• Title/Summary/Keyword: S/N Ratio

검색결과 2,599건 처리시간 0.239초

격자형 노치 필터를 이용한 정현파 검출기 (An Adaptive Line Enhancer Using Lattice Notch Filters)

  • 조남익;최종호;이상욱
    • 대한전자공학회논문지
    • /
    • 제24권4호
    • /
    • pp.719-726
    • /
    • 1987
  • In this paper, an adaptive IIR (infinite impulse response) notch filter of lattice type is constructed and its adaptation algorithm is proposed for the detection and retrieval of a sine wave signal embedded in noise. A modified method which adapts only one coefficient of the filter is also suggested. All these methods adapt the coefficients while keepting the poles of the filter inside the unit circle on z-plane, and thus they satisfy the condition on the stability of the IIR filter after it has converged. To investigate the convergence characteristics of these methods such as convergence speed and output S/N ratio, intensive computer simulation has been performed by varying the frequency of the sine wave and the input S/N ratio. And the results of the simulation have been compared to those of Rao and Kung's which shows relatively fast convergence speed. The methods proposed here, especially the second one. shows faster convergence speed and higher output S/N ratio than the Rao and Kung's.

  • PDF

동 박막의 피로한도 (Fatigue Limit of Copper Film)

  • 허용학;김동진;이해무;홍성구;박준협
    • 대한기계학회논문집A
    • /
    • 제33권10호
    • /
    • pp.1158-1162
    • /
    • 2009
  • Fatigue limit of the copper film coated by Sn was estimated using Goodman diagram and Gerber diagram. To obtain the high cycle fatigue life curve, S-N curve, of the film, the high cycle fatigue test was carried out by applying the constant amplitude load to the film specimen with three different stress ratio of 0.05, 0.3 and 0.5 and the frequency of 40 Hz at room temperature in air. The free-standing film specimen 15.26${\mu}m$ thick was fabricated by etching process. The fatigue limits and S-N curves at the respective stress ratios were determined from the experimental works. It was shown that the S-N curves were dependent on the stress ratio and the fatigue limit was increased with decreasing the stress ratio. The dependency of the fatigue behavior was presented in empirical relationship. Using these relationships, the fatigue limit was predicted.

딸기 수경재배에서 $NO_3-N$$NH_4-N$의 비율이 '장희(章姬)'의 생육, 수량 및 과실의 품질에 미치는 영향 (Effect of $NO_3-N$ : $NH_4-N$ Ratio in Nutrient Solution on Growth, Yield and Fruit Quality of Strawberry 'Akihime' in Hydroponic System)

  • 전하준;황진규;손미자;윤혜숙
    • 생물환경조절학회지
    • /
    • 제18권1호
    • /
    • pp.40-45
    • /
    • 2009
  • 본 연구는 딸기 배양액의 $NO_3-N$$NH_4-N$의 비율을 달리하여 '장희(章姬)' 딸기의 생육, 수량 및 과실의 품질, 그리고 양이온 흡수에 미치는 영향을 알아보고자 수행하였다. $NO_3-N$$NH_4-N$의 비율은 5.5:0, 4.0:1.5, $3.0:2.5me{\cdot}L^{-1}$로 조절하였다. 실험기간 동안 배양액내의 $NH_4-N$의 비율이 높아질수록 pH가 낮았으며, EC는 전 실험기간 동안 $0.8{\sim}1.0dS{\cdot}m^{-1}$로 4월 이후에 5.5:0 처리구가 다른 처리구보다 약간 낮았으나 그 외에는 처리구 간에 유의한 차이를 나타내지 않았다. $NO_3-N:NH_4-N$를 3.0:2.5로 $NH_4-N$의 비율을 높여도 양이온의 흡수에 길항증상이 나타나지 않았다. 딸기의 엽병장과 엽폭은 $NO_3-N$의 단독 처리구 보다 $NO_3-N:NH_4-N$이 4.0:1.5와 3.0:2.5인 처리구에서 더 길어졌다. $NO_3-N:NH_4-N$이 4.0:1.5와 3.0:2.5 처리구 간에는 유의한 차이가 없었다. 과장, 과경, 과중, 당도는 $NO_3-N$$NH_4-N$비율 차이에 따른 통계적인 유의차가 인정되지 않았다. 주당 과실 수량은 $NO_3-N:NH_4-N$ 4.0:1.5의 처리구에서 가장 낮았으며, 나머지 두 처리간에는 유의한 차이가 없었다. 실험 기간 동안 이상과는 전혀 발생하지 않았다.

