Browse > Article
http://dx.doi.org/10.12989/cac.2017.20.2.229

Dynamic bending response of SWCNT reinforced composite plates subjected to hygro-thermo-mechanical loading  

Chavan, Shivaji G. (Department of Mechanical Engineering, S.V.N.I.T)
Lal, Achchhe (Department of Mechanical Engineering, S.V.N.I.T)
Publication Information
Computers and Concrete / v.20, no.2, 2017 , pp. 229-246 More about this Journal
Abstract
The dynamic bending response of single walled carbon nanotube reinforced composite (SWCNTRC) plates subjected to hygro-thermo-mechanical loading are investigated in this paper. The mechanical load is considered as wind pressure for dynamic bending responses of SWCNTRC plate. The dynamic version of the High Order shear deformation Theory (HSDT) for a composite plate with Matrix and SWCNTRC plate is first formulated. Distribution of fibers through the thickness of the SWCNTRC plate could be uniform or functionally graded (FG). The dynamic displacement response is predicted by using Nemarck integration method. The effective material properties of SWCNTRC are estimated by using micromechanics based modeling approach. The effect of different environmental condition, volume fraction of SWCNT, Width-to-thickness ratio, wind pressure, different SWCNTRC-FG plates, boundary condition, E1/E2 ratio, different temperature on dynamic displacement response is investigated. The dynamic displacement response is compared with the available literature and it shows good agreement.
Keywords
dynamic analysis; SWCNTRC-FG plate; HSDT; hygro-thermo-mechanical load; micromechanics; newmark integration method;
Citations & Related Records
Times Cited By KSCI : 19  (Citation Analysis)
연도 인용수 순위
1 Bounouara, F., Benrahou, K.H., Belkorissat, I. and Tounsi, A. (2016), "A nonlocal zeroth-order shear deformation theory for free vibration of functionally graded nanoscale plates resting on elastic foundation", Steel Compos. Struct., 20(2), 227-249.   DOI
2 Bourada, F., Amara, K. and Tounsi, A. (2016), "Buckling analysis of isotropic and orthotropic plates using a novel four variable refined plate theory", Steel Compos. Struct., 21(6), 1287-1306.   DOI
3 Bourada, M., Kaci, A., Houari, M.S.A. and Tounsi, A. (2015), "A new simple shear and normal deformations theory for functionally graded beams", Steel Compos. Struct., 18(2), 409-423.   DOI
4 Bousahla, A.A., Houari, M.S.A., Tounsi, A. and Adda Bedia, E.A. (2014), "A novel higher order shear and normal deformation theory based on neutral surface position for bending analysis of advanced composite plates", J. Comput. Meth., 11(6), 1350082.   DOI
5 Chavan, S.G. and Lal, A. (2017), "Bending analysis of laminated SWCNT Reinforced functionally graded plate Using FEM", Curv. Lay. Struct., 4(1), 133-144.
6 Chen, W.Q. and Lee, K.Y. (2005), "State-space approach for statics and dynamics of angle-ply laminated cylindrical panels in cylindrical bending", J. Mech. Sci., 47, 374-387.   DOI
7 Chikh, A., Tounsi, A., Hebali, H. and Mahmoud, S.R. (2017), "Thermal buckling analysis of cross-ply laminated plates using a simplified HSDT", Smart Struct. Syst., 19(3), 289-297.   DOI
8 Shao, D., Hu, F., Wang, Q., Fuzhen, P. and Hu, S. (2016), "Transient response analysis of cross-ply composite laminated rectangular plates with general boundary restraints by the method of reverberation ray matrix", Compos. Struct., 152, 168-182.   DOI
9 Gadade, A.M., Lal, A. and Shing, B.N. (2016), "Acurate stochastic initial and finial faluare of laminated plates subjected to hygrothermo-mechanival loadings using puck's failure criteria", J. Mech. Sci., 114,177-206.   DOI
10 Ebrahimi, F. and Habibi, S. (2017), "Nonlinear eccentric lowvelocity impact response of polymer-CNT-fiber multiscale nanocomposite plate resting on elastic foundations in hygrothermal environments", Mech. Adv. Mater. Struct., 1-14.
