• Korean Journal of Soil Science and Fertilizer
• /
• 제33권6호
• /
• pp.405-415
• /
• 2000

To determine application rate of elemental sulfur to adjust pH of alkaline soil, buffer curve method was investigated. The elemental sulfur required to control pH 8.3 to pH 6.3 by buffer curve calculation was treated in two soils of silty loam and sandy loam, and the sulfur-mixed soils were moistened with 50% of water holding capacity during incubation of 6 weeks at $30^{\circ}C$. Soil pH was lowered with incubation and reached to target point after 4 weeks of incubation, and elemental sulfur was oxidised entirely to sulfate. This means that buffer curve has the accuracy to determine sulfur application rate in alkaline soil. However it is estimated that application rate of sulfur should be carefully determined in the field scale. Excess application of elemental sulfur resulted in extremely low soil pH and caused the hinderance of lettuce growth by nutritional imbalance and ion toxicity. To simplify the determination procedure of sulfur requirement, buffer curve method by addition of 0.1N-HCl solution as unit of mL was developed, it was compared with theroutine methods which diluted $H_2SO_4$ solution and $Ca(OH)_2$ are added as cmolc per kg soil to adjust each pH step. Buffer capacities, cmolc kg $soil^{-1}$ $pH^{-1}$, calculated from two buffer curves were not significantly different. The result indicates that buffer curve method by 0.1N-HCl can be used to adjust high pH of alkaline soil.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• 제59권8호
• /
• pp.1401-1405
• /
• 2010

We have successfully demonstrated of metal-insulator-semiconductor (MIS) capacitors with $HfO_2$/p-Si structures. The $HfO_2$ film was grown at $200^{\circ}C$ on H-terminated Si wafer by atomic layer deposition (ALD) system. TEMAHf and $H_2O$ were used as the hafnium and oxygen sources. A cycle of the deposition process consisted of 0.1 s of TEMAHf pulse, 10 s of $N_2$ purge, 0.1 s of $H_2O$ pulse, and 60 s of $N_2$ purge. The 5 nm thick $HfO_2$ layer prepared on Si substrate by ALD exhibited excellent electrical properties, including low leakage currents, no mobile charges, and a good interface with Si.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• 제58권12호
• /
• pp.2420-2424
• /
• 2009

We have successfully demonstrated of metal-insulator-semiconductor (MIS) capacitors with $Al_2O_3/p-Si$ structures. The $Al_2O_3$ film was grown at $200^{\circ}C$ on H-terminated Si wafer by atomic layer deposition (ALD) system. Trimethylaluminum [$Al(CH_3)_3$, TMA] and $H_2O$ were used as the aluminum and oxygen sources. A cycle of the deposition process consisted of 0.1 s of TMA pulse, 10 s of $N_2$ purge, 0.1 s of $H_2O$ pulse, and 60 s of $N_2$ purge. The 5 nm thick $Al_2O_3$ layer prepared on Si substrate by ALD exhibited excellent electrical properties, including low leakage currents, no mobile charges, and a good interface with Si.

• Journal of Navigation and Port Research
• /
• 제47권4호
• /
• pp.220-230
• /
• 2023

Aids to Navigation (AtoN) is an important tool for safe navigation, and the variety of information provided by AtoN is invaluable. The demand for standardized AtoN information for efficient utilization is gradually increasing, and for this purpose, the International Association of Lighthouse Authorities (IALA) has developed S-201, a standard for the management of AtoN information, and recommends its application to member countries. Notably, since Korea defines AtoNs and manages the information according to the Aids to Navigation Act, the need for definition and information management according to the S-201 standard, an international standard, is even greater. Therefore, in this study, according to the recommendation of IALA, we aimed to suggest a way to manage AtoN information by applying the S-201 standard. To this end, after comparing the classification criteria of the AtoN information of the IALA, and that of Korea's classification standards, Korea's AtoN information management plan applying the S-201 standard was presented. The results of this study provide important basic data for managing standardized digital AtoN information that is easy to use worldwide.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 한국추진공학회 2008년도 제31회 추계학술대회논문집
• /
• pp.231-236
• /
• 2008

