• Journal of the Korean Society for Railway
• /
• v.11 no.1
• /
• pp.107-113
• /
• 2008

As it recently appears that LCC (Life Cycle Cost) analysis may be considered as an essential method for economic evaluation of infrastructures. Many researches have been made to assess LCC of each facility based on reasonable methods. However, expected maintenance repair cost must be reasonably estimated to enhance the reliability of LCC analysis through systematic and rational methods. This study is intended to propose a rational approach to reliability-based LCC analysis of high-speed railway steel bridges considering lifetime corrosion and fatigue damage. However in Korea, since high speed railway steel bridges are only recently constructed, no direct statistical data are available for the account of the maintenance cost and thus their maintenance characteristics are not clear yet. In this paper, for the assessment of expected maintenance/repair cost, the fatigue system reliability analysis incorporating the corrosion effect is proposed by considering the corrosion and fatigue damage using measured data of high speed railway steel bridges. A model proposed by Rahgozar, of at for fatigue notch factor considering the corrosion effect is used in order to incorporate the corrosion effect into the fatigue strength reduction and S-N curve. Finally, the effectiveness of LCC model proposed for high-speed railway steel bridges is demonstrated by a numerical example.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.3
• /
• pp.429-436
• /
• 2013

This study considers how the fatigue behavior and probabilistic properties of SAE1055 steel are related to its hardness level. SAE1055 steel was heat-treated using induction hardening. Five types of specimens were prepared (A: base material, B: through hardened material with HV390, C: through hardened material with HV510, D: through hardened material with HV700, and E: surface hardened material with HV700). Fatigue tests were performed under a stress ratio of R = -1 using a 4-point rotary bending fatigue tester. The fatigue behaviors were greatly influenced by the hardness, but the fatigue limit did not increase over a hardness of HV510. In addition, the effect of the hardness level on the failure mechanism was evaluated using a scanning electron microscope. The probabilistic properties of the fatigue life were investigated using a probabilistic S-N approach, and the effect of the hardness level on these properties was evaluated using a residue analysis.

• Journal of Bio-Environment Control
• /
• v.14 no.4
• /
• pp.269-274
• /
• 2005

The purpose of this experiment was to investigate optimal ionic concentration of nutrient solution for water culture of young welsh onion (Allium fistulosum). For the purpose of clarification of optimal nutrient concentration to maximize growth of young welsh onion, different nutrient concentrations of Yamazaki's solution for welsh onion seedling $(NO_3^--N\;9.0,\;NH_4^+-N\;3.0,\;PO_4^{3-}-P\;6.0,\;K^+7.0,\;Ca^{2+}\;2.0,\;Mg^{2+}\;2.0,\;and\;SO_4^{2-}-S\;4.4me{\cdot}L^{-1})$ which selected by prior experiment were treated as 0.6, 1.2, 1.8, and $2.4dS{\cdot}m^{-1}$. Increments of fresh weight, dry weight and top length were the highest in 1.2 and, in the next, were placed by the order of 1.8, 2.4, and $0.6dS{\cdot}m^{-1}$ The regression coefficients for the maximal growth of fresh weight of cv. 'Geurnjanguedaepa' and 'Tokyokuro' were $y=-42.091x^2+171.79x+11.047 (R^2=0.8946,\; R=0.9458^*)\;and\;y=-50.069x2+157.58x+15.414(R^2=0.9343,\;R=0.9692^{**})$, respectively, and optimal EC levels according to regression coefficients were 1.68 and $1.57dS{\cdot}m^{-1}$. As the conclusions, optimal nutrient levels far young welsh onion were $1.2dS{\cdot}m^{-1}$ EC in the early growth stage and $1.6\~l .7dS{\cdot}m^{-1}$ in the later growth stage.