$TaN/Al_{2}O_{3}$ 박막 저항소자 개발에 관한 연구 (A study on TCR characteristic of $TaN/Al_{2}O_{3}$ thin film resistors)

  • 김인성;조영란;민복기;송재성
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2002년도 춘계학술대회 논문집 센서 박막재료 반도체재료 기술교육
    • /
    • pp.82-85
    • /
    • 2002
  • In recent years, the tantalum nitride(TaN) thin-film has been developed for the electronic resistor and capacitor. In this papers, this study presents the surface profile and sheet-resistance property relationship of reactive-sputtered TaN thin film resistor processed by buffer of Ti and Cr on alumina substrate. The TCR properties of the TaN films were discussed in terms of reactive gas ratio, ratio of nitrogen, crystallization and thin films surface morphology due to annealing temperature. It is clear that the TaN thin-films resistor electrical properties are low TCR related with it's buffer layer condition. Ti buffer layer thin film resistor having a good thermal stability and lower TCR properties then Cr buffer expected for the application to the dielectric material of passive component.

  • PDF

UV Laser Raman Scattering을 이용한 정적 연소기내 분사된 연료의 정량적 당량비 측정에 관한 연구 (A Study on Quantitative Measurements of Equivalence Ratio in Constant Volume Chamber Using UV Laser Raman Scattering)

  • 진성호;허형석;김경수;박경석
    • 한국분무공학회지
    • /
    • 제3권4호
    • /
    • pp.35-42
    • /
    • 1998
  • Laser Raman scattering method has been applied to measure equivalence ratio of methane/air and propane/air mixture in constant volume combustion chamber. We used high power KrF excimer laser$(\lambda=248nm)$ and a high gain ICCD camera to capture low intensity Raman signal. Raman shifts and Ram cross-sections of $H_2,\;O_2,\;N_2,\;CO_2,\;CH_4\;and\;C_3H_8$ were measured precisely. Our results showed an excellent agreement with other groups. Mole fraction measurement of $O_2\;and\;N_2$ from air showed that $O_2\;:\;N_2$ = 0.206 : 0.794. We used constant volume combustion chamber and gas injector which is operated at $5\sim10barg$. Methane and propane are used as a fuel. 50 Raman signal are obtained and ensemble averaged for measurement of equivalence ratio. Our measured results showed that the equivalence ratio of fuel/air mixture is reasonable at ${\pm}5%$ error range.

  • PDF

GPS 보호비 연구 (A Study on the Protection Ratio of GPS)

  • 유병재;심용섭;조현묵;이일규;홍헌진
    • 한국통신학회논문지
    • /
    • 제36권3A호
    • /
    • pp.296-301
    • /
    • 2011
  • GPS(Global Positioning System)서비스는 다 우선서비스보다 중요성을 갖는 서비스로 분류 된다. 따라서, GPS는 간섭신호로부터 보호할 필요가 있으며 이에 본 논문에서는 비트에러율(BER)을 근거로 GPS의 보호비를 제안하였다. 도출된 최대허용 간섭신호는 -190 dBm/Hz이며 간섭신호 대 잡음비(I/N)값은 -16 dB이다. 도출된 GPS 보호비(I/N)는 GPS의 실제 운용마진을 4 dB로 고려할 경우 -20 dB로 요구된다. 분석결과는 향후 안정적인 GPS 서비스 운용을 위한 국내 GPS 보호기준 제정에 도움을 줄 것으로 기대된다.

재단각도 변화에 따른 오그림에 관한 연구 -소매산둘레선상의 각도를 중심으로- (A Study on Easing Contraction made by different angles About angles on the sleeve cap curve line)

  • 이명희;최석철
    • 한국의류학회지
    • /
    • 제22권1호
    • /
    • pp.41-48
    • /
    • 1998
  • An investigation made of the easing contraction ratio according to sewing conditions (eased seam angle; 0$^{\circ}$ 20$^{\circ}$ 30$^{\circ}$ 45$^{\circ}$ 60$^{\circ}$ 70$^{\circ}$ 90$^{\circ}$, stitch density; 38 stitches/3 cm(N1.0), 26 stitches/ 3 cm(N1.5), 19 stitches/3 cm(N2.0), 14 stitches/3 cm(N2.5), 12 stitches/3 cm(N3.0), thread; sp 60' s/2) by lockstitch industrial sewing machine with shirring foot. The results abstained were as follows: 1. The lower the stitch density , the higher the easing contraction ratio. 2. The easing contraction ratio at 0$^{\circ}$ and 90$^{\circ}$ were lower than bias angles (20$^{\circ}$, 30$^{\circ}$, 45$^{\circ}$, 60$^{\circ}$, 70$^{\circ}$). 3. As the results of visual test, the maximum easing conditions were Fl -0$^{\circ}$.20$^{\circ}$.30$^{\circ}$.45$^{\circ}$-12 stitches/3 cm(N3.0), 60$^{\circ}$. 70$^{\circ}$. 90$^{\circ}$-14 stitches/3 cm(N2.5), F2 -0$^{\circ}$. 20$^{\circ}$.30$^{\circ}$.60$^{\circ}$.70$^{\circ}$.90$^{\circ}$-19 stitches/ 3 cm(N2.0), 45$^{\circ}$ -14 stitches/3 cm(N2.5), and F3 -0$^{\circ}$.20$^{\circ}$.30$^{\circ}$.45$^{\circ}$.60$^{\circ}$.70$^{\circ}$.90$^{\circ}$-19 stitches/3 cm (N2.0). 4. Approximately easing contraction ratio was obtained as 2.0% (N1.0)~ 10.2% (N3.0) in F1, 6.7% (N1.0)~ 15.7% (N2.0) in F2, and 5.2% (N1.0)~ 12.1% (N2.0) in F3, according to different angles on the sleeve cap curve line. 5. As a resets of SPSS PC) statistics analysis, it confirmed the relations which were observed between easing contration ratio and stitch density, and easing contraction ratio was correlated with bending properties.

