• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.117-117
• /
• 2016

일반적인 박막 성장용 CVD는 막 성장 시간이 짧게는 수분에서 수시간 정도 소요하기 때문에 장비에 문제가 발생 할 시 조치를 취하고 다음 현상을 개선하기에 용이 하였다. 그리고 대분분의 장비가 국산화되어 있을 만큼 많은 경험치가 축척되어 있다. 그러나 2, 4 족 화합물 성장용 CVD는 고아학 렌즈 생산용 장비로 국내에서는 아직 생소하고 공정 경험이 없는 새로운 장비이다. 2,4 족 화합물의 특징은 다음과 같다. 2,4 족 화합물은 M, N 이라는 두가 물질이 결합하여 형성한다. 2,4 족 화합물은 높은 융점과 낮은 증기압을 갖니다. 이런 물질들은 고온에서 아래와 같이 평형적으로 반응한다. $$nMN_{(s)}=nM_{(g)}+Nn_{(g)}$$ 화합물인 $MN_{(g)}$의 상태로 존재할 수 있으나 일바적으로 n=2인 4족 원소의 2원자 분자로된 기체가 지배적이다. 증기상을 이용한 성장 공정에서는 구성 원자나 분자를 만들어내는 단계, 이들을 공급원에서 기판까지 수송하는 단계, 기판 위에 흡착하는 단계, 핵의 생성과 단결정을 생성하는 단계, 필요치 않는 구성물을 제거하는 단계를 거쳐 공정이 진행 된다. 각 공정은 성장 물질에 충분한 자유도를 주어야하고 자유도를 주기 위해서는 많은 열에너지가 공급 되어야 한다. 따라서 기존의 박막 성장 공정 보다 성장 속도가 느리고 증착하는 양보다는 버리는 양이 많으며 버려지는 성장물질들은 급격한 온도 변화가 생기는 곳에서 급격히 증착하기 시작한다. 본 성장 공정이 진행되는 압력은 30 torr 부근이며 공정 온도는 $1000^{\circ}C$ 부근이다. 30 torr 영역에서는 열전달이 대기압과 같은 속도로 진행되기 때문에 지속적으로 온도에의해 손상을 받는 부위가 있을 수 있다. 높은 공정 온도와 높은 공정 압력은 내부 구조물로 발생된 열을 빠르게 장비 표면으로 수송하게 되고 그 결과 장비의 연결 부분에 장착된 오링에 손상을 주게 된다. 오링 손상을 방지 하기위해 냉각수 라인을 형성하여 오링을 보호하게 되면 열역학적 기울기가 급격히 발생하는 부분이므로 CVD의 반응 부산물들이 빠른 시간동안 증착하게 되고 막히는 현상이 발생하게 된다. 목표한 두게까지 박막을 성장시키기 위해서는 장시간 공정이 필수이며 장시간 공정을 안정적으로 가져가지 위해서는 배기 라인의 막힘 현상을 해결하여야 한다. 본 논문에서는 막힘 현상의 진행을 시간에 따라 해석하였으며 장시간 공정을 진행하기위해 필요한 요소와 기구적으로 조치가 가능한 방법에 대해 작성하였다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.7 no.4
• /
• pp.425-433
• /
• 1983

Fatigue tests by axial loading (R=0.1) were carried out to investigate fatigue crack growth properties of small surface cracks in mild steel at room temperature, 250.deg. C and 400.deg. C, by using flat specimens with a small artificial pit. All the data of the fatigue crack growth rate obtained in the present tests are determined as a function of the stress intensity factor range, so that the applicability of liner fracture mechanics to the fatigue crack growth of surface cracks at elevated temperatures is investigated and discussed in comparison with the data of type 304 stainless steel at room temperature and elevated temperature. The obtained results are as follows: 1) Relations of both surface fatigue crack length and its depth to cycle ratio fall within a narrow scatter band in spite of different stress levels. 2) The .DELTA. .sigma. .root. .pi. a-da/dN relation of surface fatigue crack growth at room temperature is independent of the stress level and can be plotted as a straight line at log-log diagram, but the relation at 400.deg. C depends partly on the stress level. 3) Relations of the fatigue crack growth into depth d(2b)/dN and is stress intensity factor range .DELTA. $K_{I}$, accounted for the aspect ratio variation, fall within a narrow scatter band for wide range of the applied stress levels. And .DELTA. $K_{I}$E-d(2b)/dN relations of mild steel at different stress level coincide relatively well with the data of type 304 stainless steel. 4) The value of aspect ratio obtained by a beach mark method and a temper coloring method approaches about 0.9 in common with crack growth and it is independent of stress level and temperatures. 5) The equi-crack length curve is parallel to S-N$_{f}$ curve at elevated temperatures.s.s.s.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.52 no.4
• /
• pp.325-338
• /
• 2016

