• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.41-44
• /
• 2001

In this paper, we explain briefly polysilicon guard layer in a simple 3-D structure. Simulation was performed extensively to see interference and characterize the role of the polysilicon guard layer. Especially, we performed extensively S-parameter simulation to analysis the signal interference. The interference was characterized in terms of oxide thickness, polysilicon doping concentration, thickness, number of contact of polysilicon guard, and metal guard size.

• Proceedings of the Safety Management and Science Conference
• /
• 2000.05a
• /
• pp.265-273
• /
• 2000

A study to analyze and solve problems of polyacetal resin cutting experiment has presented in this paper. We have taken Taguchi's parameter design approach, specifically orthogonal array, and determined the optimal levels of the selected variables through analysis of the experimental results using S/H ratio.

• Journal of applied mathematics & informatics
• /
• v.33 no.1_2
• /
• pp.203-210
• /
• 2015

We consider fractional Brownian motion and FARIMA process with Gaussian innovations and show that the suitably scaled distributions of the FARIMA processes converge to fractional Brownian motion in the sense of finite dimensional distributions. We figure out ACF function and estimate the self-similarity parameter H of FARIMA(0, d, 0) by using R/S method. Finally, we display power spectrum density of FARIMA process.

• Journal of applied mathematics & informatics
• /
• v.14 no.1_2
• /
• pp.305-317
• /
• 2004

We construct the empirical Bayes (EB)estimation of the parameter in two-side truncated distribution families with asymmetric Linex loss using negatively associated (NA) samples. The asymptotical optimality and convergence rate of the EB estimation is obtained. We will show that the convergence rate can be arbitrarily close to $O(n^{-q}),\;q\;=\;{\lambda}s(\delta\;-\;2)/\delta(s\;+\;2)$.

• Journal of the Korea Safety Management & Science
• /
• v.5 no.1
• /
• pp.103-113
• /
• 2003

A study to analyze and solve problems of a stone surface process experiment has presented in this paper. We have taken Taguchi's parameter design approach, specifically orthogonal array, and determined the optimal levels of the selected variables through analysis of the experimental results using S/N ratio.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.21 no.46
• /
• pp.221-227
• /
• 1998

A study to analyze and solve problems of rotor metal cutting experiment has presented in this paper. We have taken Taguchi's parameter design approch, specifically orthogonal array, and determined the optimal levels of the selected variables through analysis of the experimental results using S/N ratio.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.1
• /
• pp.175-181
• /
• 1999

There are issues regarding how some of traffic parameters should be set so that ATM and non-ATM service parameters can be compatible. For example, policing method used by frame relay based on CIR(committed information rate) will not exactly match the ATM UPC(Usage Parameter Control) method. ATM and the frame relay have different transfer modes and traffic parameters. The cells and frames are police by their own traffic control schemes. For the same information, the real traffic of the ATM side takes greater bandwidth than that of the frame relay side caused by ATM cell format and AAL5 format. IN both networks this bandwidth than that of the frame relay side caused by ATM cell format and AAL5 format. In both networks this bandwidth ratio should be considered on traffic parameter mapping to maintain their QoS and to perform efficient network resource management. In this paper we describe traffic parameter mapping schemes between frame relay and ATM in ATM network and how to expect the bandwidth ratio to maintain FR QoS in ATM network. We assumed frame length distribution to Erlang or Exponential probability density function.

• Journal of Digital Contents Society
• /
• v.3 no.1
• /
• pp.101-111
• /
• 2002

Lately development of network around Internet expands range of data traffic to multimedia information, and so for the guarantee of multimedia services end-to-end QoS(Quality of Service) must service because comparing with existing Internet service can not support For satisfying those QoS requirements, network have to guarantee not only network on parameter, such as delay, jitter, throughput but also system resources like CPU utilization, memory usage. Therefore it is urgent to develop QoS based middleware to distribute multimedia data and maximize network utilization in the limited resource environment. And it must be necessary of network to provide end-to-end QoS(Quality of Service) for multimedia applications. Multimedia applications want that QoS which satisfy their own service properties be guaranteed Then, We must analyze those necessary QoS requirements md define QoS parameter which specify as two viewpoint, user's and network's perspective. Therefore network provider supplying network for usual user and university, enterprise must want to find about their own network performance and problem. It is essential for network manager to want to use a tool like this. On the basis of technique about QoS test-bed in the AIM network, We studied on the method of QoS measurement and management about end-to-end connection in the Internet. We measured network status about end-to-end connection and analyze the result of performance.

• Journal of the Microelectronics and Packaging Society
• /
• v.17 no.3
• /
• pp.43-49
• /
• 2010

Direct printing technology is an attractive metallization method, which has become immerging as "Green technology" to the conventional photolithography, on account of low cost, simple process and environment-friendliness. In order to commercialize the printed electronics in industry, it is essential to evaluate the electrical properties of conductive circuits using direct printing technology. In this contribution, we focused on the electrical characteristics of inkjet-printed circuits. A Cu nanoink was inkjet-printed onto a Bisaleimide triazine(BT) substrate with parallel transmission line(PTL) and coplanar waveguide(CPW) type, then was sintered at $250^{\circ}C$ for 30 min. We calculated the resistivity of printed circuits through direct current resistance by the measurement of I-V curve: the resistivity was approximately 0.558 ${\mu}{\Omega}{\cdot}cm$ which is about 3.3 times that of bulk Cu. Cascade's probe system in the frequency range from 0 to 30 GHz were employed to measure the Scattering parameter(S-parameter) with or without a gap between the substrate and the probe station chuck. The result of measured S-parameter showed that all printed circuits had over 5 dB of return loss in the entire frequency range. In the curve of insertion loss, $S_{21}$, showed that the PTL type circuits had better transmission of radio frequency (RF) than CPW type.

• ETRI Journal
• /
• v.20 no.3
• /
• pp.251-271
• /
• 1998

It is well known that if usage parameter control/network parameter control (UPC/NPC) functions are used together with a cell loss priority control scheme in ATM networks, the measurement phasing problem can occur. This makes it difficult for a network provider to define and commit the cell loss ratio as a QoS parameter. To solve the problem, we propose a new UPC/NPC algorithm. By using the proposed UPC/NPC algorithm, we can define the cell loss ratios for CLP = 0 and CLP = 0+1 cell streams without the measurement phasing problem under any conditions. We analyzed the performance of the proposed UPC/NPC algorithm. Using a discrete time model for the UPC/NPC architecture with a discrete-time semi-Markov process (DSMP) input model, we obtained the cell discarding probabilities of CLP = 0 and CLP = 0+1 cells streams and showed that more CLP = 0 cells are accepted compared to what was proposed in ITU-T.