• 제목/요약/키워드: Rutile

검색결과 510건 처리시간 0.032초

$TiCl_3$를 이용해서 합성된 $TiO_2$ 박막의 특성 (Characterisation of $TiO_2$ film synthesized using titaniumtetrachlo precusor)

  • 김강혁;이창근;이규환;김인수
    • 한국재료학회:학술대회논문집
    • /
    • 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
    • /
    • pp.111-111
    • /
    • 2003
  • The peroxo titanic acid solution was successfully prepared using titanium trichloride as a precursor. The basic properties of the TiO2 film prepared by the solution were investigated in view of phase change, bandgap energy, crystalline size etc. The film displayed amorphous TiO$_2$ at room temperature, anatase above 281$^{\circ}C$ and a mixture of anatase and rutile at 99$0^{\circ}C$, The crystalline size increases with annealing temperatures, while the bandgap energies decrease due to the quantum size effect and the formation of rutile phase which has low bandgap energy. As a result of TG-DTA, it was found that annealing treatment at 99$0^{\circ}C$ for 2h formed a mixtures of anatase and rutile through three steps: (1) the removal of physically adsorbed water (2) the decomposition of peroxo group (3) amorphous-anatase or anatase-rutile phase transformation.

  • PDF

$TiO_2$분말 제조 및 Verneuil 법에 의한 Rutile 단결정 성장 (Synthesis of $TiO_2$ Powders and Growth of Rutile by Verneuil Method)

  • 전형탁;김복희;손선기;오근호
    • 한국결정성장학회지
    • /
    • 제2권1호
    • /
    • pp.60-69
    • /
    • 1992
  • $TiCl_4$와(NH_4)_2SO_4$를 액상 반응시켜 암모늄 티타늄 설페이트를 형성시킨 뒤 하소하여 미립의 $TiO_2$분말을 만들었다. Anatase 분말로 Verneuil장치에서 Rutile단결정을 성장시킨 뒤 물성을 조사하였다. 최적의 성장조건은 $H_2:O_2=3:1$ 성장온도는 $1900^{\circ}C$ 분말공급속도는 10g/hr였다.

  • PDF

Rutile 단결정의 전기전도도 시간의존성 연구 (Studies on the Time Dependent Electrical Conductivity of Rutile Single Crystal)

  • 김병국;박순자
    • 한국세라믹학회지
    • /
    • 제26권1호
    • /
    • pp.1-6
    • /
    • 1989
  • The phenomena that the electrical conductivity of rutile single crystal changes with time were investigated along the a and c crystallographic axes, at 85$0^{\circ}C$ and Po2 in the range of 1~10-18.5atm. The D.C. conductivity decreased with and saturated some value after ca. 100 hours. But the A.C. conductivity showed no time dependence in the whole Po2 range. These experimental results suggest that the time dependence of D.C. conductivity of rutile single crystal is due to space charge polarization effect; the electrode was Pt which is complete electronic conductor, while the sample was TiO2 which is mixed conductor.

  • PDF

Crystal Structure Dependence for Reactivities of B12-TiO2 Hybrid Catalysts with Anatase and Rutile Forms

  • Shimakoshi, Hisashi;Nagami, Yoko;Hisaeda, Yoshio
    • Rapid Communication in Photoscience
    • /
    • 제4권1호
    • /
    • pp.9-11
    • /
    • 2015
  • The debromination of phenethyl bromide by the $B_{12}-TiO_2$ hybrid catalyst under UV light irradiation was investigated. The catalytic efficiency was dependent on the type of $TiO_2$. The anatase form of $TiO_2$ was superior to the rutile form of $TiO_2$. The selectivity of the product was also dependent on the crystal structure of $TiO_2$, and the rutile form of $TiO_2$ showed a high selectivity for the formation of the coupling product, 2,3-diphenylbutane, when compared to that of the anatase form of $TiO_2$.

항복강도 690MPa급 전자세용 FCA 용접와이어 개발에 있어 용접 입열의 영향 평가 (Effects of Heat Inputs on the Mechanical Properties of FCA Weldment of YP 690MPa Grade Steels)

  • 조영주;서대곤;신용택
    • Journal of Welding and Joining
    • /
    • 제34권6호
    • /
    • pp.11-15
    • /
    • 2016
  • YP 690MPa grade steels are used as the main structural steel for offshore structure such as Jack-up Rig and WTIV(Wind Turbine Installation Vessel). Most of welding consumables applied to YP 690MPa grade steels are basic type flux cored wires that shows the poor weldability and not suitable for all position welding. For this reason, welding consumables with rutile type flux system is required. Rutile type flux cored wires show excellent weldability and apply to all position welding. This paper presents the mechanical properties of weld metal with rutile type flux cored wire developed and finally assessed the possibility for application.

HRTEM Study of Phase Transformation from Anatase to Rutile in Nanocrystalline $TiO_2$ Particles

  • Kim, Kyou-Hyun;Park, Hoon;Ahn, Jae-Pyoung;Lee, Jae-Chul;Park, Jong-Ku
    • 한국분말야금학회:학술대회논문집
    • /
    • 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
    • /
    • pp.466-467
    • /
    • 2006
  • The anatase particle was facetted at the free surface and a neck formation between the anatase particles prior to the phase transformation occured. This resulted in the severe lattice distortion at the region of the interface near the neck and this can act as the nucleation sites for the phase transformation. The grain growth of rutile particles after the phase transformation grew very fast by the sweeping phenomena of grain boundary. Therfore, It leaded to the microstructure without the rutile phase located in anatase particle.

  • PDF