• Journal of Mushroom
• /
• v.7 no.4
• /
• pp.182-186
• /
• 2009

Single ascospores was isolated in Yesan-gun, Chungnam in 2006 with Cordyceps militaris. This study was carried out to select the superior isolates which produce more fruiting body and contain more cordycepin contents. Five single ascospore isolates were cultured on brown rice pupae medium and they formed fruiting bodies. To select better isolates, each isolates was hybridized and then the characteristics and cordycepin contents were investigated. After biological efficiency and codycepin contents were examined, finally C0601S05 was selected. Top-cross test of isolate C0601S05 was carried with 29 single ascospores. From this test, isolate C0601S05${\times}$C0601S33 and isolate C0601S05${\times}$C0601S43 containing highest cordycepin contents were selected. Codycepin contents of C0601S05 was 246mg% and those of C0601S05${\times}$C0601S33 and C0601S05${\times}$C0601S43 were 325mg% and 280mg%, respectively. C0601S05${\times}$C0601S33 was registered as Yedang 3 at the Korea seed & variety service.

• Animal Systematics, Evolution and Diversity
• /
• v.13 no.3
• /
• pp.233-246
• /
• 1997

A genetic analysis using starch gel electrophoresis was performed to clarify the degrees of genetic differentiation and the phylogenetic relationships among four species of the genus Corbicula (Bivalvia, Corbiculidae). The average genetic similarity coefficients among the populations of each species on C. fluminea, C. leana and C. colorata were very closed (Rogers' S$\geq$0.970), whereas the other C. japonica was separated into two genetic groups (S=0.873) with distinct allelic difference at the Gpl locus. Thuefore additional taxonomic studies are needed on this species. On the other hand, these four species were well distinguished from each other genetically with distinct allelic differences at 4 to 9 loci. The genetic similarity coefficients (S) between C. leana and C. colorata, C. fluminea and C. leana, and C. fluminea and C. colorata were 0.737, 0.689, and 0.594, respectively. In particular, the average genetic similarity coefficients between these three species (inhabiting in freshwater) and the other C. japonica (inhabiting in brackishwater) were notably lower (S=0.370).

• Journal of the Korean Ceramic Society
• /
• v.38 no.8
• /
• pp.732-739
• /
• 2001

산업부산자원으로부터 유입되는 중금속이 시멘트 수화반응에 미치는 영향에 대하여 연구하였다. 출발물질은 순수시약을 사용하여 $C_3$S와 $C_2$S 조성으로 배합하고 여기에 Zn, Cu, Cr의 중금속 산화물을 1000ppm, 2000ppm, 3000ppm 첨가하여 150$0^{\circ}C$에서 1시간 소결하여 중금속의 고용분배, 결정구조, 용출상태 그리고 수화열을 관찰하였다. 중금속중 Zn는 $C_3$S와 간극질에 집중 고용되고 Cu는 간극물질에 집중 고용되며 Cr은 $C_3$S와 $C_2$S에 집중 고용되었다. 광학현미경 및 XRD 관찰결과 중금속 함량별로 $C_3$S와 $C_2$S의 결정상에는 큰 영향이 없는 것으로 나타났다. 그리고 7일간 수화시 Zn는 40~50%, Cu와 Cr은 전량 용출되었다. Conduction calorimeter 분석결과 중금속 함량별 변화에도 $C_3$S와 $C_2$S 수화열에는 차이가 없었다.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.2
• /
• pp.153-160
• /
• 2023

In this study, nano-sized C-S-H crystals were synthesized using the liquid phase reaction method and their properties were investigated. The synthesized C-S-H crystals were added to the cement composite in suspension form to determine their effect on the hydration properties of the cement. The amount of chemical admixture was varied to obtain nano-sized C-S-H crystals with optimal agglomerated morphology, and SEM photographs were analyzed. A cleaning process was added to remove harmful substances other than the synthesiz ed C-S-H crystals. It was found that the concentration of harmful substances was reduced in the case of C-S-H crystals subjected to the cleaning process. The synthesized C-S-H suspensions were prepared with and without the cleaning process, and cement composites were prepared with the cement weight content as the main variable. The effect of C-S-H crystals on the initial hydration properties of the cement was confirmed by microhydration heat analysis. In addition, mortar specimens were prepared to measure the compressive strength over time. The test results showed that the nano-sized C-S-H crystals act as nucleation sites in the cement paste to promote the early hydration of the cement and increase the early compressive strength.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.10 no.3
• /
• pp.252-257
• /
• 2000

To investigate the thermal preheating effect of the GaAs substrate exerted on the ZnS epilayers for the first time, ZnS epilayers were grown on the GaAs (100) substrate by hot wall epitaxy. The thermal preheating temperature was $450^{\circ}C$~$660^{\circ}C$. The full width at half maximum values of double crystal rocking curve were the smallest for the ZnS epilayers grown on the GaAs thermally preheated at around both $500^{\circ}C$ and $600^{\circ}C$. However, photoluminescence characteristics of ZnS epilayers were better at $600^{\circ}C$ than at $500^{\circ}C$. Therefore, it was shown that the optimum preheating temperature of the GaAs substrate for the growth of high quality ZnS epilayer was around $600^{\circ}C$. From these experimental results, it was shown that the crystal quality and the PL properties of ZnS epilayers were enhanced for the GaAs substrates thermally preheated at $600^{\circ}C$.