11 Girhammar, U.A., Pan Dan, H. and Gustafsson, A. (2009), "Exact dynamic analysis of composite beams with partial interaction", J. Mech. Sci., 51, 565-582.   DOI
12 Habib, H., Tounsi, A., Houari, M.S.A., Bessaim, A. and Bedia, E.A.A. (2014), "A new quasi-3D hyperbolic shear deformation theory for the static and free vibration analysis of functionally graded plates", ASCE J. Eng. Mech., 140, 374-383.   DOI
13 Kamarian, S., Bodaghi, M., Pourasghar, A. and Talebi, S. (2016), "Vibrational behavior of non-uniform piezoelectric sandwich beams made of CNT-reinforced polymer nanocomposite by considering the agglomeration effect of CNTs", Polym. Compos., 1-10.
14 Hamidi, A., Houari, M.S.A., Mahmoud, S.R. and Tounsi, A. (2015), "A sinusoidal plate theory with 5-unknowns and stretching effect for thermo-mechanical bending of functionally graded sandwich plates", Steel Compos. Struct., 18(1), 235-253.   DOI
15 Houari, M.S.A., Tounsi, A., Bessaim, A. and Mahmoud, S.R. (2016), "A new simple three-unknown sinusoidal shear deformation theory for functionally graded plates", Steel Compos. Struct., 22(2), 257-276.   DOI
16 Kamarian, S., Shakeri, M., Yas, M.H., Bodaghi, M. and Pourasghar, A. (2017), "Free vibration analysis of functionally graded nanocomposite sandwich beams resting on pasternak foundation by considering the agglomeration effect of CNTs", J. Sandw. Struct. Mater., 1-34.
17 Liew, K.M., He, X.Q., Tan, M.J. and Lim, H.K. (2004), "Dynamic analysis of laminated composite plates with piezoelectric sensor/actuator patches using the FSDT mesh-free method", J. Mech. Sci., 46, 411-431.   DOI
18 Khatibinia, M., Feizbakhsh, A., Mohseni, E. and Ranjbar, M.M. (2016), "Modeling mechanical strength of self-compacting mortar containing nanoparticles using wavelet-based support vector machine", Comput. Concrete, 18(6), 1065-1082.   DOI
19 Larbi, C.F., Kaci, A., Houari, M.S.A., Tounsi, A., Anwar, B.O. and Mahmoud, S.R. (2015), "Bending and buckling analyses of functionally graded material (FGM) size-dependent nanoscale beams including the thickness stretching effect", Steel Compos. Struct., 18(2), 425-442.   DOI
20 Lei, Z.X., Zhang, L.W. and Liew, K.M. (2015), "Elastodynamic analysis of carbon nanotube-reinforced functionally graded plates", J. Mech. Sci., 99, 208-217.   DOI
21 Liew, K.M., Lee, Y.Y., Ng, T.Y. and Zhao, X. (2007), "Dynamic stability analysis of composite laminated cylindrical panels via the mesh-free kp-Ritz method", J. Mech. Sci., 49, 1156-1165.   DOI
22 Mahi, A., Adda Bedia, E.A. and Tounsi, A. (2015), "A new hyperbolic shear deformation theory for bending and free vibration analysis of isotropic, functionally graded, sandwich and laminated composite plates", Appl. Math. Model., 39, 2489-2508.   DOI
23 Nan, Li, Mabrouk, B.T., Zoheir, A. and Kamel, K. (2016), "A dynamic analysis approach for identifying the elastic properties of unstitched and stitched composite plates", Compos. Struct., 152, 959-968.   DOI
24 Patel, S.N., Datta, P.K. and Sheikh, A.H. (2007), "Dynamic instability analysis of stiffened shell panels subjected to partial edge loading along the edges", J. Mech. Sci., 49, 1309-1324.   DOI
25 Reddy, J.N. (1982), "On the solution to force motions of rectangular composite plates", J. Appl. Mech., 49, 403-408.   DOI
26 Kumar, R., Ramachandra, L.S. and Banerjee, B. (2015), "Dynamic instability of damped composite skew plates under non-uniform in-plane periodic loading", J. Mech. Sci., 103, 74-88.   DOI
27 Ravi, K.L., Datta, P.K. and Prabhakara, D.L. (2003), "Dynamic instability characteristics of laminated composite plates subjected to partial follower edge load with damping", J. Mech. Sci., 45, 1429-1448.   DOI
