• Resources Recycling
• /
• v.11 no.4
• /
• pp.44-50
• /
• 2002

Characteristics on the sulfuric acid leaching of zinc and manganese from the spent zinc-carbon battery powders obtained by cushing and magnetic separation, were investigated with the variation of sulfuric acid concentration, reaction temperature, stir-ring speed and solid/liquid ratio. The sample powders were composed of Zn metal, ZnO, $MnO_2$ and $Mn_2$$O_3$. and it was found that the selective leaching of zinc was difficult in this system. At the condition of S/L ratio 1:10, IM H$_2$$SO_4$, $60^{\circ}C$ and 200 rpm, leaching rate of Zn and Mn are 92% and 35% respectively. The concentration of Zn and Mn in the leaching solution are 19.5 g/l, 7.8 g/l and pH of that solution is 0.75. It was confirmed at reducing agent should be added to increase e leaching rate of manganese with sulfuric acid.

• Journal of the Korean Society for Heat Treatment
• /
• v.13 no.4
• /
• pp.246-252
• /
• 2000

Stellite 12 alloy-powder was overlaid on 410 stainless steel valve seat using plasma transferred arc(PTA) process. Variation of characteristic of microstructure and hardness of deposit with current(90~150 A) and preheat temperature(R.T.~$400^{\circ}C$) was investigated. Important conclusion obtained are as follows; All welding conditions used produced a sound deposit layer with no defect in single pass welding. The maximum deposit had 4.0~4.8 mm in thickness and its bead width was increased with increase of current and preheat temperature. The deposit showed hypoeutectic microstruture, which was consisting of primary cobalt dendrite and networked $M_7C_3$ type eutectic carbides. The amount of eutectic carbides was decreased and its dendritic secondary arm spacing was increased with increase of current. Hardness of the deposit was decreased with increase of current. Preheat temperature up to $400^{\circ}C$, however, showed little influence on the hardness and microstructure. The hardness was also influenced by diluted Fe content near the interface in addition to microstructure and dendritic secondary arm spacing. Hot hardness at $500^{\circ}C$ showed higher than 300 HV.

• Nuclear Engineering and Technology
• /
• v.51 no.8
• /
• pp.1983-1990
• /
• 2019

Spray deposited Molybdenum trioxide (MoO₃) thin film of thickness nearly 379 nm were irradiated with 200 MeV Ag¹⁵⁺ ion beam at different fluences (Ø) of 5 ×10¹¹, 1 × 10¹², 5 × 10¹² and 1 × 10¹³ ions/㎠. The X-ray diffraction (XRD) pattern of the pristine film confirms orthorhombic structure and the crystallinity decreased after irradiation with the fluence of 5 × 10¹¹ ions/㎠ due to irradiation induced defects and became amorphous at higher fluence. In pristine film, Raman modes at 665, 820, 996 cm^-1 belong to Mo-O stretching, 286 cm^-1 belong to Mo-O bending mode and those below 200 cm^-1 are associated with lattice modes. Raman peak intensities decreased upon irradiation and vanished completely for the ion fluence of 5 ×10¹² ions/㎠. The percentage of optical transmittance of pristine film was nearly 40%, while for irradiated films it decreased significantly. Red shift was observed for both the direct and indirect band gaps. The pristine film surface had densely packed rod like structures with relatively less porosity. Surface roughness decreased significantly after irradiation. The electrical transport properties were also studied for both the pristine and irradiated films by Hall effect. The results are discussed.