The well-defined copolymers derived from Epichlorohydrin(ECH), Tetrahydrofuran(THF) were synthesized by Cationic ring-opening polymerization(CROP) with 1,4-Butandiol, a initiator, and $BF_3THF$ Complex, a catalyst via Activated monomer mechanism, which could lead to hydroxyl-terminated polyethers. The molecular weight of polymers were dependant on the ratio of [monomer]/[diol], Copolymer structures were controlled by monomers feed ratio, ECH and THF added. This polymers were functionalized from Chlorine group to Azide group using $S_N2$ reaction. Synthesized polymers were found to be as the prepolymer for polyurethane. Polyurethane was synthesized in the presence of N-100/IPDI mixture, a curing agent, and TPB(triphenyl bismuth)/MA(Maleic anhydride) mixture, a catalyst system. The curing behavior and mechanical properties of polyurethane after mixing with various prepolymer’s composition and the molecular weight were studied.

• Journal of the Korean GEO-environmental Society
• /
• 제13권2호
• /
• pp.59-65
• /
• 2012

Solidification/Stabilization(S/S) is one of the remediation technologies that have been applied for treating inorganic hazardous wastes. This study investigated the reduction of arsenic concentration of arsenic-contaminated soil using by S/S. The binder plays a role in controlling the mobility and solubility of the contaminants in S/S process, so it is important to determine the optimum binder content. Therefore, this study evaluated the effectiveness of S/S using four different binders(cement, zero valent iron, and monosulfate and ettringite(cement-based synthesized materials) at the binder content ranged between 5%(wt.) and 20%(wt.). The leachability of arsenic in 1 N HCl was different depending on the types of binders: cement(71.41%) > monosulfate(47.45%) > ettringite(46.36%) > ZVI(33.08%) at the binder content of 20%. Additionally, three kinds of a mixture binder were prepared using cement and additives(monosulfate, ettringite, calcium sulfoaluminate(CSA)) and tested for arsenic reduction. The highest arsenic removal capacity was found at the mass ratio of cement to the additive, 4:1 in all experiments using a mixture binder, regardless of the additives types. A mixture binder(cement and additives) resulted in higher arsenic removal relative to the arsenic removal when cement was used alone.

• Proceedings of the Korean Vacuum Society Conference
• /
• 한국진공학회 1998년도 제14회 학술발표회 논문개요집
• /
• pp.94-94
• /
• 1998

최근 a-CH:N (hydrogenated amorphous carbon nitride)가 a-CH 보다 팡학적, 기계객성 질이 우수하므로 이에 대한 연구가 활발하게 진행되고 있다. 본 실험에선 원료 가스의 유량 은 5 sccm으로 고정시킨 채 원료가스내의 질소 대 메탄 혼합비 (N2ICHa)훌 O 에서 4 까지 변 화시 키 띤서 DC saddle-field PECVD (plasma enhanced chemical vapour d야Xlsition)훌 이 용하여 a-CH:N 박막융 제작하여, 가스 혼합비가 박막의 미세구조와 광학척 성질에 미치는 영향올 연구하였다. 박막 성장시 진공조 내의 압력온 throttle valve롤 사용하여 90 mTorr로 일정하게 유지하였으며 양극 전압과 기판전업은 각각 500 V, 200 V로 고청하고 상온에서 중 착하였다. a a -step으로 측정 한 a-C:H:N 박막의 두께는 혼합가스내의 질소의 양이 증가할수륙 4800 A에서 2000 A로 두께가 감소하였지만 표면 rot핑비less는 혼합가스내의 질소의 양이 중가할 수록 중가함을 AFM (atomic force mi$\alpha$'0 scopy) 으로 관찰하였다. 박막내의 C와 N의 정량 분석은 RES (Rutherford back scattering s야ctroscopy) 핵공명법을 이용하여 분석하였다. X XPS (X -ray photoelectron spec$\sigma$oscopy) 와 FT-IR (Fo삐er transform-infrared s spectrometry)로 미세구조률 측정한 결과 혼합가스내의 질소의 양이 충가할수록 C-H기는 감 소하였지 만 C르N, N-H기 는 늘어 났다. 또한 PL (photoluminescence) 측정 결과 웬료가스 내 메탄과 질소의 비율이 1:1일 때 최대의 발광올 보였고 UVS (비없 vi이et spec$\sigma$orne$\sigma$y)으 로 측정한 광학쩍 에너지 캡은 혼합비내의 질소의 양이 증가할수록 2.53 eV에서 2.3 eV로 감 소하였다. 이를 결과로부터 원료가스내의 N2ICHa의 중가에 따른 박막의 미세구조 변화와 광학척 생 질의 상관 관계가 고찰될 것이다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• 제14권1호
• /
• pp.87-95
• /
• 1990