  • PDF

Na-Ca-Si-O-N계 Oxynitride Glass의 제조 및 특성 (Preparation and Properties of Na-Ca-Si-O-N System Oxynitride Glasses)

  • 이종호;이용근;최세영
    • 한국세라믹학회지
    • /
    • 제30권2호
    • /
    • pp.85-92
    • /
    • 1993
  • Oxynitride glasses in Na-Ca-Si-O-N system were prepared by melting at 135$0^{\circ}C$ for 2 hours in N2 gas. The effects of Si/Na mole ratio and the various Si3N4 contents were investigated. Stable oxynitride glasses can be obtained up to 9wt.% Si3N4 content in case the Si/Na mole ratio was 2.12 and 1.62, but $\beta$-Si3N4 was precipitated at 9wt.% Si3N4 content in case the Si/Na mole rtio was 1.12. Density (p), chemical durability, hardness (Hv), and fracture toughness (KIC) increased with increasing Si3N4 content. In cae the Si/Na mole ratio was 1.12, the increment of properties was remarkable but hardness and fracture toughness did not increase no longer owing to precipitation of $\beta$-Si3N4.

  • PDF

HVPE 법을 통한 GaN 성장 시 기판 종류 및 V/III 비에 따른 잔류 stress 특성 연구 (Study on residual stress characteristics according to the substrate type and V/III ratio during GaN growth by HVPE)

  • 이주형;이승훈;이희애;강효상;오누리;이성철;이성국;박재화
    • 한국결정성장학회지
    • /
    • 제30권2호
    • /
    • pp.41-46
    • /
    • 2020
  • 본 연구에서는 HVPE 성장법으로 GaN 성장 시 GaN 내에 잔류하는 stress로 인한 crack 현상을 감소시키고자 기판 종류 및 V/III 비를 조절하여 잔류 stress 특성을 알아보고자 하였다. Sapphire, GaN template 위에 각각 V/III 비 5, 10, 15의 조건으로 GaN을 성장시켜 형성된 hexagonal pit의 분포 및 깊이를 분석하였다. 이를 통해 GaN on GaN template 성장에서 V/III 비가 높을수록 hexagonal pit의 분포 영역 및 깊이가 증가하는 것을 확인하였다. Raman 측정을 통해 hexagonal pit 영역 및 깊이가 컸던 GaN on GaN template 성장에서 V/III 비가 높을수록 stress가 감소하는 것을 확인하였다. 이를 통해 hexagonal pit의 분포 및 깊이가 증가할수록 잔류 stress가 낮아짐을 확인할 수 있었으며, 향후 후막 GaN 성장 시 stress 감소 가능성에 대해 확인하였다.

관능성 단량체 및 중합체 (제1보). Lactam 고리를 함유하고 있는 Acryloyl 형 단량체의 중합 (Functional Monomers and Polymers (Ⅰ). Polymerization of Acryloyl-Type Monomer Containing Lactam Ring)

  • 노석균;서길수;최삼권
    • 대한화학회지
    • /
    • 제24권1호
    • /
    • pp.64-72
    • /
    • 1980
  • 새로운 acrylimide로서 N-acrylylpyrrolidone을 합성하였다. N-Acrylylpyrrolidone은 N-methacrylyl-lactam과는 다르게 homopolymerization을 열적으로도 함을 관찰하였다. Styrene과 N-acrylylpyrrolidone의 공중합시 각 monomer의 reactivity ratio를 구하였다. 그 결과 생성되는 copolymer는 pyrrolidone의 음이온 중합에 적절한 acyl-lactam function을 가지고 있음을 알았다.

  • PDF