• 대한전자공학회논문지
• /
• 제9권3호
• /
• pp.9-16
• /
• 1972

본논문은 "s"를 변환함수로 하는 GIC회로가 자이레이터와 마찬가지로 인덕터를 RC능동회로로서 실헐할 수 있고, 또 임의의 안정한 전달함수가 GIC를 포함한 2단자대회로의 open-circuit voltage ratio로서 실현될 수 있음을 밝힌 것이다. 트랜지스터를 사용하여 GIC회로를 구성함에 있어시 트랜지스터의 nullator-norator model이 적어도 10kHz 이하의 주파수 범위에서 훌륭하게 적용될 수 있음이 밝혀졌다. GIC를 사용한 회로합성법의 특징은 다음괴 같다. 첫째로, 임의의 안정한 전달함수는 대단히 단순한 회로구성을 되풀이함으로서 체계계적으로 또 기계적으로 실현될 수 있다. 둘째로, 전체 회로에 있어서 GIC를 제외한 모든 회로요소는 저항뿐이다. 셋째로 n차의 전달함수를 실현하는데 있어서 필요한 콘덴서의 수효는 n이며, 이것은 가능한 가장 적은 수효라고 믿어진다.

• Journal of Welding and Joining
• /
• 제16권3호
• /
• pp.111-120
• /
• 1998

To predict and evaluate metallurgical and mechanical behavior of th welds, it is essential to understand solidification behavior and microstructural evolution experienced in the welds, neither of which follows the equilibrium phase diagram because of rapid heating and cooling conditions. Metallurgical phenomena in austenitic stainless steel fusion welds, types 304, 309S, 316L, 321 and 304N, were investigated in this study. Autogenous GTA welding was performed on weld coupons, and primary solidification mode and phase distribution were investigated from the welds. Varestraint test was employed to evaluate solidification cracking susceptibilities of the alloys. GTA weld fusion zones in type 304, 321 and 304N stainless steels experienced primary ferrite solidification while those in type 309S primary austenite solidification. Type 316L exhibited a mixed type of primary ferrite and primary austenite solidification. The primary solidification mode strongly depended on $Cr_{eq}/Ni_{eq}$ ratio. In terms of solidification cracking susceptibility, type 309S that solidified as primary austenite exhibited high cracking susceptibility while the alloys experienced primary ferrite solidification showed low cracking susceptibility. The relative ranking in solidification cracking susceptibility was type 304=type 304N < type 321 < type 316L < type 309S.

• 약학회지
• /
• 제49권2호
• /
• pp.162-167
• /
• 2005

Synthetic method for the selective N-monoalkylation of anilines using alkyl halides and triethylamine under room temperature was described. The corresponding N-alkyl anilines were obtained in good yields with minor quantities of dialkylated products. Anilines 2a-m and 3a-m were identified using NMR and IR. A series of 2a-m and 3a-m has been synthesized from aniline, toluidines, ethylanilines, aminoacetophenones, phenetidines. Formation of anilines was undertaken with dropping of alkylhalides at room temperature in methanol (or ethanol) for 3 hours~5 days. Selectivity on the monoalkylation was relatively high. Synthetic ratio of monoalkylated and dialkylated product was 94 : 6 in case of maximum monoalkylation.

• 대한한의진단학회지
• /
• 제9권2호
• /
• pp.72-82
• /
• 2005

Background and purpose: Bell‘s Palsy is a condition that causes the facial muscles to weaken or become paralyzed. It's caused by trauma to the 7th cranial nerve, and is not permanent. The aim of this study is to be convinced of differences between facial electrodermal activities of paralyzed side and those of normal side in acute stage of Bell's Palsy patients Methods: Electrodermal activity (EDA) was performed within 1 week after the onset of facial palsy and facial nerve electromyography (EMG) at 2 weeks after the onset. The recovery of facial nerve function was documented by House and Brackmann grading. All the patients were followed up weekly until recovery or up to 6 weeks. Results: There was significant differences (conductivity A: t=3.319, p=0.002; conductivity C: t=2.699, p=0.010) between facial electrodermal conductivities of paralyzed side and those of normal side in acute stage of Bell's Palsy patients (N=45). And the result showed that logarithmic scale of electrodermal conductivity A value ratio obviousely decreased with logarithmic scale of EMG zygomatic branch amplitude ratio (r=-0.472, p=0.143); logarithmic scale of capacitance B, logarithmic scale of EMG temporal branch amplitude ratio (r=-0.422, p=0.133); logarithmic scale of conductivity C, logarithmic scale of EMG buccal branch amplitude ratio (r=-0.545, p=0.083) (N=12). Conclusion: Electrodermal conductivities increased in paralyzed facial side in acute stage of Bell's Palsy patients.

