• Applied Biological Chemistry
• /
• 제46권3호
• /
• pp.240-245
• /
• 2003

여러종류의 리파제를 이용하여 $({\pm})-2-(4-chlorophenyl)-2-cyano-2-phenyl-1-hexanol(2)$와 이의 acetate ester(3)을 광학분할하고 분할된 화합물들을 이용하여 (R) 및 (S)-systhane을 합성하였다. 현재 상품으로 팔리고 있는 $({\pm})-systhane$과 (R) 및 (S)-systhane의 항균활성을 조사하여 2 ppm의 농도에서 모든 systhane이 밑붉은녹병과 보리흰가루병에 대하여 92%의 항균활성을 보여주었으나 (R) 및 (S)-systhane이 $({\pm})-systhtne$보다 더 좋은 항균팔성을 보여주지는 않았다.

• 한국식물병리학회지
• /
• 제14권6호
• /
• pp.676-681
• /
• 1998

Disease incidence of Codonopsis lanceolata was surveyed at the major cultivating fields in Chonbuk province in 1996 to 1997. The main diseases of Codonopsis lanceolata were ovserved as leaf spot caused by Septoria codonopsis, anthracnose by Glomerella cingulata, brown leaf spot by Cercospora sp., rust by Coleosporium koreanum, powdery mildew by Erysiphe sp., Fusarium wilt caused by Fusarium oxyporum, and white root rot by Sclerotium rolfsii. Anthracnose, leaf spot and brown leaf spot occurred severely on leaves from early July to late August. They were caused early fallen leaves. Fusarium wilt and white root rot occurred severely on stem and below the soil line in late August. They resulted in withering to death or chlorosis and fallen of leaves. Disease incidence of Codonopsis lanceolata was also substantially different in occurrence with a method of cultivation in late growth stage. Fusarium wilt and white root rot were more severe with a method of no support cultivation than those with a method of support cultivation with a stick. Fusarium wilt occurred 48.8% in a method of no support cultivation but 3.1% in a method of support cultivation with a stick. And white root rot occurred 18.9% in a method of no support cultivation but 0.3% in a method of no support cultivation with a stick. Thus, it proved that soil-borne diseases could be controlled support cultivation with a stick.

• 식물병연구
• /
• 제21권3호
• /
• pp.250-252
• /
• 2015

The tejocote (Crataegus spp.) is a tree considered to be native to Mexico. The aim of this study was to identify the causal agent of tejocote rust in the State of Puebla. Tejocote fruits were sampled in 2012 and 2013. The fungus was studied morphologically using light and scanning electron microscopy and molecularly using phylogenetic analysis of 18S and 28S rDNA genes. The fungus was identified as Gymnosporangium clavipes on tejocote fruits. To our knowledge, this is the first confirmed report of Gymnosporangium clavipes Cooke & Peck affecting Crataegus mexicana var. Chapeado and C. gracilior in Puebla Mexico.

• Structural Engineering and Mechanics
• /
• 제53권6호
• /
• pp.1183-1200
• /
• 2015

Reinforcement corrosion can cause serious safety deterioration to aging concrete structures exposed in aggressive environments. This paper presents an approach for reliability analyses of deteriorating reinforced concrete structures affected by reinforcement corrosion on the basis of the representative symptoms identified during the deterioration process. The concrete cracking growth and rebar bond strength evolution due to reinforcement corrosion are chosen as key symptoms for the performance deterioration of concrete structures. The crack width at concrete cover surface largely depends on the corrosion penetration of rebar due to the expansive rust layer at the bond interface generated by reinforcement corrosion. The bond strength of rebar in the concrete correlates well with concrete crack width and decays steadily with crack width growth. The estimates of cracking development and bond strength deterioration are examined by experimental data available from various sources, and then matched with symptom-based lifetime Weibull model. The symptom reliability and remaining useful life are predicted from the predictive lifetime Weibull model for deteriorating concrete structures. Finally, a numerical example is provided to demonstrate the applicability of the proposed approach for forecasting the performance of concrete structures subject to reinforcement corrosion. The results show that the corrosion rate has significant impact on the reliability associated with serviceability and load bearing capacity of reinforced concrete structures during their service life.

• 미생물학회지
• /
• 제13권1호
• /
• pp.37-44
• /
• 1975

As a basic study to elucidate nutritional physiology and composition of synthetic medium of red rotting bacteria, Erwinia carotovora, of ginseng, the effects of hydrogen ion concentration, various kinds of carbon sources, nitrogen source, micrometallic salts and it's concentration on the gorwth of the bacteria were investigated and the results were as follows. Optimal pH in the basal medium for the growth of the bacteria was 6.5. After incubation the pH in culture media was neutralized. Among the various kinds of carbon sources, sucrose, glucose mannitol, but organic acids were not utilized effectively as nutrients. After incubation the pH turned acidic. Alanine as organic nitrogen sources nad ammonium sulfate as inorganic nitrogen promoted the growth, but L-valine and sodium nitrite were the least effective. Ferric chloride 1.0mg/dl and ferrous sulfate 100mg/dl were the most effective as micrometallic sources. Control and boric acid were the least effective. New synthetic medium based on the above results was follows ; Alanine 1.0g, $KH_2PO_4$ 1.0g, sucrose 30.0g, $MgSo_4$ $7H_2$O 0.5g, $FeCl_36H_2$O 1.0mg thiamine 200.gamma.g, and distilled water 1000ml, pH6.5.

