer program based on the regression analysis, the values of parameters for the model were determined. In conclusion, the parameters of Lade's model are little influenced by the stress paths. Though yield criterion parameters ( h, ${\alpha}$a) are much influenced by stress level and stress path, the parameters don't have influence on stress-strain behavior.