• YAKHAK HOEJI
• /
• v.49 no.3
• /
• pp.212-216
• /
• 2005

A rapid, sensitive and selective electrospray tandem mass spectrometric (ESI-LC/MS/MS) method for the quantitation of gliquidone in human plasma was developed. A bioavailability study of gliquidone tablet (30 mg gliquidone, Boehringer Ingelheim Korea Co.) was performed using the validated ESI-LC/MS/MS method. The dose of 30 mg of gliquidone (1 tablet) was orally administered to 9 healthy Korean subjects. After administration, blood was taken at 0.5, 1, 1.5, 2, 2.5, 3, 3.5, 4, 5, 7, 9, 12, 24, and 33 hour. The validation data were as follows; the standard curve was linear ($r^2$=0.999) over the concentration range of $10\~1000 ng/ml$. The coefficient of variation for intra- and inter-day assay were $8.30\~18.86$, and $2.19\~12.92\%$, respectively. The lower limit of quantification for gliquidone was 10 ng/ml. The pharmacokinetic parameters obtained were as follows; $AUC_t$ was 3861.17$\pm$1328.61 ng-hr/ml, $C_{max}$ was 831.02$\pm$227.99 ng/ml, $T_{max}$ was $2.94{\pm}0.77 hr,\;K_e$, was 0.19$\pm$0.06 1/hr, and $t_{l/2}$ was 4.47$\pm$3.52 hr. Based on the validated analytical method and pharmacokinetic parameters, a standard guideline of the bioavailability test of gliquidone dosage forms was prepared successfully and could be used for the bioequivalence test of gliquidone preparation.

• YAKHAK HOEJI
• /
• v.49 no.3
• /
• pp.225-229
• /
• 2005

A rapid, sensitive and selective tandem mass spectrometric method (LC-MS/MS) for the quantitation of nicorandil in human plasma was developed. A bioavailability study of Sigmat tablet (5 mg nicorandil, Choongwae Co.) was per-formed using the validated LC-MS/MS method. The dose of 5 fig of nicorandil (1 tablet) was orally administered to 9 healthy Korean subjects. After administration, blood was taken at 0.25, 0.5, 1, 2, 3, 4, 5, 6, 9, 12, and 24 hour. The validation data were as follows; the standard curve was linear ($r^2$=0.999) over the concentration range of $0.5\~200.0 ng/ml$. The coefficient of variation for intra- and inter-day assay were $3.55\~7.44$, and $2.17\~9.102\%$, respectively. The lower limit of quantification for nicorandil was 0.5 ng/ml. The pharmacokinetic parameters obtained were as follows; $AUC_t$ was 145.9$\pm$83.0 ng-hr/ml, Cmax was 83.8$\pm$32.2 ng/ml, $C_{max}$ was 0.42$\pm$0.13 hr, $K_e$ was 0.56$\pm$0.23 l/hr, and $t_{l/2}$ was 1.42$\pm$0.52 hr. Based on the validated analytical method and pharmacokinetic parameters, a standard guideline of the bioavailability test of nicorandil dos-age forms was prepared successfully and could be used for the bioequivalence test of nicorandil preparation.

• Journal of dental hygiene science
• /
• v.7 no.3
• /
• pp.193-196
• /
• 2007

From April 9th to May 4th 2007, making a random selection of three private dental clinics in Busan, this study investigated the fear for dental treatment for 178 adults over twenty. Using four items of General Characteristics and DFS of twenty items, the degree of fear for dental treatment was evaluated by self administrated questionnaire. The obtained results were as follows. 1. Reliability analysis of each factor in details was 0.662~0.921 in Cronbach' alpha Coefficients. For Cronbach' alpha Coefficients was over 0.6. Dental Fear Survey Scale was reliable. 2. Dental stimulus response scale of three factors appeared more fear than two factors of the rest. The fear for dental treatment was higher in wemen, older ages, high education level and high income. 3. Factor of dental stimulus response scale, avoidance of dentistry and physiologic response scale accounted for 66.1%($R^2=66.1$)of the variation in dental fear factor as a result from stepwise regression analysis.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.9
• /
• pp.157-164
• /
• 2012

Recently medical service environment, the clinical information exchange which contribute to medical safety, promotion of service quality and patient's convenience, efficiency of medical procedures and medical management is essential medical service model. But, practical exchange of clinical information which variation of information level, absence of standardization system, build of heterogeneous information systems is difficult in each medical institute. In this paper, We analyzed the related technical standardizations and the models of clinical information exchange. So, we designed the clinical information exchange system based on the ideal lazy response model which is aimed at vitalizations the exchange of clinical information under domestic law environment. In case of exchange the clinical information, we separate CDA document flow from metadata flow. As a experimental result we acquired 24% improved performance compared with existed system based on the lazy response model.