• Journal of Powder Materials
• /
• v.26 no.6
• /
• pp.493-501
• /
• 2019

In this work, ultra-fine calcium oxide (CaO) powder derived from eggshells is used as the starting material to synthesize mineral trioxide aggregate (MTA). The prepared CaO powder is confirmed to have an average particle size of 500 nm. MTAs are synthesized with three types of fine CaO-based powders, namely, tricalcium silicate (C3S), dicalcium silicate (C2S), and tricalcium aluminate (C3A). The synthesis behavior of C3S, C2S and C3A with ultra-fine CaO powder and the effects of C₃A content and curing time on the properties of MTA are investigated. The characteristics of the synthesized MTA powders are examined by X-ray diffraction (XRD), field emission-scanning electron microscope (FE-SEM), and a universal testing machine (UTM). The microstructure and compressive strength characteristics of the synthesized MTA powders are strongly dependent on the C3A wt.% and curing time. Furthermore, MTA with 5 wt.% C3A is found to increase the compressive strength and shorten the curing time.

• Journal of the Korean Mathematical Society
• /
• v.54 no.3
• /
• pp.967-986
• /
• 2017

We give the necessary condition for an operator defined on a cartesian product of $c_0(\mathcal{X})$ spaces to be summing or dominated and we show that for the multiplication operators this condition is also sufficient. By using these results, we show that ${\Pi}_s(c_0,{\ldots},c_0;c_0)$ contains a copy of $l_s(l^m_2{\mid}m{\in}\mathbb{N})$ for s > 2 or a copy of $1_s(l^m_1{\mid}{\in}\mathbb{N})$, for any $l{\leq}S$ < ${\infty}$. Also ${\Delta}_{s_1,{\ldots},s_n}(c_0,{\ldots},c_0;c_0)$ contains a copy of $l_{{\upsilon}_n(s_1,{\ldots},s_n)}$ if ${\upsilon}_n(s_1,{\ldots},s_n){\leq}2$ or a copy of $l_{{\upsilon}_n(s_1,{\ldots},s_n)}(l^m_2{\mid}m{\in}\mathbb{N})$ if 2 < ${\upsilon}_n(s_1,{\ldots},s_n)$, where ${\frac{1}{{\upsilon}_n(s_1,{\ldots},s_n})}={\frac{1}{s_1}}+{\cdots}+{\frac{1}{s_n}}$. We find also the necessary and sufficient conditions for bilinear operators induced by some method of summability to be 1-summing or 2-dominated.

• Journal of the Korean Ceramic Society
• /
• v.19 no.1
• /
• pp.51-57
• /
• 1982

The clinckers were obtained when a raw mixture consisted of limestone, slags and gypsum was burned at 134$0^{\circ}C$ for 30 minutes, and 128$0^{\circ}C$ for 30 minutes adding $CaF_2$ as a flux. The principal compounds of these clinkers were $C_3S_2$, $\beta-C_2S$, $C_1A_3{\bar{S}}$. To investigate hydration behavior, cements were made and hydrated at constant humidity cabinet (W/C=0.5 20$\pm 1^{\circ}C$). X-ray diffractometer, SEM, and conduction calorimeter were employed to examine the hydration behavior. The hydrates were mainly C-S-H, ettringite, $Ca(OH)_2$. By the hydration of $C_3S$ and $C_4A_3\bar{S}$, the needle-like ettringite filling the inner vacant spaces of the hardened body might contribute to the rapid-hardening and high-strength phenomena. Furthermore, the hardened body became stronger due to the hydration of $C_2S$ at later period. The addition of granulated blastfurnace slags have a potential to be a blended cement.

• Bulletin of the Korean Mathematical Society
• /
• v.36 no.2
• /
• pp.225-231
• /
• 1999

Let Mf(x) be the Hardy-Littlewood maximal function on $\mathbb{R}^n$. Let $\Phi$ and $\Psi$ be functions satisfying $\Phi$(t) = ${\int^t}_0$a(s)ds and $\Psi(t)$ = ${\int^t}_0$b(s)ds, where a(s) and b(s) are positive continuous such that ${\int^\infty}_0\frac{a(s)}{s}ds$ = $\infty$ and b(s) is quasi-increasing. We show that if there exists a constant $c_1$ so that ${\int^s}_0\frac{a(t)}{t}dt\;c_1b(c_1s)$ for all $s\geq0$, then there exists a constant $c_1$ such that(0.1) $\int_{\mathbb{R^{n}}$ $\Phi(Mf(x))dx\;\leq\;c_2$ $\int_\mathbb{R^{n}}$$\Psi(c_2\midf(x)\mid)dx$ for all $f\epsilonL^1(R^n_$. Conversely, if there exists a constant $c_2$ satisfying the condition (0.1), then there exists a constant $c_1$ so that ${\int^s}_\delta\frac{a(t)}{t}dt=;\leq\;c_1b(c_1s$ for all $\delta$ > 0 and $s\geq\delta$.

• Journal of the Korea Society of Computer and Information
• /
• v.9 no.3
• /
• pp.45-53
• /
• 2004

The fact that the end-user response time could become unacceptable in the 2-tier C/S system has been well known to C/S system developers. But inexperienced new developers who want to provide mobile solutions using PDA sometimes do not realize the ominous consequences of the 2-tier C/S systems. Except for the easy of development. the 2-tier C/S system has many weak points like in application deployment, security, scalability, application reuse, heterogeneous DBMS support, availability. and response time. This paper analyzes the response time in the 2-tier and 3-tier C/S systems through simulation. Although the problem space is confined to the 2 and 3 tiers, the result could be equally applied to any multi-tier systems.