• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.18 no.6
• /
• pp.576-584
• /
• 2009

Up to now, it has been said that no satisfactory computer solution has been found for synthesizing four-bar linkage based on the prescribed coupler link curve. In our study, an algorithm has been developed to improve the design synthesis of four bar linkage based on the 5 precision points method. The suggested algorithm generates the desired coupler curve by using NURBS, and then the generated curve approximates as closely as possible to the desired curve representing coupler link trajectory. Also, when comparing each generated curve by constructing the control polygon, rapid comparison is easily achieved by applying convex hull of the control polygon. Finally, an optimization process using ADS is incorporated into the algorithm based on the 5 precision point method to reduce the total optimization process time. As for examples, two four bar linkages were tested and the result well demonstrated the effectiveness of the algorithm.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.20 no.4
• /
• pp.93-101
• /
• 1993

The purpose of this study is to analyze th especificity of landscape construction progress in order to develop the model of landscape construction schedule management. Nine case study area in housing complex was selected and the graphic curve of the accumulative payment by landscape construction schedule was analyzed. And the results are as follows: The graphic curve of common construction progress is S-curve but that of landscape construction progress is parabolic-curve, because landscape construction concentrally progress in last period of construction schedule. And particularly parabolic-curve seems to rise up suddenly in the last period when landscape construction amount is small.

• The KIPS Transactions:PartB
• /
• v.9B no.5
• /
• pp.599-608
• /
• 2002

This paper proposes DIT (Digital Investment Trust) agent based on ECSSL (Elliptic Curve SSL). This DIT agent is a banking project using IT (Investment Trust) conception based on EC (Electronic Commerce) and can manage micro payment, account opening and account transferring. In addition, ECSSL (Elliptic Curve SSL) protocol is implemented which consists of much better encryption functions than existing SSL (Secure Socket Layer) Protocol. Therefore, This DIT agent based on ECSSL protocol protects a customer's information and asset from third party.

• Journal of the Korean Society of Costume
• /
• v.50 no.2
• /
• pp.167-182
• /
• 2000

The purpose of this study is to examine the art nouveau fashion represented in the end of the twentieth century. The characteristics of art nouveau are naturalism, medievalism , exoticism, and decadentism. The influences of art nouveau were seen in the fashion of the late nineteenth century : S-curve silhouette and organic curve motives printed on hems. Art nouveau has reappeared in modern fashion trends such as romanticism , decadence, ecology, ethno, and fusion. To sum up, art nouveau fashion at the end of the twentieth century is classified into four shapes. First, art nouveau appears in naturalism. Influenced by the arts and crafts movements and naturalistic trend, it has reappeared at the end of the twentieth century in themes like 'art & craft'. This expression technique is to objectively nature and to represented art nouveau textiles. Second, S-curve silhouette appeared at the end of nineteenth century's fashion with the art nouveau influenced rejection of the bustle style. At the end of the twentieth century, the design , emphasizing the hip, is represented in fashion collections as a phenomenon of romanticism . Especially the art nouveau silhouette of the end of the twentieth century does not represent S-curve silhouette. But , it emphasizes the hip only. Third, Art nouveau exoticism by symbolism is influenced by Chinese and Celtic art, the Middle Ages, and the exoticism that appeared in fashion at the end of the nineteenth century : harem style, kimono style, and turbans. Exoticism at the end of the twentieth century is expressed by optical flower prints and successive floral print arrangements as seen in the themes of ethno and fusion. Fourth, one of the characteristics of art nouveau, decadence is influenced by the pre-raphaelite brotherhood. This is expressed in the images of vampires, and symbolism expressing grotesque insect motives and decadent successive curves. At the end of the twentieth century decadence is represented in fashion ; grotesque insect motives, tatto looks of organic curve motives celtic hair style, see-through fashion, grotesque make-up . Besides hair style techniques, decadent expressions applying art nouveau paintings also appeared. Finally , art nouveau fashion represented as a fashion trend at the turning point to the new millennium is one of great significance as an organic, an environment-intimate and continuance-possible design in a future.