• Molecules and Cells
• /
• v.19 no.1
• /
• pp.67-73
• /
• 2005

Isoflavones are synthesized by isoflavone synthases via the phenylpropanoid pathway in legumes. We have cloned two isoflavone synthase genes, IFS1 and IFS2, from a total of 18 soybean cultivars. The amino acid residues of the proteins that differed between cultivars were dispersed over the entire coding region. However, amino acid sequence variation did not occur in conserved domains such as the ERR triad region, except that one conserved amino acid was changed in the IFS2 protein of the GS12 cultivar ($R_{374}G$) and the IFS1 proteins of the 99M06 and Soja99s65 cultivars ($A_{109}T$, $F_{105}I$). In three cultivars (99M06, 99M116, and Simheukpi), most of amino acid changes were such that the difference between the amino acid sequences of IFS1 and IFS2 was reduced. The expression profiles of three enzymes that convert naringenin to the isoflavone, genistein, chalcone isomerase (CHI), isoflavone synthase (IFS) and flavanone 3-hydroxylase (F3H) were examined. In general, IFS mRNA was more abundant in etiolated seedlings than mature plants whereas the levels of CHI and F3H mRNAs were similar in the two stages. During seed development, IFS was expressed a little later than CHI and F3H but expression of these three genes was barely detectable, if at all, during later seed hardening. In addition, we found that the levels of CHI, F3H, and IFS mRNAs were under circadian control. We also showed that IFS was induced by wounding and by application of methyl jasmonate to etiolated soybean seedlings.

• The Journal of the Korea Contents Association
• /
• v.13 no.7
• /
• pp.9-15
• /
• 2013

In the VnR (Virtual and Real Worlds) of recent virtual reality convergence, the modelling of realistic human face is focused on the facial appearance such as the shape of facial parts and muscle movement. However, the facial changing parameters caused by environmental factors beyond the facial appearance factors can be regarded as important ones in terms of effectively representing virtual avatar. Therefore, this study evaluates user's visual feeling response according to the opacity variation of eye reflection of virtual avatar which is considered as a new parameter for reprenting realistic avatar. Experimental result showed that more clear eye reflection induced more realistic visual feeling of subjects. This result can be regarded as a basis for designing realistic virtual avatar by supporting a new visual realistic representing factor (eye reflection) and its degree of representation (reflectance ratio).

• Microbiology and Biotechnology Letters
• /
• v.42 no.3
• /
• pp.238-248
• /
• 2014

The metalloid arsenic (Z = 33) is considered to be a significant potential threat to human health due to its ubiquity and toxicity, even in rural regions. In this study a rural region contaminated with arsenic, located at longitude $85^{\circ}$ 32'E and latitude $25^{\circ}$ 11'N, was initially examined. Arsenic tolerant bacteria from the rhizosphere of Amaranthas viridis were found and identified as Bacillus licheniformis through 16S rRNA gene sequencing. The potential for the uptake and removal of arsenic at 3, 6 and 9 mM [As(V)], and 2, 4 and 6 mM [As(III)], and for the reduction of the above concentrations of As(V) to As(III) by the Bacillus licheniformis were then assessed. The minimal inhibitory concentrations (MIC) for As(V) and As(III) was determined to be 10 and 7 mM, respectively. At 3 mM 100% As(V) was uptaken by the bacteria with the liberation of 42% As(III) into the medium, whereas at 6 mM As(V), 76% AS(V) was removed from the media and 56% was reduced to As(III). At 2 mM As(III), the bacteria consumed 100%, whereas at 6 mM, the As(III) consumption was only 40%. The role of pH was significant for the speciation, availability and toxicity of the arsenic, which was measured as the variation in growth, uptake and content of cell protein. Both As(V) and As(III) were most toxic at around a neutral pH, whereas both acidic and basic pH favored growth, but at variable levels. Contrary to many reports, the total cell protein content in the bacteria was enhanced by both As(V) and As(III) stress.