• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.315-315
• /
• 2013

We report the electronic structure modification in the swift heavy ion (SHI) irradiated N-doped ZnO thin films prepared by RF sputtering from ZnO target in different ratio of Ar/$N_2$ gas mixture using highly pure $N_2$ gas. The different N-ZnO thin lms were then irradiated with 120 MeV Ag ion beam with different doses ranging from $1{\times}10^{11}$ to $5{\times}10^{12}$ ions/$cm^2$ and characterized by XRD and near edge X-ray absorption ne structure (NEXAFS) at N and O K-edges. The NEXAFS measurements provide direct evidence of O 2p and Zn 3d orbital hybridization and also the bonding of N ions with Zn and O ions. The minimum value of resistivity of $790{\Omega}cm$, a Hall mobility of $22cm^2V^-1s^-1$ and the carrier concentration of $3.6{\times}10^{14}cm^{-3}$ were yielded at 75% $N_2$. X-ray diffraction (XRD) measurements revealed that N-doped ZnO films had the preferential orientation of (002) plane for all samples, while crystallinity start decreasing at 32.5% $N_2$. The average crystallite size varies from 5.7 to 8.2 nm for 75% and then decreases to 7.8 nm for 80% $Ar:N_2$ ratio.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2003년도 생물공학의 동향(XII)
• /
• pp.686-689
• /
• 2003

염기서열 분석이 완료된 9종의 고세균 (Archaea)과 15종의 단백세균 (Proteobacteria)에 대하여 유전자보유 유무와 16S rRNA에 의한 계통수를 neighbor joining method와 통계적 의미를 갖는 bootstrap method (n=1000)를 이용하여 분석하였다. 보존적 COG와 각 미생물 보유 ortholog수에 대한 비율은 4.60% (Mezorhizobium loti)와 56.57% (Mycoplasma genitalium) 사이로 종에 따라서 공통 유전자의 보유정도가 차이를 보이는 것으로 독특한 유전자를 탐색할 수 있는 가능성을 제시하는 결과로 사료되었다. Archaeabacteria와 Proteobacteria 그리고 Firmicutes모두 유전자보유 계통수와 16S rRNA 계통수가 일치하는 부분과 일치하지 않는 부분으로 나뉘어진다는 것을 알 수 있었다.

• Journal of Nutrition and Health
• /
• 제39권1호
• /
• pp.28-34
• /
• 2006

This study was performed to compare nutrients intake and levels of three elements (iron, copper and zinc) in the plasma of breast cancer patients to those in healthy controls. Patients (n = 97) and their age-matched healthy control groups (n = 97) participated in the study. A semi-quantitative food frequency questionnaire specifically formulated to evaluate the consumption of nutrients was used to estimate dietary intake. Only plasma was taken from the 20 patients and their age-matched healthy control group. Plasma concentrations of iron, copper, zinc, ratio of Cu/Zn were measured in both groups. Results showed that patients consumed significantly lower protein, fat, iron. Plasma level of copper and ratio of Cu/Zn were significantly higher in patients compared to those of controls. In conclusion, change of trace elements in plasma might be useful and significant as biomakers involving the initial process. And these results imply that trace elements status is a factor related to breast cancer risk and suggest that proper intake of those nutrients is required for cancer prevention.

• 대한물리의학회지
• /
• 제4권4호
• /
• pp.249-255
• /
• 2009

Purpose：To investigate of gait component in Parkinson's Disease patient. Methods：participated Parkinson's Disease patient(n=12) and Normal adult(n=13). gait measure used by GaitRite. Results：SPSS for win version 12 was used for statistic analysis and independent t-test used to find between two groups. In the comparison of temporal parameter of gait between groups, the swing phase was significant decreased in Parkinson's groups, in the stance phase was significant increased in Normal groups, in the single support was significant decreased in Parkinson's groups and in the double support was significant increased in Parkinson's groups(p<.05). In the asymmetrical ratio of singele support was significant increased in Parkinson's groups(p<.05), and the swing phase and stance phase was significant increased in Parkinson's groups(p<.05). Conclusion：In the Parkinson's Disease patient gait showed temporal and spatial component variable changes comparison normal adult. therefore, it was seems to very important considerable at gait tranning in clinical intervention.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.389.1-389.1
• /
• 2016

The flexible solid state device has been widely studied as portable and wearable device applications such as display, sensor and curved circuits. A zero-bias operation without any external power consumption is a highly-demanding feature of semiconductor devices, including optical communication, environment monitoring and digital imaging applications. Moreover, the flexibility of device would give the degree of freedom of transparent electronics. Functional and transparent abrupt p/n junction device has been realized by combining of p-type NiO and n-type ZnO metal oxide semiconductors. The use of a plastic polyethylene terephthalate (PET) film substrate spontaneously allows the flexible feature of the devices. The functional design of p-NiO/n-ZnO metal oxide device provides a high rectifying ratio of 189 to ensure the quality junction quality. This all transparent metal oxide device can be operated without external power supply. The flexible p-NiO/n-ZnO device exhibit substantial photodetection performances of quick response time of $68{\mu}s$. We may suggest an efficient design scheme of flexible and functional metal oxide-based transparent electronics.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1428-1430
• /
• 1996