Properties of aggregation and spatial distribution of fish were examined based on three lines in the South Sea of Korea using three frequencies (18, 38, and 120 kHz) of a scientific echosounder. The vertical distribution of fish was displayed using acoustic biomass namely nautical area scattering coefficient (NASC). As a result, at 120 kHz high NASC showed from water surface to 20 meters in deep while at 18 and 38 kHz very high NASC presented in 70 ~ 90 meters in depth, especially at line 3. Among three lines, the line 2 had lowest NASC. The horizontal distribution of fish using three frequencies together exhibited high NASC between the eastern South Sea and center of South Sea. In especial, NASC ($801{\sim}1,920m^2/n{\cdot}mile^2$) was observed along coastal waters from Busan to Tongyeong, Geoje, and Namhae. In regard with the property of aggregation of fish schools, the volume back-scattering strength ($S_V$) of three lines presented close each other, however, the range of $S_V$ in the line 2 was shortest (-53.5 ~ -43.4 dB). The average distributional depth was deep in the order of L3 ($32.8{\pm}9.0m$), L1 ($45.2{\pm}9.5m$), L2 ($49.7{\pm}5.6m$). The average altitude was high in the order of L3 ($13.4{\pm}10.3m$), L1 ($17.0{\pm}12.6m$), L2 ($56.7{\pm}5.6m$). The average length, thickness, and area were large in the order of L1, L3, and L2. This means that small sized fish schools were distributed near water surface in the line 2 while relatively large and similar sized fish aggregations between line 1 and line 3 appeared however, fish schools at line 3 had lower distributional depth and smaller compared to those at line 1. Acoustic data were visualized for demonstrating the entire circumstances of survey area. Additionally, there was no correlation between acoustic and trawl results.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.23 no.1
• /
• pp.79-88
• /
• 2020

Purpose: Management of eosinophilic esophagitis (EoE) varies from center to center. In this study, we evaluated the effectiveness of a dairy-free diet (DFD) and the 6-Food Elimination Diet (SFED) as initial therapies for the treatment of EoE in our practice. Methods: This was a retrospective study of children who had been treated for EoE at Connecticut Children's Medical Center, Hartford, CT, USA. Pre- and post-treatment endoscopy findings and histology results of patients treated with DFD or SFED were examined. Results: One hundred fifty-two patients (age 9.2±5.2 years, 76.3% male, 69.7% caucasian) met the inclusion criteria for initial treatment with DFD (n=102) or SFED (n=50). Response for DFD was 56.9% and for SFED was 52.0%. Response based on treatment duration (<10, 10-12, and >12 weeks) were 81.8%, 50.0%, and 55.1% for DFD, and 68.8%, 50.0%, and 40.0% for SFED. Response based on age (<6, 6-12, and >12 years) were 59.3%, 42.9%, and 67.5% for DFD, and 36.4%, 58.8%, and 72.7% for SFED. In patients treated with DFD, concomitant proton pump inhibitor (PPI) administration resulted in improved outcomes (p=0.0177). Bivariate regression analysis showed that PPI with diet is the only predictor of response (p=0.0491), however, there were no significant predictors on multiple regression analysis. Conclusion: DFD and SFED are effective first line therapies for EoE. DFD should be tried first before extensive elimination diets. Concomitant therapy with PPI's may be helpful.

• Progress in Superconductivity
• /
• v.14 no.2
• /
• pp.99-101
• /
• 2012

Fluorescent yield X-ray absorption fine structure (XAFS) spectroscopy is useful for analyzing local structure of specific elements in matrices. We developed an XAFS apparatus with a 100-pixel superconducting tunnel junction (STJ) detector array with a high sensitivity and a high resolution for light-element dopants in wide-gap semiconductors. An STJ detector has a pixel size of $100{\mu}m$ square, and an asymmetric layer structure of Nb(300 nm)-Al(70 nm)/AlOx/Al(70 nm)-Nb(50 nm). The 100-pixel STJ array has an effective area of $1mm^2$. The XAFS apparatus with the STJ array detector was installed in BL-11A of High Energy Accelerator Research Organization, Photon Factory (KEK PF). Fluorescent X-ray spectrum for boron nitride showed that the average energy resolution of the 100-pixels is 12 eV in full width half maximum for the N-K line, and The C-K and N-K lines are separated without peak tail overlap. We analyzed the N dopant atoms implanted into 4H-SiC substrates at a dose of 300 ppm in a 200 nm-thick surface layer. From a comparison between measured X-ray Absorption Near Edge Structure (XANES) spectra and ab initio FEFF calculations, it has been revealed that the N atoms substitute for the C site of the SiC lattice.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.1
• /
• pp.94-100
• /
• 2002