Rotating bending fatigue tests of an authentic steel 304 were performed at various temperatures such as room temperature, $538^{\circ}$ and $593^{\circ}C$. The plastic replica method was also applied in order to estimate the fatigue life on the basis of serial observation of small fatigue crack initiation and growth on the pit specimen surface. The fatigue crack growth behavior of 304 stainless steel was investigated within the frame work of elastic-plastic fracture mechanics within a narrow scatterband in spite of different stress levels at elevated temperature as at room temperature. The growth law of small surface crack is determined uniquely by the term. $\DELTA\sigma^{n}a$ where $\DELTA\sigma$ is the stress amplitude, a is the crack length, and n is a constant. It is found that the small crack growth behavior is basically equivalent to the S-$N_{f}$ relationship, where S and $N_{f}$ are stress and number of cycles to failure, and the fatigue life prediction is in good agreement with the experimental results.

• Journal of The Korean Society For Urban Railway
• /
• 제6권4호
• /
• pp.393-399
• /
• 2018

It is well recognized that residual stresses of the rails, generated from the manufacturing process including roller straightening and heat treatment, play an important role in determining fatigue and fracture properties of the rails. Thus, it has been a challenge to measure the residual stresses accurately. In this work, contour method was employed to evaluate the residual stresses existing in interior of the rails. The cross section perpendicular to the longitudinal direction of the rail was cut at a very slow rate using electric discharge machining (EDM), after which a laser-based flexural measuring instrument enabled us to precisely measure the flection of the cross section. The measured data were converted into the residual stresses using the commercial finite element package, ABAQUS, through a user-defined element (UEL) subroutine, and the residual stresses of the new rails (50N, KR60, UIC60) with three different specifications were compared.

• Microbiology and Biotechnology Letters
• /
• 제9권1호
• /
• pp.7-19
• /
• 1981

The production of gluconic acid from glucose by the resting cell system of Aspergillus niger was studied. It was found that the conversion products from glucose by the resting cell system were markedly influenced by the pH, temperature, substrate concentration, aeration, metal ions, cultivation time and storage conditions of the resting cells. Conversion products were identified as gluconic acid by the thin layer chromatography and infrared spectrophotometry. These conversions were greatly stimulated by addition of $Mg^{++}$, and S $n^{++}$, but showed inhibitory effects by C $u^{++}$, H $g^{++}$, C $d^{++}$, A $g^{+}$ and cyanide. For the optimum cell storage, it was effective to be kept at -$25^{\circ}C$ in 0.05M phosphate buffer solution of pH 7.0. The gluconic acid production by the resting cell system was more effective than those of the fermentation with respect to cultivation time, yield, recovery and re-use of the cell.l.l.l.l.l.l.