• 한국군사과학기술학회지
• /
• 제14권6호
• /
• pp.1192-1197
• /
• 2011

Recent developments of small-size unmanned or manned mobile systems such as autonomous robots, exoskeleton or armored suits, micro air vehicles, and unmanned armored vehicles require long-lasting independent power sources of high energy and power density to support the systems' operation for up to 72 hours in the fields. Chemical batteries such as Ni-MH, Li-Ion, the current primary power sources for mobile devices, however, are not capable of providing enough power and energy density for the next generation high power mobile machines. For this reason, KIMM along with KERI and KIMS has been carrying out a 500W MTG development project under the DAPA's "Next generation military power source R&D program" since 2009. In this paper, a design process for a 500W MTG system currently being developed at KIMM is briefly described and the technical issues related to its development are addressed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.619-620
• /
• 2006

In this paper, the CAE Service System for Collaborative Engineering Environment with web services and Multi-frontal Method has been investigated and developed. The enabling technologies such as SOAP and .NET Framework play great roles in the development of integrated distributed application software. In addition to the distribution of analysis modules, numerical solution process itself is again divided into parallel processes using Multi-frontal Method for computational efficiency. We believe that the proposed approach for the analysis can be extended to the entire product development process for sharing and utilizing common product data in the distributed engineering environment.

• 정보처리학회논문지B
• /
• 제10B권5호
• /
• pp.535-542
• /
• 2003

본 연구는 컴퓨터에서 칼라 전자문서를 사용할 때 나타나는 색맹 및 색약 장애자의 혼란을 경감시키기 위하여 컴퓨터 디스플레이에 적용되는 보조 기술에 관한 것이다. 본 연구에서는 보조 기술을 마이크로소프트의 윈도우즈를 256색 모드로 사용할 때로 제한하였으며, 여러 개의 창을 열었을 때 나타나는 색의 왜곡을 줄이는 방식을 사용하였다. 색맹 및 색약 장애자용 팔레트는 christine이 표준으로 제안한 웹에서 안전한 216색상의 팔레트론 기준으로 모든 전자 문서에 적용한 수 있도록 256색 팔레트로 확장하여 구현하였다. 구현된 색각 보정 소프트웨어를 적록색맹 시뮬레이터를 사용하여 시험한 결과 색각 보정 효과가 있음이 검증되었다. 구현된 색각 보정 S/W는 전자문서의 설계과정에서 사용하면 좀 더 큰 색각 보정 효과를 거둘 수 있다.

• Korean Chemical Engineering Research
• /
• 제44권2호
• /
• pp.149-159
• /
• 2006

본 연구는 고분자제품을 생산하는 실제 조업 중인 한 화학공장에서 발생되는 최적 생산일정을 얻어내고 그 결과를 산업에서 비전문가가 사용할 수 있도록 하는 프로그램을 작성한 것이다. 이를 위해 최적 생산계획의 목적함수를 생산량 환산 손실량(톤)으로 한 최적화용 모델을 작성하였고 최적화를 위해 유전 알고리즘을 적용하였다. 이 공장에서는 3가지 제품이 생산된다. 주요 생산품은 두 가지이나 제품 교체시 발생하는 저급 제품을 싼 가격에 판매하므로 총 3가지 제품으로 볼 수 있다. 하지만, 제품별로 포장의 종류가 bulk 제품, 국내용 포장제품, 수출용 포장제품 등 3가지(저급제품은 포장 종류가 한 가지)이다. 이 산업체는 여러 가지의 포장 종류에 따른 수요가 늘어 납기일에 제품을 완성하는데 어려움을 격고 있다. 본 연구에서는 정확한 모델링을 위해 현장 조업상황과 제약조건을 현실감 있게 구성하였고 이 모델을 바탕으로 최적의 생산일정을 찾아내는 S/W 프로그램을 개발하였다. 최적화에 사용된 유전알고리즘은 본 산업체의 공정특성을 최대한 반영하여 최적 해를 이끌어 내어 주었다. 그 결과 기존공정의 생산일정에 비해 50％ 이상의 손실액 감소를 얻어내었다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 제5회 박판성형 SYMPOSIUM
• /
• pp.81-85
• /
• 2006

The characteristic of sheet metal process is the few loss of material during process, the short processing time and the excellent price and strength. The sheet metal process with above characteristic is common used in industrial field, but in order to analysis irregular field problems the reliable and economical analysis method is demanded. Finite element method is very effective method to simulate the forming processes with good prediction of the deformation behaviour. Among Finite element method, The static-implicit finite element method is applied effectively to analyze real-size auto-body panel stamping processes, which include the forming stage. In this paper, it was focussed on the drawability factors on auto-body panel stamping by AUTOFORM with using tool planing alloy to reduce law price as well as high precision from Design Optimization of die. According to this study, the results of simulation will give engineers good information to access the Design Optimization of die.