28 Reddy, J.N. (2003), Mechanics of Laminated Composite Plates and Shells: Theory and Analysis, CRC Press.
29 Salami, S.J. (2016), Dynamic Extended high Order Sandwich Panel Theory for Transient Response of Sandwich Beams with Carbon Nanotube Reinforced Face Sheets, Aerospace Science and Technology.
30 Santiuste C., Sanchez-Saez, S., Barbero, E. (2008), "Dynamic analysis of bending-torsion coupled composite beams using the flexibility influence function method", J. Mech. Sci., 50, 1611-1618.   DOI
31 Shariq, M., Abbas, H. and Prasad, J. (2017), "Effect of GGBFS on time dependant deflection of Rc beam", Comput. Concrete, 19(1), 51-58.   DOI
32 Al-Basyouni, K.S., Tounsi, A. and Mahmoud, S.R. (2015), "Size dependent bending and vibration analysis of functionally graded micro beams based on modified couple stress theory and neutral surface position", Compos. Struct., 125, 621-630.   DOI
33 Ahouel, M., Houari, M.S.A., Adda Bedia, E.A. and Tounsi, A. (2016), "Size-dependent mechanical behavior of functionally graded trigonometric shear deformable nanobeams including neutral surface position concept", Steel Compos. Struct., 20(5) 963-981..   DOI
34 Ait Amar Meziane et al (2014), "An efficient and simple refined theory for buckling and free vibration of exponentially graded sandwich plates under various boundary conditions", J. Sandw. Struct. Mater., 16(3), 293-318.   DOI
35 Ait Yahia, S., Ait Atmane, H., Houari, M.S.A. and Tounsi, A. (2015), "Wave propagation in functionally graded plates with porosities using various higher-order shear deformation plate theories", Struct. Eng. Mech., 53(6), 1143-1165.   DOI
36 Amen, A. and Jean Pierre, M. (2006), "A layered approach to the non-linear static and dynamic analysis of rectangular reinforced concrete slabs", J. Mech. Sci., 48(3), 294-306.   DOI
37 Asadi, H., Bodaghi, M., Shakeri, M. and Aghdam, M.M. (2014), "Nonlinear dynamics of SMA-fiber-reinforced composite beams subjected to a primary/secondary-resonance excitation", Acta Mech., 226(2), 437-455.   DOI
38 Belabed, Z., Houari, M.S.A., Tounsi, A., Mahmoud, S.R. and Anwar Beg, O. (2014), "An efficient and simple higher order shear and normal deformation theory for functionally graded material (FGM) plates", Compos.: Part B, 60, 274-283.   DOI
39 Tounsi, A., Houari, M.S.A. and Bessaim, A. (2016), "A new 3-unknowns non-polynomial plate theory for buckling and vibration of functionally graded sandwich plate", Struct. Eng. Mech., 60(4), 547-565.   DOI
40 Tagrara, S.H., Benachour, A., Bachir Bouiadjra, M. and Tounsi, A. (2015), "On bending, buckling and vibration responses of functionally graded carbon nanotube-reinforced composite beams", Steel Compos. Struct., 19(5), 1259-1277.   DOI
41 Tounsi, A., Houari, M.S.A., Benyoucef, S. and Adda Bedia, E.A. (2013), "A refined trigonometric shear deformation theory for thermoelastic bending of functionally graded sandwich plates", Aerosp. Sci. Technol., 24, 209-220.   DOI
