• Journal of Animal Science and Technology
• /
• 제60권5호
• /
• pp.13.1-13.7
• /
• 2018

Background: The objective of this study was to underline that litter size as a key trait of sows needs new parameters to be evaluated and to target an individual optimum. Large individual variation in litter size affects both production and piglet's survival and health negatively. Therefore, two new traits were suggested and analyzed. Two data sets on 5509 purebred German Landrace sows and 3926 Large White and crossing sows including at least two parental generations and at least five parities were subjected to variance components analysis. Results: The new traits for evaluating litter size were derived from the individual numbers of total born piglets (TBP) per parity: In most cases, sows reach their maximum litter size in their fourth parity. Therefore, data from at least five parities were included. The first observable maximum and minimum of TBP, and the individual variation expressed by the range were targeted. Maximum of TBP being an observable trait in pig breeding and management yielded clearly higher heritability estimates ($h^2{\sim}0.3$) than those estimates predominantly reported so far. Maximum TBP gets closer to the genetic capacity for litter size than other litter traits. Minimum of TBP is positively correlated with the range of TBP ($r_p=0.48$, $r_g$ > 0.6). The correlation between maximum of TBP and its individually reached frequency was negative in both data sets ($r_p=-0.28$ and - 0.22, respectively). Estimated heritability coefficients for the range of TBP comprised a span of $h^2=0.06$ to 0.10. Conclusion: An optimum both for maximum and range of total born piglets in selecting sows is a way contributing to homogenous litters in order to improving the animal-related conditions both for piglets' welfare and economic management in pig.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 F
• /
• pp.1966-1968
• /
• 1998

This paper describes a gate drive circuit for series connected IGBTs in high voltage applications. The proposed control criterion of the gate circuit is to actively limit the voltages during switching transients, while minimizing switching transient and losses. In order to achieve the control criterion, an analog closed loop control scheme is adopted. The performance of gate drive circuit is examined experimentally by the series connection of three IGBTs with conventional snubber circuits. The experimental results show the voltage balancing by an active control under wide variation in loads and imbalance conditions.

• Animal Systematics, Evolution and Diversity
• /
• 제38권4호
• /
• pp.274-278
• /
• 2022

One marine ciliate, Diophrys quadrinucleata Zhang et al., 2020 was newly recorded from South Korea in this study. We provided morphological diagnosis and images of the Korean D. quadrinucleata population. We determined the small subunit ribosomal DNA (SSU rDNA) and cytochrome oxidase subunit I (CO1) sequence data of D. quadrinucleata, and then the sequences were compared with other Diophrys species. Intra-specific variation between the Korean and type (Chinese) populations was identical in the SSU rDNA, while the inter-specific variations between seven Diophrys species were 0.3-3.8% in the SSU rDNA and 12.6-18.2% in the CO1. In this study, we obtained 18S and CO1 data from species with identified morphology. As the importance of securing 18S and CO1 based on morphology increases in current studies, this study will contribute to ciliate studies.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 추계학술대회 논문집
• /
• pp.51-55
• /
• 2003

In this paper, the authors propose a new high performance Built-in Type spindle motor drive using vector-controlled technique at 15,000 r/min. Control method is changed by variation of motor speed in a conventional Built-in type spindle drive. In the drive system to be presented, the conventional vector control is used in the low-speed range, and the vector control without encoder is used in the high-speed range. Furthermore, in order to drive the motor from 0 to 15,000 rpm smoothly, the vector control with encoder in the low-speed range (from 0 to 8,000 rpm) is utilized and the vector control without encoder in the high-speed range (from 8,000 to 15,000 rpm) is utilized. This paper describes problem of control method in conventional spindle drive and proposes control method as variation of motor speed

• Journal of Microbiology and Biotechnology
• /
• 제14권4호
• /
• pp.816-821
• /
• 2004

A reliable molecular phylogenetic method to identify Hericium erinaceum, the most industrially valuable species in the Hericium genus, was established. Sequencing and phylogenetic analyses of the PCR-amplified ITS and 5.8S rDNA from Hericium fungi, including 6 species and 23 isolates, showed that variation in nucleotide sequences and size exists in both ITS1 and ITS2 regions, but not in the 5.8S region. These two ITS regions provided different levels of information on the relationship of H. erinaceum to other Hericium species. Based on the ITS1 sequence, both the parsimony and neighbor joining trees clearly distinguished Asian H. erinaceum isolates from other Hericium species and isolates. The intraspecific divergence of the ITS2 region was suitable to dissect the Asian H. erinaceum isolates into a few groups.

