• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.581-584
• /
• 2003

The austenitic STS 304 stainless steel was turned to clarify the effects of tool geometry on the tool wear. The wear of TiN-TiCN-TiC-TiAlN coated tungsten carbide tool was the smallest, exhibiting larger wear in the order of Si-Al-O-N ceramic, TiN coated tungsten carbide, TiN-TiCN-TiN coated tungsten carbide, TiC-TiN cermet and M20 tungsten carbide tools at the same cutting conditions. The S-type tool of M20 with large approach angle showed the longest tool life of all tools used in this tests due to preventing the groove wear of the side cutting edge. The wear of the S-type tool with the rake angle of 15$^{\circ}$became smaller than with that of -5$^{\circ}$, but the tool with the nose radius of 0.8mm did not perform much better with increasing the rake angle.

• 대한화학회지
• /
• 제21권1호
• /
• pp.16-22
• /
• 1977

$CH_3COCl$의 카르보닐 탄소에서의 $Cl^-$의 2분자 치환반응을 여러 거리에서 전방 및 후방 공격할 때의 에너지 변화(EHT)와 전자분포(CNDO/2)를 계산함으로서 분자궤도론적으로 연구하였다. 다른 실험 및 MO결과들과 함께 검토하여 본 결과 이 치환반응은 $S_N2-$보존형 메카니즘을 알았다.

• 분석과학
• /
• 제36권4호
• /
• pp.161-169
• /
• 2023

In this study, a straightforward and precise nitrogen/sulphur-codoped carbon dots (N/S-CD) was produced using a microwave irradiation approach. The N/S-CD was formulated from succinic acid (SA), bis-(3-aminopropyl)-amine (BAPA), and sodium thiosulphate (STS) as sources of carbon, nitrogen, and sulphur, respectively. The synthesized N/S-CD established a valuable quantum yield (QY) of 70 % and was sensitive to aluminium ion (Al³⁺) with a detection limit of 0.21 µM and a linear concentration range of 0-100 µM. When detecting Al³⁺ in real water samples, the N/S-CD resulted in a satisfactory recovery in the range of 91.14 %-103.37 %. Thus, the proposed study is very promising for Al³⁺ detection in environmental water samples.

• 대한수학회논문집
• /
• 제25권1호
• /
• pp.119-128
• /
• 2010

Let ${X_n,\;n\geq1}$ be a sequence of independent identically distributed (i.i.d.) random variables (r.vs.), defined on a probability space ($\Omega$,A,P), and let ${N_n,\;n\geq1}$ be a sequence of positive integer-valued r.vs., defined on the same probability space ($\Omega$,A,P). Furthermore, we assume that the r.vs. $N_n$, $n\geq1$ are independent of all r.vs. $X_n$, $n\geq1$. In present paper we are interested in asymptotic behaviors of the random sum $S_{N_n}=X_1+X_2+\cdots+X_{N_n}$, $S_0=0$, where the r.vs. $N_n$, $n\geq1$ obey some defined probability laws. Since the appearance of the Robbins's results in 1948 ([8]), the random sums $S_{N_n}$ have been investigated in the theory probability and stochastic processes for quite some time (see [1], [4], [2], [3], [5]). Recently, the random sum approach is used in some applied problems of stochastic processes, stochastic modeling, random walk, queue theory, theory of network or theory of estimation (see [10], [12]). The main aim of this paper is to establish some results related to the asymptotic behaviors of the random sum $S_{N_n}$, in cases when the $N_n$, $n\geq1$ are assumed to follow concrete probability laws as Poisson, Bernoulli, binomial or geometry.

• Advances in aircraft and spacecraft science
• /
• 제3권4호
• /
• pp.471-502
• /
• 2016

This paper presents the dynamic instability analysis of un-damped elastically supported piezoelectric functionally graded (FG) beams subjected to in-plane static and dynamic periodic thermomechanical loadings with uncertain system properties. The elastic foundation model is assumed as one parameter Pasternak foundation with Winkler cubic nonlinearity. The piezoelectric FG beam is subjected to non-uniform temperature distribution with temperature dependent material properties. The Young's modulus and Poison's ratio of ceramic, metal and piezoelectric, density of respective ceramic and metal, volume fraction exponent and foundation parameters are taken as uncertain system properties. The basic nonlinear formulation of the beam is based on higher order shear deformation theory (HSDT) with von-Karman strain kinematics. The governing deterministic static and dynamic random instability equation and regions is solved by Bolotin's approach with Newmark's time integration method combined with first order perturbation technique (FOPT). Typical numerical results in terms of the mean and standard deviation of dynamic instability analysis are presented to examine the effect of slenderness ratios, volume fraction exponents, foundation parameters, amplitude ratios, temperature increments and position of piezoelectric layers by changing the random system properties. The correctness of the present stochastic model is examined by comparing the results with direct Monte Caro simulation (MCS).

