• Corrosion Science and Technology
• /
• 제7권2호
• /
• pp.119-124
• /
• 2008

Steel is generally not corrosion resistant to water with formation of non protective rusts on its surface. Rusts are composed of iron oxides such as $Fe_3O_4$, $\alpha-$, $\beta-$, $\gamma-$and ${\delta}-FeOOH$. However, steel, particularly weathering steel containing small amounts of Cu, Ni and Cr etc., shows good corrosion resistance against rural, industrial or marine environment. Its corrosion rate is exceedingly small as compared with that of carbon steel. According to the exposure test results undertaken in outdoor environments, the atmospheric corrosion rate for weathering steel is only 1 mm for a century. Atmospheric corrosion for steels proceeds under alternate dry and wet conditions. Dry condition is encountered on steel surface on fine or cloudy days, and wet condition is on rainy or snowy days. The reason why weathering steel shows superior atmospheric corrosion resistance is due to formation of corrosion protective rusts on its surface under very thin water layer. The protective rusts are usually composed of two layer rusts; the upper layer is ${\gamma}-FeOOH$ termed as lepidocrocite, and inner layer is nano-particle ${\alpha}-FeOOH$ termed as goethite. This paper is aimed at elucidating the atmospheric corrosion mechanism for steel in comparison with corrosion in bulky water environment by use of empirical data.The summary is as follows: 1. No corrosion protective rusts are formed on steel in bulky water. 2. Atmospheric corrosion for steel is the corrosion under wetting and drying conditions. Corrosion and passivation occur alternately on steel surface. Steel, particularly weathering steel with small amounts of alloying elements such as Cu, Ni and Cr etc. enhances forming corrosion protective rusts by passivation.

• 한국지반신소재학회논문집
• /
• 제16권4호
• /
• pp.75-82
• /
• 2017

본 연구에서는 지중 매설관의 새로운 세정공법으로 개발된 카본 다이옥사이드 펠릿을 이용한 분사 세정공법의 현장 적용성을 검토하였다. 이를 위해 우선적으로 미국 철강도금도장위원회에서 제안하고 있는 관 세정 전후에 관한 시방내용들을 조사하고 이를 기초로 하여 본 공법의 금속표면 처리기준을 선정하였으며 임의의 녹이 슨 관을 대상으로 카본 다이옥사이드 분사세정의 현장시험을 수행하고 세정도가 선정기준에 부합되는지를 검토하였다. 또한, 모양을 달리한 2가지의 노즐시스템이 적용되어 분사압에 따른 세정효과가 분석되었으며 각 노즐시스템에 대해서 최종 충격량 계측시험을 수행하여 공기압 대비 최종 분사압의 압력손실을 검토하였다. 연구결과, 제안된 공법은 미국철강도금위원회에서 규정하고 있는 수준을 상회하는 세정효과가 있음을 확인하였으며 노즐 비교실험으로부터 세정효과가 우수한 노즐도 선정되었다. 이로부터 카본 다이옥사이드 펠릿을 이용한 관 세정공은 완전탈락수준에 이르는 관 세정효과를 기대할 수 있을 뿐만 아니라 냉각제로의 이용 등에 국한되는 이산화탄소 재활용 부분의 활성화에 크게 기여할 수 있을 것으로 판단된다.

• Corrosion Science and Technology
• /
• 제13권5호
• /
• pp.195-203
• /
• 2014

Modern industry has a wide variety of application areas such as ocean industry, construction and automobile industry. With the current circumstances, the need for anti-corrosion technology that can be used on materials to withstand in harsh environments, is increasing. In this study, we have sought to develop a metal coating technology with zinc and aluminum powders as a potential anti-corrosion material. To make a coating on metal products, a thermal diffusion coating method was used under the conditions of $350^{\circ}C$ for 30 minutes. Optical microscope, Field emission scanning electron microscope (FE-SEM&EDX) and X-ray diffraction analysis were used to analyze a coating layer. As a result, we have confirmed that the generated amount of rust on metal parts coated with thermal diffusion coating method decreased dramatically compared with non-coated metal parts. Furthermore, the anti-corrosion performance was evaluated according to the different ratio of zinc and aluminum. Finally, we confirmed the possibility of application and commercialization of our coating technique on metal parts used in harsh industrial based on the results of these performance.

