• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1313-1314
• /
• 2007

This paper presents organic thin-film transistors (OTFTs) with poly(3-hexylthiophene)(P3HT) semiconductor and several polymeric dielectric materials of poly(vinyl phenol)(PVP), poly(vinyl alcohol)(PVA), and polyimide(PI) by using soluble process. The fabricated OTFT's have inverted staggered structure using transmission line method(TLM) pattern. In order to evaluate the electrical characteristics of the OTFT, capacitance-voltage(C-V) and current-voltage(I-V) were measured. C-V graphs were measured at several frequencies of 100 Hz, 1 kHz, and 1 MHz and ID-VDS graphs according to $V_{GS}$. The current on/off ratio and threshold voltage with each of PVP, PVA, and PI based OTFTs were measured to $10^3$, and -0.36, -0.41, and -0.62 V. Also, the calculated mobility with each of PVP, PVA, and PI was 0.097, 0.095, and 0.028 $cm^{2}V^{-1}s^{-1}$, respectively. In the cases of PVP and PVA, the hole mobility of P3HT was in excellent agreement with the published value of 0.1 $cm^{2}V^{-1}s^{-1}$.

• 한국중재학회지:중재연구
• /
• 제19권3호
• /
• pp.161-178
• /
• 2009

This article focuses on the enforceability of arbitration agreements m the dispute of standby letter of credit, especially with the case analysis of the leading case from the U.S. Bankruptcy Court. In Nova Hut a.s. v. Kaiser Group International Inc. case, while the underlying contract contained an arbitration clause, a guarantee to assure contractor's performance did not contain an arbitration clause. Nova Hut drew on the standby for the Contractor's failure to deliver contractual obligations. Against the Kaiser's action under US Bankruptcy law, Nova Hut moved to stay the proceedings pending arbitration, to compel arbitration, and to dismiss the complaint. The US Bankruptcy Court for the District of Delaware denied Nova Hut's motions. On appeal, Kaiser argued that it was not subject to arbitration since it was not a party to the contract. It also argued that Nova Hut had waived its right to arbitration by filing a proof of claim in the bankruptcy proceeding and commencing legal actions in other countries. The appeals court noted that in order to avoid arbitration on those grounds prejudice must be shown. It indicated that because there was no long delay in requesting arbitration and no discovery conducted m the course of litigation, the Kaiser could not demonstrate actual prejudice on the part of Owner. In light of public policy favoring arbitration, the nature of the claims in the parties' agreements, Kaiser's conduct in embracing the agreements, and their expectation of benefit, the appeals court ruled that the doctrine of equitable estoppel applied in requiring the Parent to arbitrate.

• Computers and Concrete
• /
• 제20권2호
• /
• pp.229-246
• /
• 2017

The dynamic bending response of single walled carbon nanotube reinforced composite (SWCNTRC) plates subjected to hygro-thermo-mechanical loading are investigated in this paper. The mechanical load is considered as wind pressure for dynamic bending responses of SWCNTRC plate. The dynamic version of the High Order shear deformation Theory (HSDT) for a composite plate with Matrix and SWCNTRC plate is first formulated. Distribution of fibers through the thickness of the SWCNTRC plate could be uniform or functionally graded (FG). The dynamic displacement response is predicted by using Nemarck integration method. The effective material properties of SWCNTRC are estimated by using micromechanics based modeling approach. The effect of different environmental condition, volume fraction of SWCNT, Width-to-thickness ratio, wind pressure, different SWCNTRC-FG plates, boundary condition, E1/E2 ratio, different temperature on dynamic displacement response is investigated. The dynamic displacement response is compared with the available literature and it shows good agreement.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.205-208
• /
• 2008

The wind load on building surface is numerically investigated. The geometry of target building is a square cross section and aspect ratio (height (H) to width (d)) is 6. On building surface, the pressure was measured, compared to obtained value from numerical simulation. The numerical simulations were done using URANS with three different turbulence models such as v2-f model, k-${\omega}$model, and k-${\varepsilon}$ model, respectively. The v2-f model showed the best agreement with experimental data in simulating mean pressure coefficients on front, rear and side surface. But unsteady characteristics of pressure history measured on surface is shown a discrepancy between experiment and numerical simulation.

• Nuclear Engineering and Technology
• /
• 제20권3호
• /
• pp.197-202
• /
• 1988

장기 용출율을 예측하기 위하여 유한 격판 근사 방법이 개발되었다. 이 방법은 폐기물 고화체에서의 방사성 동위원소 확산 특성이 고화체 형태에 관련되지 않고 체적/면적비 (V/S)와 확산계수에만 의존한다는 가정에 근거하고 있다. 결과적으로 용출율은 동일 체적/면적비를 갖는 유한 격판을 기술하는 방정식의 해로 표시할 수 있다. 유한 격판 근사 방법을 사용한 계산 결과는 유한 원통과 유한 구형에 관한 확산 해석에 관한 해와 비교되었다. 여기서 도출된 단순 모델은 다른 모델과의 비교 결과 잘 일치하고 있고 방사성 핵종의 용출 현상에 관한 장기 예측에 전반적인 응용이 가능한 것을 보여준다.