• 제어로봇시스템학회논문지
• /
• 제6권2호
• /
• pp.271-271
• /
• 2000

Although inverter-driven hydraulic elevators(HEL's) have advantages over traditional valve-controlled HEL's energy efficiency and performance they need robustness in performance and stability to accomodate nonlinearities big parametric variations and resonances in mechanical-hydraulic inner system. In this paper a robust controller based on DGKF/μ mixed approach is applied to a HEL system with carring capacity of 24 persons for Incheon International Airport. The results of a test tower(T/T) has shown good ro-bustness in performance and stability of the proposed controller thereby proving a feasibility of this robust controller-based approach for other HEL problems.

• 한국시스템다이내믹스학회:학술대회논문집
• /
• 한국시스템다이내믹스학회 2002년도 추계학술대회발표논문집
• /
• pp.103-122
• /
• 2002

Construct ion sector government policies are targeted towards regulation than facilitation and management. This approach often fails to integrate different segments of the public and private and seems to be inadequate in encouraging the private sector to achieve better quality construction. This situation suggests a need for a better and systematic approach for construct ion policy making. This paper suggests a model-based approach to public policy making using system dynamics approach. Singapore government's policy making efforts to encourage the use of prefabrication are discussed as an application example. This paper presents system models which discuss strengths and weaknesses of the current construction system in Singapore using casual loops, and highlights the feedback processes that would be useful in decision making for the government. Based on these system dynamics models, this paper identifies four major potential policy interventions policy interventions.

• 산업경영시스템학회지
• /
• 제5권6호
• /
• pp.41-48
• /
• 1982

This paper analyzed md developed flow - shop sequencing heuristic method. The essence of the heuristic approach is in the application of selective routine that reduce the size of a problem. The advantages of this approach are consistency. Speed, endurance and the ability to cope with more data and larger systems than is humanly possible, In recent years many heuristic procedures have been suggested for the flow - shop sequencing problem. Although limited comparisons of these procedures have been made, a full scale test and evaluation have not been reported previously. The maximum flow - time criterion is selected as the evaluation criterion is selected as the evaluation criterion of flow - shop's efficiency. The author evaluated these 3 heuristic method's performance. By the evaluation of the result, we can see that the modified methods produce a shorter maximum flow - time than the original methods.

• International Journal of Reliability and Applications
• /
• 제7권2호
• /
• pp.141-153
• /
• 2006

In this paper, we present the U-Statistic test for testing exponentiality against new renewal better than used (NRBU) based on a goodness of fit approach. Selected critical values are tabulated for sample sizes n=5(1)30(10)50. The asymptotic Pitman relative efficiency relative to (NRBU) test given in the work of Mahmoud et all (2003) is studied. The power estimates of this test for some commonly used life distributions in reliability are also calculated. Some of real examples are given to elucidate the use of the proposed test statistic in the reliability analysis. The problem in case of right censored data is also handled.

• Journal of Welding and Joining
• /
• 제32권1호
• /
• pp.61-65
• /
• 2014

The purpose of this study is to evaluate the applicability of the element stress to establish S-N design curve for the welded lap joint with thin plates below 2mm thickness. In order to do it, the extensive fatigue tests of the welded lap joints with INVAR alloy were performed. With the results, the deign S-N curves for the lap-weld were established by using the reference stresses such as the nominal stress range at the weld throat area, hot spot stress range and element stress range, and compared with regard to the standard deviation. The standard deviation of S-N curves with element stress range was less than that of S-N curves with other reference stresses. In addition, FEA results show the amount of the element stress is less sensitive to mesh size. Based on the results, it can be concluded that the element stress is to be used as the reference stress for the design S-N curves of the welded lap joint.