• 한국재난정보학회 논문집
• /
• 제16권2호
• /
• pp.411-419
• /
• 2020

연구목적: 본 연구는 건축물 및 교통 시설물 등에 사용중인 강재류가 시간에 흐름에 따라 부식이 발생됨에 따라 부식된 강재의 성능을 향상시키고 유지보수 효율성을 확보하기 위해 수분 경화형 방식 코팅액을 개발하였고, 그 성능 시험을 통해 최적의 성분 배율을 결정하도록 하였다. 연구방법: 연구를 위하여 다양한 배율의 코팅액에 대해 내식성 평가, 물리적 성질 평가, 저장안전성 평가 등을 시행하여 그 결과를 분석하였다. 연구결과: 분석결과 마그네슘을 추가로 첨가한 액체에서 컷팅 부위에 발청이 거의 없어 방식효과가 우수하였고, 블리스터 발생도 거의 없어 가장 우수한 배율로 분석되었다. 결론: 본 연구를 통해 그 성능이 인정된 수분 경화형 방식 코팅액에 대해 향후 새로운 성분 배율 실험을 통한 기능 향상과 시행 확대를 위한 제도적 개선 노력이 필요하다.

• 농약과학회지
• /
• 제8권1호
• /
• pp.8-15
• /
• 2004

베타-케토아세트아닐라이드 염화물 유도체의 합성 및 이들 화합물의 대표적인 6종의 식물병원균에 대한 항균력을 조사하였다. Carousel Reaction Stations 장치를 이용하여 조합 합성 기법을 통하여 키틴 이합 체를 염소와 아닐린 유도체와 차례로 반응시켜 89종의 베타-케토아세트아닐라이드 클로라이드 유도체를 얻었다. 합성된 화합물 라이브러리의 항균력(in vivo)을 벼 도열병, 벼 잎집무늬마름병, 토마토 잿빛곰팡이병, 토마토 잎마름역병, 밀 붉은녹병, 보리 흰가루병 등의 주요 식물병에 대한 항균력 시험을 수행하였다. 일반적으로 페닐기의 4위치 (para) 치환체가 존재하는 화합물의 경우에 선택적으로 토마토 잎마름역병을 방제하였다.

• 천문학회지
• /
• 제36권1호
• /
• pp.33-41
• /
• 2003

Recent observations have shown that coronal magnetic fields in the northern (southern) hemisphere tend to have negative (positive) magnetic helicity. There has been controversy as to whether this hemispheric pattern is of surface or sub-surface origin. A number of studies have focused on clarifying the effect of the surface differential rotation on the change of magnetic helicity in the corona. Meanwhile, recent observational studies reported the existence of transient shear flows in active regions that can feed magnetic helicity to the corona at a much higher rate than the differential rotation does. Here we propose that such transient shear flows may be driven by the torque produced by either the axial or radial expansion of the coronal segment of a twisted flux tube that is rooted deeply below the surface. We have derived a simple relation between the coronal expansion parameter and the amount of helicity transferred via shear flows. To demonstrate our proposition, we have inspected Yohkoh soft X-ray images of NOAA 8668 in which strong shear flows were observed. As a result, we found that the expansion of magnetic fields really took place in the corona while transient shear flows were observed in the photosphere, and the amount of magnetic helicity change due to the transient shear flows is quantitatively consistent with the observed expansion of coronal magnetic fields. The transient shear flows hence may be understood as an observable manifestation of the pumping of magnetic helicity out of the interior portions of the field lines driven by the expansion of coronal parts as was originally proposed by Parker (1974).

• 열처리공학회지
• /
• 제15권5호
• /
• pp.213-218
• /
• 2002

In order to develop the economic and environmental water-soluble black coloring agent, some adequate chemical mixtures were mixed and this solution was applied to coat quenched and tempered 51B20 steel bolt. Some basic properties of the solution and characteristics of the coated film in addition to the corrosion resistance were investigated. The developed 100 kg of water-soluble black coloring agent solution was a chemical mixture consisted of 10 kg of aqueous coloring agent, 40 kg of surface active agent, 0.3 kg of anti-foam agent and $50{\ell}$ of water. The coated film of the bolt was composed of hard layer of about $2{\mu}m$ and the disbondable soft layer of about $4{\mu}m$ above the hard layer. Many surface active agents peaks and a few hydrophilic peaks were observed in the coated film. Surface roughness value of the coated bolt was lower than that of the non-coated bolt. Corrosion resistance of the coated bolt considerably improved and also relatively showed a good polarization resistance at test condition of $40^{\circ}C$ colorizing temperature and 5% the solution concentration in 3% NaCl anodic polarization test. Initial appearance time of the surface rust was greatly retarded owing to the coated film in salt spray test.

