• 한국통신학회논문지
• /
• 제28권8A호
• /
• pp.650-656
• /
• 2003

In 1995, a group of representatives from the integrated circuits and computer-aided design industries presented a industry standard bipolar model called the VBIC model. The VBIC model includes the improved Early effect, quasi-saturation, substrate parasitic, avalanche multiplication, and self-heating which are not available in the conventional SGP model. This paper applies VBIC model for SiGe HBT device and develops an accurate and efficient methodology to extract all the DC and AC parameters of the VBIC model for SiGe HBT device at room temperature. Simulated results by the extracted VBIC model parameter are compared with the measurement data and show very good agreement in both DC and s-parameters prediction.

• 대한전기학회논문지:전력기술부문A
• /
• 제51권1호
• /
• pp.7-14
• /
• 2002

In power system study, relibility assessment has been an important topic during past several decards because sudden power interruption can bring about enormous economic loss. although the size of a substation is smaller than that of generation system or transmission system, switching actions after fault(s) make reliability assessment of substation rather complex situations such as switching actions easily and permit various probability distributions in describing substation elements. Despite this ability of Monte Carlo simulation, one-parameter exponential distribution is still popular in this reliability assessment. This paper examines the characteristics of several two-parameter probability distributions, and offers new parameter decision rule based on average and variance of the target to be modelled. In case study, this paper shows the profits by using Weibull distribution which is one of two-parameter probabilistic distributions instead of exponential one.

• 대한전기학회논문지
• /
• 제45권4호
• /
• pp.590-595
• /
• 1996

The robust control technique is generally the iterative design method to determine a robust control for perturbed system with prescribed range of perturbation based on the robust stability measure. However, robot manipulator has the structured pertubation and the unstructured one. This paper proposes the robust technique for designing controller such that the trajectory of end-effector of robot manipulator tracks asymptotically the desired trajectory for all allowable variations in the manipulator's parameter. For satisfying asymptotical stability though we can not know the bound of perturbations and the parameter variations, the relation between the unknown parameter and the parameter of nominal system can be derived from Krasovskii theorem and we construct the new robust control using that relation. (author). 12 refs., 6 figs.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2084-2086
• /
• 2001

This study uses distributed parameter systems as the spatial discretization technique, modelling in lumped parameter systems, and applies orthogonal transform and the Picard's iteration method to high order partial differential equations and matrix partial differential equations. In exercising optimal control of distributed parameter systems, excellent consequences are found without using the existing decentralized control or hierarchical control method.

• 동력기계공학회지
• /
• 제15권5호
• /
• pp.72-76
• /
• 2011

In this work, the parameter optimization for thermal-sprayed Al/SiC composites have been designed by $L_9(3^4)$ orthogonal array and analysis of variance(ANOVA). Al/SiC composites were fabricated by flame spray process on steel substrate. The hardness of composites were measured using micro-vickers hardness tester, and these results were analyzed by ANOVA. The ANOVA results showed that the oxygen gas flow, powder feed rate and spray distance affect on the hardness of the Al/SiC composites. From the ANOVA results, the optimal combination of the flame spray parameters could be extracted. It was considered that experimental design using orthogonal array and ANOVA was efficient to determine optimal parameter of thermal-sprayed Al/SiC composites.

• Bulletin of the Korean Chemical Society
• /
• 제22권11호
• /
• pp.1255-1260
• /
• 2001

The expansion of two different kinds of hydrodynamic size of polymethyl methacrylate (PMMA Mw: 1.56- 2.04 ${\times}$ 106 g/mol) has been measured by dynamic light scattering and viscometry above the Flory $\theta$ temperature of the variou s solvents such as n-butyl chloride, 3-heptanone, and 4-heptanone. The expansion of PMMA chains was analyzed in terms of universal temperature parameters and also compared with previous results of polystyrene (PS) system. First it was found that simple $\tau/{\tau}c$ parameter no longer had its universality for the expansion behavior of hydrodynamic size in the chemically different linear polymer chains. However after modifying ${\tau}/{\tau}c$ parameter into $(Mw/Ro2)3}2(\tau/\tauc)$, we observed a much better universality for both PMMA and PS systems. Here Mw, Ro, $\tau[=(T-{\theta}$)/${\theta}$]$, and ${\tau}c[=({\theta}-Tc)/Tc]$ are defined as the weight average molecular weight, the unperturbed end-to-end distance, the reduced temperature and the reduced critical temperature, respectively.