• Structural Engineering and Mechanics
• /
• 제20권2호
• /
• pp.209-223
• /
• 2005

A new method for deriving analytical solution of the annular elastic plate on elastic foundation under axisymmetric loading is presented. The formulation is based on application of Hankel integral transforms and Bessel functions' properties in the corresponding boundary-value problem. A representative example is studied and the obtained solution is compared with published numerical results indicating excellent agreement.

• 한국중재학회지:중재연구
• /
• 제25권4호
• /
• pp.3-23
• /
• 2015

The Chevron saga including Chevron/TexPet v. Ecuador, PCA Case No. 34877(hereinafter referred to as "Chevron I") and Chevron/TexPet v. Ecuador, PCA Case No. 2009-23(hereinafter referred to as "Chevron II") started out of domestic litigations between TexPet and Ecuador in the early 1990s. In Chevron I, the Tribunal decided that Article 2(7) of the U.S.-Ecuador BIT on effective means of provision was breached because of undue delays in the seven legal proceedings TexPet had brought against Ecuador in respect to contractual obligations. In Chevron II, it was contended that through the actions and inactions of the judiciary and the executive, Ecuador breached her several obligations under the BIT. Ecuador objected to the jurisdiction of the Tribunal because TexPet's investment was terminated in 1992, and because Chevron is not a party to the 1995 Settlement Agreement and 1998 Final Release. In its Interim Award on Jurisdiction and Admissibility, the Tribunal applied a prima facie standard to the facts alleged by the Claimants but denied by the Respondent, and decided that questions in respect of the Respondent's jurisdictional objections should be joined to the merits under Article 21(4) of the UNCITRAL Arbitration Rules. In the merits phase of Chevron II, the Tribunal divided the merits of the Parties' dispute into two parts, entitled "Track 1" and "Track 2". In its Partial Award on Track 1, the Tribunal decided that Chevron is a "Releasee" under the 1995 Settlement Agreement. In a decision on "Track 1B", the Tribunal decided that the Lago Agrio complaint cannot be read as pleading "exclusively" or "only" diffuse claims, and that, to this extent, the Claimants' reliance on the 1995 Settlement Agreement as a complete bar to the Lago Agrio complaint must fail, as a matter of Ecuadorian law. The Tribunal maintained the position that the Parties' disputes on both merit and jurisdiction should be reserved for Track 2. It remains to be seen how the Tribunal addresses the Claimants' allegations of multiple denials of justice under international law against the judgments of the Respondent's Courts, together with the Respondent's jurisdictional objections in Track 2 of the arbitration.

• 한국자동차공학회논문집
• /
• 제6권3호
• /
• pp.123-137
• /
• 1998

The finite deformation with self contact problem of C. V. joint boots is analysed by using the implicit finite element code ABAQUS/Standard. It is shown that analysis results have a good agreement with experimental ones to the degree of maximum rotation angle. As an application of design modification, the effects of thickness change of the rounded part of boot model on the bending and the contact situation of deformed geometry are investigated. In this paper, the effect of the design modification in the end on the leakage is examined using 2-D finite element simulation. To solve the leakage problem of grease, the length of the small end is enlarged. From this study, it is confirmed that we can save the cost and time by applying FEM techniques to analyze and design the boot model.

• KSBB Journal
• /
• 제9권1호
• /
• pp.40-47
• /
• 1994

Fructosyltransferase와 glucose oxidase의 혼합효소계를 이용한 고순도 fructo-oligosaccharides 생산반응에서의 수학적 모델을 제안하고 실험적으로 검증한 결과 실험치와 모델 값이 서로 잘 일치하였다. 혼합 효소계에서 두 효소의 kinetic parameters를 구한 결과, fructosyltransferase 단일 효소계에서의 값들에 비해 $K_m$ 값들은 감소하였고, $K_m,\;V_{max}$값들은 증가하였다. 혼합 효소계의 반응메카니즘은 전체적으로 Michaelis-Menten kinetics로 표현할 수 있었고, 제안된 모델을 이용하여 고순도 fructo-oligosaccharides 생산에 이상적인 설탕농도를 예측할 수 있었다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권8호
• /
• pp.477-486
• /
• 2000

This paper presents Pspice modeling methods for spark gaps and ZnO varistors and describes the application for the two-stage surge suppression circuit which was composed of the nonlinear components. The simulation modelings of nonlinear components were conducted on the basis of the voltage and current curves measured by the impulse current with the time-to-crest of $1~50 \mus$ and the impulse voltage with the rate of the time-to-crest of 10, 100 and 1000 V/\mus$. The firing voltages of the spark gap increased with increasing the rate of the time-to-crest of impulse voltage and the measured data were in good agreement with the simulated data. The I-V curves of the ZnO varistor were measured by applying the impulse currents of which time-to-crests range from 1 to $50 \mus$ and peak amplitudes from 10 A to 2 kA. The simulation modeling was based on the I-V curves replotted by taking away the inductive effects of the test circuit and leads. The meximum difference between the measured and calculated data was of the order of 3%. Also the two-stage surge suppression circuit made of the spark gap and the ZnO varistor was investigated with the impulse voltage of $10/1000\mus$$mutextrm{s}$ wave shape. The overall agreement between the theoretical and experimental results seems to be acceptable. As a consequence, it was known that the proposed simulation techniques could effectively be used to design the surge suppression circuits combined with nonlinear components.