• 수산해양기술연구
• /
• 제38권1호
• /
• pp.79-88
• /
• 2002

SUS420J2강은 내식성이 우수하고 강도가 커서 어류가공용 기계의 재료로써 사용되어지고 있다. 그러나 이 역시 환경의 영향에 의하여 열화되고 있으며, 특히 후처리의 조건에 따라 그 정도가 심해질 수도 있다는 것을 알 수 있었다. 열처리 후 전해연마한 경우에 있어서는 부식의 정도가 미약하였으나 단일 후처리방법을 사용하였을 때에는 입계부식 및 공식의 영향이 커지고 부식생성물의 생성이 용이해졌다. 실험의 결과로부터 열처리후 전해연마한 SUS420J2강의 부식정도가 가장 덜 민감하게 나타났으므로, 어류 전처리 가공기계용 재료로서 SUS420J2강의 사용에 있어서는 열처리 후 전해연마의 방법으로 후처리를 하는 것이 바람직하다고 생각된다. 금후, 경도 및 표면상태의 파라미터(parameter)를 고려한 부식시험과 현장에서의 외력의 작용을 고려한 응력부식 실험이 결과도 병행되어져야만 한다고 생각한다

• The Plant Pathology Journal
• /
• 제22권1호
• /
• pp.94-96
• /
• 2006

In a search for plant extracts with potent in vivo antifungal activity against various plant pathogenic fungi, the methanol extract of the Curcuma longa rhizomes effectively controlled the development of rice blast catised by Magnaporthe grisea and tomato late blight caused by Phytophthora infestans. Three curcuminoids such as curcumin, demethoxycurcumin, and bisdemethoxycurcumin were purified from the methanol extract of C. longa rhizomes as antifungal principles. Among the three curcuminoids, demethoxycurcumin was the most active to both rice blast and tomato late blight, followed in order by curcumin and bisdemethoxycurcumin. However, they all exhibited no or little in vivo antifungal activity against other fungal pathogens causing rice sheath blight (Corticium sasaki), tomato gray mold (Botrytis cinerea), wheat leaf rust (Puccinia recondita), or barley powdery mildew (Blumeria graminis f. sp. hordel).

• The Plant Pathology Journal
• /
• 제25권1호
• /
• pp.1-5
• /
• 2009

Root rot caused by Cylindrocarpon destructans is one of the most important diseases of ginseng (Panax ginseng C. A. Meyer). Two types of symptoms found in ginseng root rot are black root rot and rusty root (rusty spots), in which disease severities are high and low, respectively. Symptom development and related histopathological changes were examined in an inoculation test on 2-year-old ginseng roots using virulent (Cy9801) and avirulent (Cy0001) isolates of C. destructans under different temperature conditions (13, 18, 23, and $28^{\circ}C$). Black root rot was only induced by Cy9801 in the lower temperature range (13, 18, and $23^{\circ}C$) and not at the higher temperature ($28^{\circ}C$). No black root rot, but only rusty spot symptoms, were induced by Cy0001 at all temperatures tested except $13^{\circ}C$, at which no symptoms occurred on over half of inoculation sites, suggesting disease development was influenced by pathogen virulence and temperature. Wound periderms were formed in all root tissues with rust spot symptoms at $28^{\circ}C$ caused by Cy9801 and at 18, 23, and $28^{\circ}C$ temperatures caused by Cy0001. No wound periderm was formed at $13^{\circ}C$ by either Cy9801 or Cy0001. Light microscopy revealed that the wound periderm was formed by initial cell divisions in cell wall formation and/or additional cell wall layering in parenchyma cells without obvious nuclear division, followed by layering of the divided cells adjacent to the inoculation sites, blocking the spread of the rot. These results suggest that disease development declined at lower temperatures and by the formation of a wound periderm at higher temperatures, and that ginseng rusty root may develop under conditions unfavorable for further disease development of C. destructans.