• Journal of Microbiology and Biotechnology
• /
• 제27권7호
• /
• pp.1272-1275
• /
• 2017

Two dimeric sesquiterpenes were separated from Chloranthus japonicus Sieb. and identified as shizukaols C and F. They exhibited potent antifungal activities ($MICs=4-16{\mu}g/ml$) in vitro against various plant pathogenic fungi (Pythium ultimum, Phytophthora infestans, Botrytis cinerea, Colletotrichum lagenarium, Alternaria kikuchiana, and Magnaporthe grisea). Shizukaol C showed 88% and 91% protective activities in the greenhouse against Puccinia recondita (wheat leaf rust) and Phytophthora infestans (tomato late blight), respectively, at $100{\mu}g/ml$; shizukaol F exhibited 93% antifungal activity against Puccinia recondita at the same concentration. Therefore, these compounds might serve as interesting candidates for effective antifungal agents.

• 한국응용과학기술학회지
• /
• 제20권2호
• /
• pp.81-86
• /
• 2003

To prepare alkaline degreasing agents(SADAs), tetrasodium pyrophosphate(TSPP), $Na_2CO_3$, Tetronix T-701 (T-701), Na-dioctyl sulfosuccinate(303C), Demol C, and MJU-100A were blended. The prepared degreasing agents were tested with steel specimens and the results were as follows. The degreasing powers of SADA-6($Na_2CO_3$ 50g/TSPP 25g/T-701 10g/303C 15g/Demol C 12g/MJU-100A 8g/water 130g mixture) for press-rust preventing oil were 98% and 99% degreasing at 4wt%, 70 $^{\circ}C$ and 90 $^{\circ}C$, respectively; for quenching oil, the degreasing power of SADA-6 was 92% degreasing at 4wt% and 70 $^{\circ}C$. From these results, it was proved that the SADA-6 exhibits a good degreasing power. Foam heights measured immediately after foaming by Ross & Miles method and Ross & Clark method at 6wt% and 60 $^{\circ}C$ were 16mm and 40mm, respectively. SADA-6 was proved a good low foaming degreasing agent.

• 한국응용과학기술학회지
• /
• 제10권2호
• /
• pp.35-40
• /
• 1993

Alkaline cleaning agent(ACA) was prepared by blending of POE(4)octadecylmine(S-204), $Na_2CO_3$, sodium orthosilicate(Na-OSi). Tetronix T-701(T-701), and MJU-100A. The physical properties of ACA tested with steel specimen showed the following results. The cleaning powers of ACA-6(S-204 80g/$Na_2CO_3$, 160g/Na-OSi, 80g/T-701, 60g/MJU-100A, 20g mixture) for press-rust preventing oil was 98% and 99% degreasing at 2wt%, $70^{\circ}C$ and $90^{\circ}C$, respectively : for quenching oil, the cleaning power of ACA-6 was 95% degreasing at 2wt% and $70^{\circ}C$. From these results, it was ascertained that ACA-6 exhibited a good cleaning power. Foam heights measured immediately after foaming by Ross & Miles method and Ross & Clark method at 3wt%. $60^{\circ}C$ were 17mm and 40mm, respectively. As the result, ACA-6 was proved a good low foaming cleaning agent.

• Journal of Korean Dental Science
• /
• 제3권2호
• /
• pp.26-33
• /
• 2010

We searched at the "PubMed.gov" and "jendodon.com" sites to conduct a literature review on dental instruments that are reused in clinical settings and on infection control involving pre-disinfection or sterilization cleaning/rinsing. The keyword "dental clean" was used for the Web search. We found the present official definition of instrument cleaning performed prior to disinfection or sterilization rather limiting ("removal of foreign matter (soil, organism, etc.) from the instruments"). Thus, we proposed to expand the definition to include the removal of oils applied to protect the metallic instruments and from corrosion, stains, and rust resulting from the frequent reuse of the instruments. Clinicians are found to clean their dental instruments (a) immediately after treating their patients or (b) following their treatment but not immediately afterward. In the latter case, we recommend presoaking to be added. Ultrasonic sterilization of 5~15 minutes is found to be more effective in terms of eliminating residual matter from the instruments compared to other methods. To check on the cleaning results, we recommend visual inspection, which can be quick and practical in clinical settings. The latest products being developed and marketed on the market address the related problems. Nonetheless, research must be continued on the effects of presoak, cleaning/rinsing, disinfection, and high-temperature or heating-based sterilization on the dental instruments and on dental clinicians' practices in cleaning, disinfection, and sterilization. We advise dental clinicians to select the proper cleaning methods and detergents for their instruments to help eliminate or prevent corrosion, staining, and rusting, to reduce the maintenance costs, and to ensure user-friendly instruments/apparatuses.

• Advances in concrete construction
• /
• 제5권4호
• /
• pp.391-405
• /
• 2017

Cement acts as the most important component of concrete as it binds and holds the concrete together. But it is one of the major $CO_2$ emitters all over the world, during manufacturing (900 kg of $CO_2$ per 1000 kg). Some of the modern construction methods aim at reducing the amount of usage of cement and came out with numerous solutions for replacement of the same. One such supplement in current trend is the Steel dust or the Electric Arc Furnace Dust (EAFD), which is a waste product from the electric arc furnace when the scrap metal is melted. When the concrete containing steel dust is exposed to atmosphere, the environmental oxygen and moisture play role to form rust and ultimately the member becomes harder. As Cement is the binder of conventional concrete, only certain percentage of the same could be replaced by the new material, steel dust. Tests were conducted for the 28 days cube strength of M45 grade (suitable for prestressing) concrete which has 0%, 10%, 20%, 30%, 40% and 50% steel dust instead cement. From the test, the optimum percentage replacement of steel dust was obtained, for which the beams and overhead poles were cast, prestressed and tested for the failure load and deflections. A conventional concrete beam and overhead pole were also cast, prestressed and tested to compare the results with those of the beam and pole that contained steel dust. The load vs. deflection plot and other results from the test is also discussed.