• 대한전자공학회논문지
• /
• 제22권2호
• /
• pp.60-65
• /
• 1985

A method of weighting of a staggered pulse train is presented and an improvement per-formance of the signal-to-noise ratio for each case is compared. As the result of a computer simulation, the signal-to-noise ratio for weighting of a stagger-ed pulse train is a great improvement on the case of an uniform pulse train. The signal-to-noise ratio of optimum weighting is more improved than that of binomial weighting, it is known that the signal-to-noise ratio is improved as the increasing of the number of delay line cancellers, and it is shown that the signal-to-noise ratio is improved by weighting of the MTI output pulses before the integration process.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2003년도 춘계 학술발표회논문집
• /
• pp.238-246
• /
• 2003

By using simulated ground motions, which is sum of earthquake signals and noise, we measured the distortion of response spectra due to noise. We found that the distortion is more closely related to the signal-to-noise (S/N) ratio of root-mean-square (RMS) measurement than that of conventional peak measurement. Given a S/M ratio, the distortion of absolute acceleration response spectra is independent on the earthquake magnitude, while that of relative displacement response spectra has a strong dependence on the earthquake magnitude. This means that, when we calculate response spectra from time histories, we can efficiently predict the distortion of acceleration response spectra simply by measuring the RMS SJN ratios, or the distortion of displacement response spectra by combining the RMS S/N ratios and the earthquake magnitudes.

• 한국양식학회지
• /
• 제10권3호
• /
• pp.335-346
• /
• 1997

연구는 순환 여과식 어류 양식 시설에 일반적으로 이용되고 있는 선라이트 골판을 여과재료로 한 침지식 여과조의 적정 탈질 조건을 구명하기 위해 외부 탄소원으로 메탄올과 글루코스를 사용하여 수리학적 체류 시간 (hydraulic retention time, HRT)과 COD에 대한 NO 하(3) 상(-)-N 비율 변화에 따른 적정 탈질 조건을 알아보았다. 질산성 질소와 총무기질소(TIN)의 제거 효율은 HRT 4 시간보다는 8 시간이 좋았으며, 글루코스보다는 메탄올을 이용한 것이 좋았다(P<0.05). 최대 질산성 질소 제거는 글루코스의 경우 HRT 8 시간과 C : N 비율 4일 때 86.3%였고, 메탄올은 HRT 8시간과 C : N 비율 5일 때 97.8%, 6일 때 92.2%를 보여 C : N 비율 5가 가장 최적인 것으로 나타났다. 최대 총무기질소 제거 효율은 HRT 8 시간일 때 C : N 비율 5에서 글루코스는 71.5%, 메탄올은 96.9%을 보였다. 탈질화에 필수적인 혐기적 조건은 HRT 8 시간과 C : N 비율 5 이상이 되었을 때 이루어진 것으로 보아 적정 C : N 비율과 혐기적 조건이 이루어졌을 때의 최적의 탈질 효율을 보이는 것으로 나타났다.

• 공업화학
• /
• 제10권5호
• /
• pp.804-807
• /
• 1999

페로센 카르복시알데히드와 1,2-diaminocyclohexane을 2:1로 반응시켜 키랄 리간드 L(L=N,N'-cyclohexane bis(ferrocenylmethylene)amine)을 합성하고 이를 구리와 반응시켜 새로운 구리 착물을 합성하였다. 이 착물들을 확인하고 비대칭 유기 합성반응에 촉매로 사용하였다. 구리(II) 착물들은 스티렌과 에틸디아조아세테이트와의 시클로프로판화 반응에서 촉매작용을 하지 않았으나 구리(I)화합물, Cu(I)LOTf (OTf=trifluoromethanesulfonate)는 시클로프로판 생성물 trans:cis의 비율에 있어 80:20 이상의 높은 regioselectivity를 보였다.

• 산업경영시스템학회지
• /
• 제20권43호
• /
• pp.205-209
• /
• 1997

One objective of the u control chart is to detect changes of mean nonconformities per unit occurred owing to various causes. This paper shows the detection probability using the Poisson distribution for various parameters, that is, subsample size n, mean nonconformities per unit $u_o$, and $u_o's$ change ratio k. We find that (1) as $u_o$ increases the smaller n is required for the same detection probability and the same change ratio; (2) as k gets away from 1 the smaller n is required; (3) the bigger n is required for the bigger detection probability. Several tables are given from our findings and are hoped to be used as guidelines for u chart users.

• 열처리공학회지
• /
• 제17권2호
• /
• pp.87-93
• /
• 2004

Nitrocarburizing was carried out with various $CH_4$ gas composition with 4 torr gas pressure at $570^{\circ}C$ for 3 hours and post oxidation was carried out with 100% $O_2$ gas atmosphere with 4 torr at different temperatures for various time. In the case of plasma nitrocarburizing, It is that the ratio of ${\varepsilon}-Fe_{2-3}$(N, C) and ${\gamma}^{\prime}-Fe_4$(C, N), which comprise the compound layer phase, depend on concentrations of $N_2$ gas and $CH_4$ such that when the concentration of $N_2$ and $CH_4$ increased, the ratio of ${\gamma}^{\prime}-Fe_4$(C, N) decreased, but the ratio of ${\varepsilon}-Fe_{2-3}$(N, C) increased. The thickness of compound layer consistently increased as gas concentration increased regardless of $N_2$ and $CH_4$ expect when the concentration of $CH_4$ was 3.5 volume%, it decreased insignificantly. When oxidizing for 15min in the temperature range of $460{\sim}570{^\circ}C$, the study found small amount of $Fe_3O_4$ at the temperature of $460{^\circ}C$ and also found that amounts of $Fe_2O_3$. and $Fe_3O_4$ on the surface and amount of ${\gamma}^{\prime}-Fe_4$(C, N) in the compound layer increased as the increased over $460^{\circ}C$, but the thickness of the compound layer decreased. Corrosion resistance was influenced by oxidation times and temperature.