In this paper, we proposed a 3 dB coupler using N-section parallel-coupled lines and designed a very compact one based on the analysis results. The coupled line has been analyzed by spectral domain method. After we obtain the s-parameters of N-section parallel-coupled lines by using port reduction method 4-port s-parameters are derived. The 3 dB couplers, which were fabricated, are not necessary to implement high impedance lines and tight coupling gaps as Lange Couplers because loose coupling is used. To realize a minimum section, we used the PCB that has high a dielectric constant and a thickness. The experimental results show that it has wide bandwidth of about 42 %(0.5 dB unbalance) from 3.6 GHz to 5.5 GHz and phase difference within 1 degree. Also, The isolation characteristics about 15 dB at its pass-band are obtained.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.5
• /
• pp.722-726
• /
• 1996

To bring out the functional properties of Agar-agar extracted with 0.01N $H_2SO_4$ from Cellidium amansii produced in Che-ju Udo and its rheological properties were investigated. The flow behavior indexes in the range of $0.5\~5\%$ agar-agar solution were $0.62\~0.69\;at\;80^{\circ}C,\;0.46\~0.67\;at\;60^{\circ}C\;and\;0.34\~0.64\;at\;50^{\circ}C$. The consistency indexes were $0.12\~1.26\;Pa{\cdot}s^n\;at\;80^{\circ}C,\;0.12\~7.28\;Pa{\cdot}s^n\;at\;60^{\circ}C\;and\;3.9\~19952.6\;Pa{\cdot}s^n\;at\;50^{\circ}C$. Consistenry index's existence nature to concentration is two straight line relation which have different slopes on the border of $2\%$ concentration of agar-agar solution and existence nature of temperature followed Arrhenius equation. And the activation energy, in the range of $0.5\%\~5\%$ agar-agar solution, were $0.09\~13.51\;kcal/g{\cdot}mol$.

• Proceedings of the KIEE Conference
• /
• 1998.07c
• /
• pp.1137-1139
• /
• 1998

Effective database is the key to manage automatic distribution system. Currently, automatic distribution system database has been studied with a relational concept. But, it is hard to describe the characteristic of automatic distribution system data which require real time management and composite type. This paper present the way how to design conceptual schema for EMS database using object-oriented concept which is free to decribe composite data type and support inheritance concept.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.26 no.3
• /
• pp.165-172
• /
• 2023

Crohn's disease (CD) is a chronic, incurable and relapsing disease involving any part of the gastrointestinal tract and exclusive enteral nutrition (EEN) is first-line therapy. Few studies have examined the patient experience of EEN. The aim of this study was to assess the child's experiences of EEN, to identify problematic themes and understand the child's mindset. Children with CD who previously completed EEN were recruited to complete a survey. All data were analyzed using Microsoft Excel and reported as N (%). Forty-four children (mean age 11.3 years) consented to participate. Sixty-eight percent of children reported limited formula flavors as the most challenging aspect and 68% of children identified 'support' to be important. This study highlights the psychological impact of chronic disease and its therapies on children. Providing adequate support is essential to insure EEN is successful. Further studies are required to determine psychological support strategies for children taking EEN.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.7
• /
• pp.414-423
• /
• 2016

In the present study, the $CuN_x-Cu-CuN_x$ layer the partial pressure ratio Cu metal of Ar and $N_2$ gas using a DC magnetron sputtering device, was generated by the In-situ method. $CuN_x$ layer was able to obtain a surface reflectance reduction effect from the advantages of the process and the external light. $CuN_x$ layer is gas partial pressure, DC the Power, the deposition time variable transmittance in response to the thickness and partial pressure ratio, the reflectance was measured. $Ar:N_2$ gas ratio 10:10(sccm), DC power 0.35 A, was derived Deposition time 90 sec optimum conditions. Thus, according to the optimal thickness and the composition ratio was derived surface reflectance of 20.75%. In addition, to derive the value of ${\Delta}$ Ra surface roughness of 0.467. It was derived $CuN_x$ band-gap energy of about 2.2 eV. Thus, to ensure a thickness and process conditions can be absorbed to maximize the light in a wavelength band in the visible light region. As a result, the implementation of the $12k{\Omega}$ base line resistance of using the Cu metal. This is, 5 inch Metal mesh TSP(L/S: $4/270{\mu}m$) is in the range of the reference operation.