42 Benahmed, A., Houari, M.S.A., Benyoucef, S., Belakhdar, K. and Tounsi, A. (2017), "A novel quasi-3D hyperbolic shear deformation theory for functionally graded thick rectangular plates on elastic foundation", Geomech. Eng., 12(1), 9-34.   DOI
43 Beldjelili, Y., Tounsi, A. and Mahmoud, S.R. (2016), "Hygrothermo-mechanical bending of S-FGM plates resting on variable elastic foundations using a four-variable trigonometric plate theory", Smart Struct. Syst., 18(4), 755-786.   DOI
44 Zemri, A., Houari, M.S.A., Bousahla, A.A. and Tounsi, A. (2015), "A mechanical response of functionally graded nanoscale beam: An assessment of a refined nonlocal shear deformation theory beam theory", Struct. Eng. Mech., 54(4), 693-710.   DOI
45 Zhang, W., Lu, S.F. and Yang, X.D. (2013), "Analysis on nonlinear dynamics of a deploying composite laminated cantilever plate", Nonlinear Dynam., 76, 69-93.
46 Zhen, X.W. and Shen, H.S. (2012), "Nonlinear dynamic response of nanotube-reinforced composite plates resting on elastic foundations in thermal environments", Nonlinear Dynam., 70(1), 735-754.   DOI
47 Zidi, M., Tounsi, A., Houari, M.S.A. and Beg, O.A. (2014), "Bending analysis of FGM plates under hygro-thermomechanical loading using a four variable refined plate theory", Aerosp. Sci. Technol., 34, 24-34.   DOI
48 Wang, Z.X. and Shen, H.S. (2012), "Nonlinear vibration and bending of sandwich plates with nanobube reinforced composite face sheets", Compos. Part-B, 43, 411-421.   DOI
49 Belkorissat, I., Houari, M.S.A., Tounsi, A., Adda Bedia, E.A. and Mahmoud, S.R. (2015), "On vibration properties of functionally graded nano-plate using a new nonlocal refined four variable model", Steel Compos. Struct., 18(4), 1063-1081.   DOI
50 Bellifa, H., Benrahou, K.H., Hadji, L., Houari, M.S.A. and Tounsi, A. (2016), "Bending and free vibration analysis of functionally graded plates using a simple shear deformation theory and the concept the neutral surface position", J. Braz. Soc. Mech. Sci. Eng., 38(1), 265-275.   DOI
51 Benguediab, S., Tounsi, A., Zidour, M. and Semmah, A. (2014), "Chirality and scale rffects on mechanical buckling properties of zigzag double-walled carbon nanotubes", Compos. Part B, 57, 21-24.   DOI
52 Bennoun, M., Houari, M.S.A. and Tounsi, A. (2016), "A novel five variable refined plate theory for vibration analysis of functionally graded sandwich plates", Mech. Adv. Mater. Struct., 23(4), 423-431.   DOI
53 Bouderba, B., Houari, M.S.A., Tounsi, A. and Mahmoud, S.R. (2016), "Thermal stability of functionally graded sandwich plates using a simple shear deformation theory", Struct. Eng. Mech., 58(3), 397-422.   DOI
54 Bodaghi, M., Damanpack, A.R., Aghdam, M.M. and Shakeri, M. (2013), "Active shape/stress control of shape memory alloy laminated beams", Compos.: Part B, 56, 889-899.
55 Bouafia, K., Kaci, A., Houri, M.S.A., Benzair, A. and Tounsi, A. (2017), "A nonlocal quasi-3D theory for bending and free flexural vibration behaviors of functionally graded nanobeams", Smart Struct. Syst., 19(2), 115-126.   DOI