• 유체기계공업학회:학술대회논문집
• /
• 2001.11a
• /
• pp.143-148
• /
• 2001

In this study, to investigate the effect of the generalized performance curve on the performance prediction and to find the optimal ones, a systematic study is performed. For this purpose, we compared the influence of the stage performance curves with experimental data in multi-stage axial compressors. As a result, it is discovered that the optimal generalized performance curves vary according to the number of the stages in compressors. And we found that for a low-stage compressors, Muir's pressure coefficient curve gives the best prediction results at design rotational frequency regardless of the efficiency curve. On the other hand, for high-stage compressors, Stone's pressure coefficient curve gives the optimistic results about the performance prediction at design rotational frequency.

• Journal of The Korean Association For Science Education
• /
• v.35 no.1
• /
• pp.121-130
• /
• 2015

Identifying students' achievement level and reflecting it on educational policy making or instructional improvement by analyzing the results of nationwide standardized assessment is an integral part of accountability in education. On the basis of this premise, we analyzed the characteristics of National Assessment of Educational Achievement (NAEA) items for middle school science subject conducted from 2010 to 2013 by using the option response rate distribution curve, the fittest graph estimated from the response rate of correct/incorrect options by achievement score. Furthermore, we classified the type of option response rate curve in terms of correct and incorrect options. Results of the analysis of option response curve showed that five types of correct option response curve (S-shaped, J-shaped, straight-shaped, F-shaped, and step-shaped) and 4 types of incorrect option response curve (down-slope, flat, mound, and up-slope) were identified. The most common type of items was the combination of S-shaped correct option response curve and down-slope incorrect option response curve, which are considered as appropriate items to discriminate the students according to achievement level. Moreover, correct option response was found to be correlated with incorrect option response. Based on the results, we also discussed some implications on teaching-learning method and classroom assessment in science education.

• Communications of the Korean Mathematical Society
• /
• v.17 no.4
• /
• pp.741-754
• /
• 2002

In this paper we present an error bound for cubic spline approximation of conic section curve. We compare it to the error bound proposed by Floater [1]. The error estimating function proposed in this paper is sharper than Floater's at the mid-point of parameter, which means the overall error bound is sharper than Floater's if the estimating function has the maximum at the midpoint.

• Journal of Astronomy and Space Sciences
• /
• v.17 no.2
• /
• pp.181-188
• /
• 2000

DO Cas is a short period (P=0.68day) eclipsing binary star and is classified as a near-contact binary by Shaw(1990). There is no published radial velocity curve for this short period binary after Mannino(1958). Hill(1991) suspected that Mannino's radial velocity curve had some serious mistake. So, we scanned the original plates used by Mannino with PDS and the spectra were employed to IRAF packages to estimate the radial velocities. The radial velocity curve and the BVR light curves made by us in 1998 were analyzed simultaneously with Wilson-Devinney code. We found that DO Cas is a contact or near-contact binary which the primary component fills its Roche lobe and we also estimated the absolute dimensions of each components of this system.

• Korean Journal of Digital Imaging in Medicine
• /
• v.17 no.1
• /
• pp.9-12
• /
• 2015

임상용 모니터의 출력값 중 가장 큰 영향을 주는 것이 휘도이다. 최근 컬러 모니터의 임상용 사용으로 인해 출력값의 보정은 매우 중요하게 관리되고 있다. 색보정 변위의 특성화가 휘도와 동일한 인자로 영향을 주는지 분석하기 위해 사용된 특성화 보정 모델은 GOG모델과 S-curve모델 이다. 두 개의 모델을 통해 모니터의 휘도는 장치의 출력과 직접적인 관계가 있다는 것을 증명하고 동일한 출력에 입력값을 가질 수 있도록 구성하고자 한다. 동일한 출력을 디스플레이 할 경우 동일한 출력값을 얻어야 한다. 그러나 모니터에 따라 서로 다른 출력값을 산출한다. 컬러모니터의 경우는 출력의 안정성에 휘도뿐만 아니라, 색감(R,G,B) 변화가 큰 역할을 수행한다. 본 연구에서는 분석인자 중 대조도에 영향을 주는 인자를 역추적하여 특성화 보정 S-curve모델을 LCD에 적용하였다. 이는 GOG모델을 적용한 CRT와 동일한 결과를 얻었다. 따라서 인자는 CIEXYZ의 결과값과 동일한 인자를 구할 수 있다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.123-124
• /
• 2015

The project participants make use of floats for their benefits. The owner may consume floats in an event of issuing change order(s) and may avoid the risk factors attributed by them; the contractor may reduce activities' costs by substituting the activity with alternative construction method and by leveling the resources, hence consuming floats. There are a lot of disputes and claims involved in the float ownership issue. The ownership of floats should be stipulated in the contract stage. To alleviate these disputes and claims, it is commendable to develop a computational method that quantifies the float value. This paper presents the method that computes the values of total floats which changes over the project life span. The system calculates CPM, compute the ratio of area of banana curve which is enclosed by earliest start curve and latest start-curve.