• Journal of Korea Water Resources Association
• /
• v.35 no.3
• /
• pp.321-330
• /
• 2002

This study aims at the analysis of the geomorphological instantaneous unit hydrograph model (GIS-GIUH) with geographic information system for the rainfall-runoff analysis of watershed which is ungaged or doesn't have sufficient hydrologic data. The rainfall-runoff analysis was performed in Wi stream(Dongkok, Koro, Miseung, Byeungchun, Hyoreung, Museung) which is a representative experimental river basin of IHP. In the process of analysis of the GIUH model, developed GIS-GIUH model and Rosso-GIUH model were applied the study basin and computed hydrographs by these models were compared with observed hydrograph. The GiS-GIUH model shows more closely to the observed hydrograph than Rosso-GIUH model in the peak discharge of the hydrograph. For the development of the GIS-GIUH model, Gamma function factor N was given by N=3.25( $R_{B}$/ $R_{A}$)$^{0.126}$ $R_{L}$$^{-0.055}$, which is the relation of the watershed geomorphological factor, K was also obtained as K=1.50( $R_{A}$/( $R_{B}$. $R_{L}$))/$^{0.10}$.(( $L_{{\Omega}}$+ $L_{{\Omega}-1}$)/V)$^{0.37}$. As the results of analysis, it was found that GIS-GIUH model can be applied to an ungaged watersheds.eds.

• Journal of Food Hygiene and Safety
• /
• v.16 no.3
• /
• pp.188-193
• /
• 2001

To evaluate antimicrobial activities of chongkukjang slime fermented by different strains, growth characteristics were compared using various standard microorganisms with addition of chongkykjang slime. Chonghkjang slime was prepared by fermenting cooked soybean after inoculating with Bacillus circulans K-1, Baciilus spp N-1 and Bacillus subtilis CH-1, respectively. Significant antimicrobial activity was observed by chongkukjang slime on gram positive bacteria (Staphylococcus aureus, Bacillus cereus, Bacillus subtilis, Micrococcus luteus), gram negative bacteria(Escherichia coli O157:H7, Salmonella Typhimurium, Pseudomonas fluorescens), and yeast (Pichia membranaefaciens, Saccharomyces cerevisiae, Candida albicans). In case of B. cereus growth inhibition of 80% was achieved by the addition of chongkukjang slime; on the contrary, to Escherichia coli O157:H7 only 20% inhibition was observed. Slime from Bacillus subtilis CH-1, in particular, inhibition of 40% toward bacteria and yeast, whereas slime from Bacillus circulans K-1, Bacillus spp N-1 showed only 20% inhibition.

• Journal of the Korean Magnetics Society
• /
• v.18 no.4
• /
• pp.142-146
• /
• 2008

The angular dependence of the exchange bias($H_{ex}$) and coercivity($H_c$) in multilayer $[Pt/Co]_N-IrMn$ with applied measuring field rotated toward in-plane at angle $\theta$ from perpendicular-to-plane, has been measured. Multilayer films consisting of $Si/SiO_2/Ta(50)/Pt(4)/[Pt(15)/Co(t_{Co})]_N/IrMn(50)/Ta(50)(in\;{\AA})$ were prepared by magnetron sputtering under typical base pressure below $2{\times}10^{-8}$ Torr at room temperature. Magnetization measurements were performed on a vibrating sample magnetometer and extraordinary Hall voltage measurement systems after cooling from 550 K under a field of 2 kOe applied along the perpendicular to film direction. The hysteresis loop shifts from the origin not only along the field axis but also along the magnetization axis. $H_{ex}$ and $H_c$ show a $1/cos{\theta}$ and $1/|cos{\theta}|$ dependence on the angle($\theta$) between the applied measuring field and the perpendicular-film direction, respectively. This $1/cos{\theta}$ dependence can be accounted for by considering the angular dependence of strong out-of-plane magnetic anisotropy introduced during the field cooling.

• Journal of the Korean Vacuum Society
• /
• v.13 no.1
• /
• pp.9-13
• /
• 2004

Perylene is an interesting material known to have P-type and N-type characteristics at the same time. We prepared perylene thin-films in ultrahigh vacuum with two different deposition rates of 0.1 $\AA$/s and 1.0 $\AA$/s in order to study the dependence of film characteristics on the growth condition. The smaller average grain size with larger surface coverage as well as the better crystallinity were observed on the perylene film prepared under 1.0 $\AA$/s deposition rate in x-ray diffraction (XRD) and atomic force microscopy (AFM) study. For studying electrical property of the film, perylene organic thin-film transistor (OTFT) with gold contacts was fabricated on $SiO_2$/Si surface in UHV condition. The prepared perylene OTFT device shows P-type characteristic. The obtained hole mobility in the current-voltage characteristic curve was$2.23\times10^{-5}\textrm{cm}^2$/Vs.