• 소성∙가공
• /
• 제20권4호
• /
• pp.296-302
• /
• 2011

The objective of this paper is to determine the effect of process parameters on the behavior of a 18Cr-10Mn-$0.44N_2$ nitrogen steel sample deformed by hot rolling. Compression tests were carried out at high temperatures to determine the flow stresses needed for a finite element(FE) analysis. The strain rate, ranging from 0.1 to $1.0s^{-1}$, significantly affected the flow stress at temperatures higher than $1,000^{\circ}C$. Non-isothermal rolling simulations and laboratory rolling tests were performed with plate specimens 14.5mm thick, 135mm wide and 226mm long. A rolling reduction of 15% per pass leading to a cumulative rolling reduction of 60% was determined as optimal. The extension ratio of 176.5% in the length direction was about 30.4 times greater than the extension ratio of 5.8% in the width direction. Isotropic properties for tensile strength, microstructure and grain size were measured after mock-up hot rolling tests. The results from the mockup tests were found to be in good agreement with those of the simulations.

• 국제학술발표논문집
• /
• The 2th International Conference on Construction Engineering and Project Management
• /
• pp.749-758
• /
• 2007

Learning has become an important aspect for any organization to stay relevant and competitive in the corporate world of survival. In construction industry, the international construction joint ventures (ICJVs) provide an excellent platform with opportunity of learning among partners seeking to develop new area of competency and improve their overall competitiveness for their next project endeavor. This paper discusses the development of a conceptual model of effective learning in ICJVs using four major stages of development in a typical joint venture (JV) 's process. The study identified that there are three key constructs that contribute to effective learning comprising learning conditions in the JV's pre-inception stage, success factors of JV for learning in the forming & organizing stage, and learning actions in the implementation & adjustment stage. The effective learning outcomes are measured by the characteristics of learning organization during the JV's completion & evaluation stage. Details and issues of each stage and the methodology of research will be presented and discussed.

• 한국항공우주학회지
• /
• 제35권11호
• /
• pp.1036-1042
• /
• 2007

비행조종컴퓨터 하드웨어 개발은 상용 툴 및 전용 개발치구가 전무하여 전 근대적인 방법으로 개발하고 있어 개발 기간을 단축하기가 용이하지 않다. 모델링 및 시뮬레이션과 가상현실 기술을 이용하여 비행조종컴퓨터 하드웨어 개발에 적용하는 프로세스 개선 툴이 필요하게 되었다. 본 논문에서는 비행조종컴퓨터 입/출력 신호 흐름, 입력 신호의 고장모니터 및 고장 관리 알고리즘, 논리 회로의 작동, 회로기판 조립체의 형상 및 장착 등과 같은 비행조종컴퓨터의 설계특성을 가상의 공간에 시각화 하고 모사할 수 있는 프로세스 개선 툴을 제안한다. 프로세스 개선 툴 사용자는 open flight format의 3차원 모델링 데이터를 이용하여 구성된 비행조종컴퓨터 모델을 사용하여 회로기판 조립체까지 분해/조립을 할 수 있으며 다양한 비행조종컴퓨터 설계 형상을 시뮬레이션 할 수 있다.

• 농업과학연구
• /
• 제49권4호
• /
• pp.677-696
• /
• 2022

Development of radish collectors may enhance radish production and promote upland crop mechanization in the Republic of Korea. Theoretical analysis of power is crucial to ensure the optimum design of agricultural machinery. The aim of the present study is to analyze theoretically the power requirement of a tractor-mounted radish collector under development and to propose design guidelines. The important components of the radish collector were belt-type conveyors, three hydraulic motors, and a direct current (DC) winch motor to operate the total radish collecting process. Theoretical equations were used to calculate the hydraulic motor's power, winch motor power, and draft power at loaded and unloaded conditions. A variety of tractors (44 - 74 kW) and different soil characteristics (hard, firm, tilted, and sandy) were considered to investigate the appropriate drawbar power. Variations of the power requirement of the tractor-mounted radish collector were observed due to modifications of the design parameters. The required hydraulic power of the stem cutting conveyor, stem cutting blade, and transfer conveyor of the radish collector were 0.23 and 0.24, 0.18 and 0.19, and 0.19 and 0.22 kW under unloaded and loaded conditions, respectively. The maximum draft power was calculated as 0.89, 1.07, 1.25, and 1.61 kW at a 30° tilted angle for hard, firm, tilted, and sandy soil, respectively. The calculation showed 2.07 kW DC power was required for unfolding or folding the stem-cutting conveyor. A maximum power of 4.78 kW was prescribed for conducting the whole process of the tractor-mounted radish collector. The analysis of power introduced in this study will be helpful to select the appropriate design parameters for the successful development of a tractor-mounted radish collector.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.526-528
• /
• 2004

This paper describes the SAR data processing S/W package it will be able to process the SAR image. This package constructs the several modules: SAR Image processing module, measuring module of surface displacement using differential interferometric SAR method, classification module using the POLSAR data, SAR Focusing module. In this paper, briefly describe the algorithm that is adopted to the functions, and module architecture.