• Journal of Food Hygiene and Safety
• /
• v.26 no.2
• /
• pp.114-119
• /
• 2011

In this study, two duplex real-time PCR approach with melting curve analysis is presented for the detection of Escherichia coli O157:H7, Listeria monocytogenes, Salmonella spp. and Staphylococcus aureus, which are important food-borne bacterial pathogens usually present in fresh and/or minimally processed vegetables. Reaction conditions were adjusted for the simultaneous amplification and detection of specific fragments in the ${\beta}$-glucuronidase (uidA, E. coli), thermonuclease (nuc, S. aureus), hemolycin (hly, L. monocytogenes) and tetrathionate reductase (ttr, Salmonella spp.) genes. Melting curve analysis using a SYBR Green I real-time PCR approach showed characteristic $T_m$ values demonstrating the specific and efficient amplification of the four pathogens; $80.6{\pm}0.9^{\circ}C$, $86.9{\pm}0.5^{\circ}C$, $80.4{\pm}0.6^{\circ}C$ and $88.1{\pm}0.11^{\circ}C$ for S. aureus, E. coli O157:H7, L. monocytogenes and Salmonella spp., respectively. For all the pathogens, the two duplex, real-time PCR was equally sensitive to uniplex real-time PCR, using same amounts of purified DNA, and allowed detection of 10 genome equivalents. When our established duplex real-time PCR assay was applied to artificially inoculated fresh lettuce, the detection limit was $10^3$ CFU/g for each of these pathogens without enrichment. The results from this study showed that the developed duplex real-time PCR with melting curve analysis is promising as a rapid and cost-effective test method for improving food safety.

• Wind and Structures
• /
• v.22 no.1
• /
• pp.65-87
• /
• 2016

The wind velocity profile over the height of a structure in high intensity wind (HIW) events, such as downbursts, differs from that associated with atmospheric boundary layer (ABL) winds. Current design codes for lattice transmission structures contain only limited advice on the treatment of HIW effects, and structural design is carried out using wind load profiles and response factors derived for ABL winds. The present study assesses the load-deformation curve (capacity curve) of a transmission tower under modeled downburst wind loading, and compares it with that obtained for an ABL wind loading profile. The analysis considers nonlinear inelastic response under simulated downburst wind fields. The capacity curve is represented using the relationship between the base shear and the maximum tip displacement. The results indicate that the capacity curve remains relatively consistent between different downburst scenarios and an ABL loading profile. The use of the capacity curve avoids the difficulty associated with defining a reference wind speed and corresponding wind profile that are adequate and applicable for downburst and ABL winds, thereby allowing a direct comparison of response under synoptic and downburst events. Uncertainty propagation analysis is carried out to evaluate the tower capacity by considering the uncertainty in material properties and geometric variables. The results indicated the coefficient of variation of the tower capacity is small compared to those associated with extreme wind speeds.

• Geotechnical Engineering
• /
• v.2 no.2
• /
• pp.37-46
• /
• 1986

The analysis of laterally loaded piles in sand Is presented through the finite element algorithm using p-y curve. The soil modulus are found iteratively where the reaction in the Winkler model is coincided with that in the f-y curve. Through the finite element algorthm, the direct considevation for the dependent effect of all other depths to a particular depth is possible. Pile head deflection and rotation are computed by this method and compared with field experimental data of statically loaded piles at the Kwang-yang steel mill construction site. The results of this method are compared with the field experimental date of statically loaded piles tested at the Kwang-yang steel mill construction site.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.683-686
• /
• 2008

Flood damage has been increased due to the abnormal climate and extreme rainfall. So, quantitative and qualitative hydrologic data should be improved in oder to enhance accuracy of hydrologic forecast. However, research regarding hydrologic data have not been thorough enough. Therefore, in this study, monte carlo simulation was applied to rainfall runoff model to improve the reliability of runoff analysis and risk analysis. Rainfall-Stage-Discharge curve was developed as a consequence of MCS and it is possible to get correct rating curve for high water level.