• Journal of Radiation Protection and Research
• /
• v.11 no.1
• /
• pp.70-76
• /
• 1986

In order to establish the national standards of neutron measurements, a manganese sulphate ($MnSO_4$) bath system was developed under the IAEA technical support. This bath system was made up of a spherical s.s. 316 L bath, of 3.5 mm thick and of 125 cm internal diagmeter, filled with a manganese sulphate solution, a solution circulating system, and a $^5Mn\;{\gamma}-ray$ monitoring system. The solution pumped from the bath was introduced into a Marinelli beaker-type monitor vessel which was equipped with two seperate detectors, $3.8cm{\phi}{\times}3.8cm$ NaI(T1) crystals. The performance of the system were tested using the neutron sources, $^{241}Am-Be\;and\;^{252}Cf$, mounted at the center of the bath. From the decay curve analysis of $^{56}Mn$ activity, neutron emission rate of $^{252}Cf$ by the comparative method was obtained to be $3.71{\times}10^7\;n/s\;per\;50{mu}g$ as of November 15, 1985.

• The Journal of the Petrological Society of Korea
• /
• v.20 no.1
• /
• pp.23-37
• /
• 2011

The scaling properties on the length distribution of microcrack populations from Tertiary crystalline tuff are investigated. From the distribution charts showing length range with 15 directional angles and five groups(I~V), a systematic variation appears in the mean length with microcrack orientation. The distribution charts are distinguished by the bilaterally symmetrical pattern to nearly N-S direction. The whole domain of the length-cumulative frequency diagram for microcrack populations can be divided into three sections in terms of phases of the distribution of related curves. Especially, the linear middle section of each diagram of five groups represents a power-law distribution. The frequency ratio of linear middle sections of five groups ranges from 46.6% to 67.8%. Meanwhile, the slope of linear middle section of each group shows the order: group V($N60{\sim}90^{\circ}E$, -2.02) > group IV($N20{\sim}60^{\circ}E$, -1.55) > group I($N60{\sim}90^{\circ}W$, -1.48), group II($N10{\sim}60^{\circ}W$, -1.48) > group III($N10^{\circ}W{\sim}N20^{\circ}E$, -1.06). Five sub-populations(five groups) that closely follow the power-law length distribution show a wide range in exponents( -1.06 - -2.02). These differences in exponent among live groups emphasizes the importance of orientation effect. In addition, breaks in slope in the lower parts of the related curves represent the abrupt development of longer lengths, which is reflected in the decrease in the power-law exponent. Especially, such a distribution pattern can be seen from the diagram with $N10{\sim}20^{\circ}E,\;N10{\sim}20^{\circ}W$ and $N60{\sim}70^{\circ}W$ directional angles. These three directional angles correspond with main directions of faults developed around the study area. The distribution chart showing the individual characteristics of the length-cumulative frequency diagrams for 15 directional angles were made. By arraying above diagrams according to the categories of three groups(A, B and C), the differences in length-frequency distributions among these groups can be easily derived. The distribution chart illustrates the importance of analysing microcrack sets separately. From the related chart, the occurrence frequency of shorter microcracks shows the order: group A > group B > group C. These three types of distribution patterns could reveal important information on the processes occurred during microcrack growth.

• Journal of the Korean Magnetics Society
• /
• v.17 no.1
• /
• pp.34-37
• /
• 2007

The crystallographic and magnetic properties of $Fe_{0.9}Zn_{0.1}Cr_2S_4$ have been studied by X-ray diffractometer(XRD), vibrating sample magnetometer(VSM) and $M\"{o}ssbauer$ spectroscopy measurement. The crystal structure was determined by the normal cubic spinel of space group Fd3m and the lattice constant was $a_0=9.9967\;{\AA}$. The specific phenomenon which looks like cusp pattern at 77 K was observed in magnetization corves(ZFC : Zero Field Cooling) under 100 Oe applied field. $N\acute{e}el$ temperature($T_N$) was determined to be 153 K by VSM and $M\"{o}ssbauer$ spectra. The asymmetric 8-line profile has been observed at 4.2 K, which was attributed by the colossal electric quadupole interaction(${\Delta}E_Q$), ${\Delta}E_Q$ has 2.22 mm/s at 4.2 K. The ${\Delta}E_Q$ abruptly decreases around 77 K and then it disappears above 77 K with diminishing of 8-line pattern. The isomer shift $\delta$ at room temperature is 0.48 mm/s relative to Fe metal, which means that the charge state of Fe ions is ferrous in character.