• Fire Science and Engineering
• /
• v.28 no.5
• /
• pp.44-51
• /
• 2014

In this study, the Mock-up office space experiments have been performed for the fire behavior analysis of the compartmented space used for the performance-based fire safety design of buildings. Mock-up test was conducted using the compartmented office space dimensions, which are 2.4 m wide, 3.6 m wide, and 2.4 m hight. Test was conducted with the combustible materials such as a desk, a chair, a computer ect. The fire load in the Mock-up office space was $18.74kg/m^2$. As a result, the temperature of the central compartment space to reach $600^{\circ}C$ were 394 to 408 s. The temperature of the corner near the entrance edge to reach $600^{\circ}C$ were 404 to 420 s. At this study, the temperature curve in the compartmented space has been predicted using the temperature data appling the BFD curve. The BFD curve factor based on the fire tests was determined by the maximum temperature of $900^{\circ}C$, 7 min to reach the maximum temperature, and the shape coefficient of 1.5. The initiating fire was rapidly increased to 9 min, and decreased.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.8 no.4
• /
• pp.527-536
• /
• 1996

Convective nucleate boiling and burnout heat flux have been studied on a flat, downward facing, constant heat flux surface cooled by an impinging water jet. The tests are progressed from low, nonboiling power to high, burnout heat flux power. The jet velocity and the subcooling do not affect the nucleate boiling curve of $q{\sim}{\Delta}T_{sat}$ diagram, but the supplementary water height affects the curve. For the case of dimensionless height of supplementary water S/D=1, the boiling curve shift to the heigher heat flux than that of S/D=0 or S/D=2. Burnout heat flux is enhanced with increasing jet velocity and subcooling. Also. by using the supplementary water(S/D=1 or S/D=2), burnout heat flux is larger than that of the simple water jet(S/D=0). A generalized correlation for the burnout heat flux data in the present boiling system with an impinging water jet is successfully evolved.

• Journal of Ocean Engineering and Technology
• /
• v.35 no.2
• /
• pp.161-171
• /
• 2021

For the fatigue design of offshore structures, it is essential to understand and use the S-N curves specified in various industry standards and codes. This study compared the characteristics of the S-N curves for five major codes. The codes reviewed in this paper were DNV Classification Rules (DNV GL, 2016), ABS Classification Rules (ABS, 2003), British Standards (BSI, 2015), International Welding Association Standards (IIW, 2008), and European Standards (BSI, 2005). Types of stress, such as nominal stress, hot-spot stress, and effective notch stress, were analyzed according to the code. The basic shape of the S-N curve for each code was analyzed. A review of the survival probability of the basic design S-N curve for each code was performed. Finally, the impact on the conservatism of the design was analyzed by comparing the S-N curves of three grades D, E, and F by the five codes. The results presented in this paper are considered to be a good guideline for the fatigue design of offshore structures because the S-N curves of the five most-used codes were analyzed in depth.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.1
• /
• pp.142-149
• /
• 1999

A machine frame has been manufactured by casting. However, due to the development of the industrial society, 3-D duties was refused. Especially, the declination of the casting industry makes it difficult to produce the frame. Many companies still manufacture the small casting products. The large casting products are extremely limited and manufactured for their own use. Therefore, it is difficult to keep the term of order. In this study, the characteristics of steel structure which is produced by welding were identified in the view of mechanical strength of steel structure which is produced by welding were identified in the view of mechanical strength to substitute steel structure for casting frame. But welding structure has the residual stress, HAZ and welding deformation. Residual stress and HAZ especially cause crack growth. The proposed steel structure, based on the simulation and experiment(tensile curve and S-N curve), can reduce not only the producting term but also the weight of the frame.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.05a
• /
• pp.148-151
• /
• 2004

Mechanical properties such as Young's modulus and hardness of thin film in coated steel are difficult to determine by nano-indentation from the conventional analysis using the load-displacement curve. Therefore, an analysis of the nano-indentation loading curve was used to determine the Young's modulus, hardness and strain hardening exponent. A new method is recently being developed for plasticity properties of materials from nano-indentation. Elastic modulus of the thin films shows relatively small influence whereas yield strength and strain hardening are found to have significant effect on measured data. The load-displacement behavior of material tested with a Berkovich indenter and nano-indentation continuous stiffness method is used to measure the modulus and hardness through thin films.

• Proceedings of the IEEK Conference
• /
• 2003.11a
• /
• pp.15-18
• /
• 2003

This paper proposes a color matching 3D look-up table simplifying the complex color matching procedure between a monitor and a mobile display device. In order to perform color matching, it is necessary to process color of image in the device independent color space like CIEXYZ or CIELAB. We improved the S-curve model to have smaller characterization error than tolerance error. Also, as a result of the experiments, we concluded that the color matching look-up table with 64(4$\times$4$\times$4) is the smallest size allowing characterization error to be acceptable.