Thin Silicon oxynitride(SiON) films have been chemically deposited using 193nm ArF Excimer Laser CVD, with $Si_{2}H_{8}$, $N_{2}O$, and $NH_3$ as the reactive gases and $N_2$ as the carrier gas. Experimental results show that deposition rate and refractive index have a strong dependence on substrate temperature, chamber pressure, gas ratio, laser power and laser beam height. Electrical characterization of oxynitride films demonstrates that for $NH_{3}/N_{2}O$ flow ratios ranging from 0.25 to 1, the leakage currents, the interface trap density and the capacitances (dielect ric constant) increase and the dielectric breakdown fields decrease

• Ocean and Polar Research
• /
• 제36권4호
• /
• pp.373-381
• /
• 2014

Korea contract Mn-nodule field in the NE equatorial Pacific is composed of seven sectors with average water depths of 4,513-5,025 m. Of the various factors controlling the properties of Mn-nodule, it seems that water depth is likely connected to the chemical composition and occurrence of nodules. To test whether such an assumption held in each sector, we reviewed previous research data accumulated since 1994 for one of the northern sectors (hereafter KR1) where there are stark contrasts in water depth. High-resolution seabed mapping clearly separates a northern part (KR1N) from a deeper southern part (KR1S), cutting across in the middle of the KR1. In addition, significant volcanic activities forming numerous seamounts are distinctive especially in KR1N. In terms of nodule occurrence, manganese nodules in KR1S are comparatively larger (2-4 cm) with a discoidal shape, while those in KR1N are generally small (<2 cm) with poly-lobate and irregular shapes. Nodules in KR1N also have lower Co, Cu, Mn and Ni, and higher Fe contents. The spatial separation in nodule characteristics might be caused by volcanic activities in KR1N rather than water depth contrast. During the formation of the seamounts in KR1N, rock fragments and volcanic ashes as new nuclei of the nodules would have been continuously generated. As a result, the nodules could not grow larger than 2 cm and display the shapes of a newbie (i.e., irregular and poly-lobate shapes). Moreover, significant Fe supply from volcanic activities probably decreases the Mn/Fe ratio, which may lead to the KR1 nodules being misinterpreted as a hydrogenic in origin compared to other sectors where a high Mn/Fe ratio is present.

• 한국콘텐츠학회논문지
• /
• 제6권1호
• /
• pp.1-7
• /
• 2006

본 논문에서는 Orthogonal Frequency Division Multiplexing(OFDM) 시스템의 Peak-to-Average Power Ratio(PAPR) 성능을 향상시키기 위한 목적으로 Selective Mapping(SLM)과 Partial Transmit Sequence(PTS)기법을 결합하는 방식에 있어서, 늘어나는 계산량을 감소시키는 방법을 제안한다. PAPR의 감소효율을 높이고자 하는 많은 기법 중에 SLM과PTS기법에 관한 활발한 연구가 진행되어 왔을 뿐만 아니라, SLM과PTS을 결합한 기법에 관한 많은 연구가 진행되어 왔다. 결합기법에 있어서는, 복잡성이 크게 증가하는 문제가 존재하는데, 이러한 계산량의 복잡성을 줄이는 방법으로, 본 논문에서는 N-point IFFT 알고리즘을 도입한 SLM과 PTS 기법들로 결합된 새로운 시스템을 제안하였다. 이 방법은 SLM과 PTS와의 단순 결합에 비하여 시스템의 계산량의 복잡성을 감소시키는 결과를 가져다준다. 제안된 기법에서의 계산량의 감소는 N-Point IFFT의 과정에서 생성되는 n개의 단계 중의 최적의 결과를 내는 단계에서 위상 시퀀스와 부블럭 인덱스를 곱함으로써 계산의 복잡성을 낮추어 주는 과정을 통하여 이룬다. 제안된 알고리즘의 성능의 우수성은 시뮬레이션을 통하여 실험적인 부분을 나타냈으며, 또한 해석적인 방법을 통하여 계산량이 감소함을 보였다.

• 한국자동차공학회논문집
• /
• 제5권2호
• /
• pp.60-68
• /
• 1997

Rayleigh Scattering Cross Sections($\sigma$i) of various gases and the temperature distributions of premixes C3H8/O2 flame are measured by high power KrF(248nm) Exci- mer laser and ICCD camera. Results show that $\sigma$i of O2 and Propane(C3H8) gases agree well in the 5% error range, but of H2 has the more or less difference from the calcul- ated value by other groups. This is attributed to the low RS signal of H2 to Nosie level(S/N ratio). The temperature distributions of flame range out between 300K in the air and about 2000K in the burned area. In this temperature range, out system has the about 250K temperature resolution. Because low RS signals in the reaction area with high temperature are affected highly by noises, temperature uncertainty of this area is relatively high to another part of flame. Experimental results show that UV Rayleigh Scattering can be used for the measurement of mixing ratio of mixed gases and the temperature distributions of flame. Especially, this technique can be applied for the measurement of the mixing ratio of air/fuel before the ignition and the flame structure after the ignition inside the Engine.

• 한국생산제조학회지
• /
• 제21권5호
• /
• pp.830-835
• /
• 2012

A research for application of LDSMC(Low Density Sheet Molding Compound) composite is in progress for lightening the weight. This paper has performed fatigue test and simulation of external panel for Korean commercial vehicle. Before the fatigue test, static test was carried out. From the test, the structural safety was investigated using Goodman diagram. After the static test performance, the fatigue test was conducted at a range of load frequency 5Hz, a stress ratio(R) of 0.05 and an endurance limit of $10^6$ to obtain the S-N curve. The S-N curve is applied to the fatigue analysis of the external panel assembly. The result of FEM analysis was in accord with the experimental result within 83% confidence. It showed that the process to set up the safety range of allowable error is required in process of the design and simulation verification.