• International Journal of Computer Science & Network Security
• /
• 제22권7호
• /
• pp.165-170
• /
• 2022

Lying is nuisance to all, and all liars knows it is nuisance but still keep on lying. Sometime people are in confusion how to escape from or how to detect the liar when they lie. In this research we are aiming to establish a dynamic platform to identify liar by using video analysis especially by calculating the ratio of changes in their appearance when they lie. The platform will be developed using a machine learning algorithm along with the dynamic classifier to classify the liar. For the experimental analysis the dataset to be processed in two dimensions (people lying and people tell truth). Both parameter of facial appearance will be stored for future identification. Similarly, there will be standard parameter to be built for true speaker and liar. We hope this standard parameter will be able to diagnosed a liar without a pre-captured data.

• Computers and Concrete
• /
• 제30권1호
• /
• pp.1-8
• /
• 2022

The basic purpose of the current study is to compute the numerical analysis of heat source/sink for Darcy-Forchheimer three dimensional nanofluid flow with gyrotactic microorganism by rotatable disk via porous media under the slip conditions. Due to nanoparticles, random and thermophoretic motion phenomenon occurs. The governing mathematical model is handled numerically by shooting method. Additionally, the characteristics of velocities, mass, heat, motile microorganisms and associated parameters are thoroughly analyzed via plots and tables. Different physical parameters like Forchheimer number, slip parameters like velocity, porosity parameter, Prandtl number, Brownian number, thermophoresis parameter, heat sink/source parameter, bioconvected Rayleigh number, buoyancy parameteron dimensionless velocities, temperature. Approximate values of Sherwood microorganism are analyzed.

• International Journal of Computer Science & Network Security
• /
• 제21권7호
• /
• pp.93-102
• /
• 2021

This study aimed to test method on the accuracy of estimating the items parameters and ability, using the Three Parameter Logistic. To achieve the objectives of the study, an achievement test in chemistry was constructed for third-year secondary school students in the course of "natural sciences". A descriptive approach was employed to conduct the study. The test was applied to a sample of (507) students of the third year of secondary school in the "Natural Sciences Course". The study's results revealed that the (EAP) method showed a higher degree of accuracy in the estimation of the difficulty parameter and the abilities of persons higher than the MML method. There were no statistically significant differences in the accuracy of the parameter estimation of discrimination and guessing regarding the difference of the two methods: (MML) and (EAP).

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 추계종합학술대회
• /
• pp.469-472
• /
• 2005

본 논문에서는 음석인식 시스템을 구현함에 있어서 잡음의 영향에 강인한 특성을 가지는 효과적인 음성특징 파라미터에 대해 제안한다. ASR(Automatic Speech Recognition)에 사용되는 가장 기본적인 파라미터인 MFCC와 DCT를 이용한 DCTCs를 기본적인 파라미터로 설정하였다. 또한, 음성의 변이구간에 대한 정보를 가지도록 Cepstrum을 재구성한 delta-Cepstrum, delta-delta-Cepstrum 파라미터를 제안하고, HMM을 이용하여 인식성능을 비교하였다. 그리고 각각의 파라미터의 차원을 축소하기 위해 LDA 알고리즘을 적용하고 이에 대한 인식성능을 비교하였다. 실험결과 다양한 조건의 잡은 환경에서 기존의 파라미터보다 LDA를 이용하여 차원 축소된 delta-delta-Cepstrum 파라미터가 향상된 인식성능을 나타내었다.