• 소성∙가공
• /
• 제15권2호
• /
• pp.132-137
• /
• 2006

This paper is concerned with the thermo-mechanical behavior including temperature dependent strain-rate sensitivity of steel sheet for an auto-body. In order to identify the temperature dependent strain-rate sensitivity of SPRC35R and SPRC45E, uniaxial tension tests are performed with the variation of the strain-rates from 0.001 /sec to 200 /sec at environmental temperatures varied from $-40^{\circ}C\;to\;200^{\circ}C$. The thermo-mechanical response at the quasi-static state is obtained with the static tensile test and at the intermediate strain-rate is from the high speed tensile test. Experimental results show that the strain-rate sensitivity increases at low temperature. It represents that as the strain-rate increases, the variation of flow stress becomes sensitive on the temperature. The results indicate that the flow stress of SPRC35R is more dependent on the changes of strain-rate and temperature than those of SPRC45E.

• 열처리공학회지
• /
• 제8권1호
• /
• pp.65-74
• /
• 1995

This research was performed to investigate the effect of ageing on grain refinement of 82wt%Cu-13.5wt%Al-4.5wt%Ni-0.1wt% misch metal alloy with ageing temperature and time. The results obtained in this study are as follows; The variation of transformation temperature with ageing temperature had very influence on ageing time at $300^{\circ}C$. But it had not influence on ageing time at $100^{\circ}C$. The variation of transformation temperature after second reversed transformation cycle was not occured in martensitic phase ageing, but $M_s$ point was appeared equally with third reversed transformation cycle in parent phase ageing. The variation of $M_s$ point was not nearly with ageing time at $100^{\circ}C$ ageing temperature. But it was decreasing with ageing time at $300^{\circ}C$ ageing temperature and $A_s$ point was increasing with ageing time. Structure of parent phase ageing was being M18R martensitic and N2H martensitic phase. It was found that ${\alpha}$ and ${\gamma}_2$ phase were created by ageing of long time at $300^{\circ}C$ ageing temperature.

• 한국자기학회지
• /
• 제5권5호
• /
• pp.730-734
• /
• 1995

The variation of magnetic permeability and dielectric constant and their relationship with microwave absorbing properties are investigated in sintered Ni-Zn ferrite. Toroid specimens of ${(Ni_{0.5}Zn_{0.5}O)}_{1-y}{(Fe_{2}O_{3})}_{1+y}$ ferrites are prepared by conventional ceramic processing technique. The large change in magnetic permeability is observed by the variation of excess $Fe_{2}O_{3}$ in the Ni-Zn ferrites. The more the iron-excess from y=0.04 to y=0.12, the lower value of both $\mu_{r}'$ and $\mu_{r}"$ is observed. However dielectric permittivity increases with the increase of the increase of the excess $Fe_{2}O_{3}$. The control of permittivity is realized by nitrogen sintering atmosphere and excess $Fe_{2}O_{3}$ respectively.

• Steel and Composite Structures
• /
• 제38권1호
• /
• pp.33-45
• /
• 2021

The Runge-Kutta method of 6th-order has been employed in this paper to analyze the flow of Casson nanofluid along permeable exponentially stretching cylinder. The modeled PDEs are changed into nonlinear ODEs through appropriate nonlinear transformations. The aim of the paper is to investigate the effects of different parameters such as Casson fluid parameter, slip parameter, suction parameter, Prandtl number, Lewis number, Brownian motion parameter, and thermophoresis parameter, with the variation of mass concentration profile. Numerical results are attained using a renowned numerical scheme shooting technique and for the authenticity of present methodlogy, the results are verified with earlier open text.

• Journal of Microbiology and Biotechnology
• /
• 제26권10호
• /
• pp.1824-1828
• /
• 2016

AcrR, the toxic-compounds-response regulator, regulates motility in microorganisms, presumably to escape from toxic environments. In this study, the genome-wide target genes of AcrR were investigated in a ΔacrR mutant strain by microarray analysis. In the absence of AcrR, the transcription of most flagella/motility genes was highly increased. In addition, flagella formation was increased in this mutant strain. Motility assays revealed that AcrR modulates swimming motility, but not swarming.