• 한국작물학회지
• /
• 제36권5호
• /
• pp.459-480
• /
• 1991

인삼의 생리장해를 산지중심으로 증상별로 종합검토하였다. 뿌리의 장해는 적피, 은피, 동해, 동해, 근부, 안삼, 출아불재, 달래삼, 소수가 있고 지상부에는 황엽, 조기낙엽, 소엽, 지엽, 백반엽, 동해, 풍해와 경열이 있다. 적피와 황엽이 인삼생산에 가장 크게 영향한다. 농약해, 붕소과 잉해 및 산업공해에 의한 피해 경우도 보고되었다. 원료수삼 가공한 후의 품질요인에 관계되는 생리장해들도 검토하였다.

• 대한임상독성학회지
• /
• 제5권2호
• /
• pp.135-137
• /
• 2007

Hydrofluoric acid is a weak inorganic acid used for etching and as rust removals. Systemic toxicity after oral ingestion induces rapid development of hypocalcemia and hyperkalemia, leading to ventricular fibrillation and finally asystole. We report a case of intentional ingestion of hydrofluoric acid producing an altered mental state at the time of the patient's arrival in the emergency department. The patient died approximately 80 minutes after the exposure with asystol.

• Corrosion Science and Technology
• /
• 제8권4호
• /
• pp.157-161
• /
• 2009

The corrosion resistance of reinforcing bar was studied to endure the marine environment during shipment. The red rust on the surface did not damage the adherence in the concrete structures, especially in highly alkaline environment, but made the consumer doubt of the quality. The passivation process by alkalization of the quenching water in the tempcore process failed to endure the long shipping period. The ceramic coating by sol-gel process improved the corrosion resistance without damaging the mechanical properties and adherence between concrete and reinfiorcing bar. Optimal concentration of the coating solution and coating temperature were tested. No additional energy was necessary for the coating process by spraying during cooling process, resulting simplified process and low cost. Salt spray test, cyclic corrosion test and atmospheric test were employed to confirm the resistance. The corrosion rates were presented by rating number and polarization resistance. The coating layer was examined by FIB, XRD and SEM etc.

• 한국농공학회지
• /
• 제18권4호
• /
• pp.4265-4273
• /
• 1976

1. Fine aggregates of concrete are very important for the construction works and construction cost determination. Most of fine aggregates are from the river sand, but the amount of storage in the river side is steadily decreasing due to continuous construction works. Therefore, another source of fine aggregates is needed to meet increasied demand of sand. 2. Beach sand is a possible source of fine aggregates. But rust of steel bar is caused by CL-chemical of beach sand. Therefore, desalinization of beach sand is requested to get durable reinforced concrete. Economical methods of desalinization are as follows. (a) Flooding and drainage method. (b) Washing of beach sand with water supply and mixing. (c) Spreading of beach sand on the land and leaching by rain water for a few month. 3. Hardening of concrete with beach sand is accelerated due to salt, Thus early stage strength increase leads to make cracks. Also later stage strength decreases and durability becomes worse. By using appropriate admixture, the quality of concrete can be improved.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.988-993
• /
• 2004

This paper considers corrosion problems in the bolt connection of weathering steel box girder bridge using the external electric type corrosion resistance method which resisted to local corrosion in coated steel surface with contacted air. The weathering steel was created a rust itself in the passive state. but a coated box girder type was easily dew form could be made galvanic cell that accelerated corrosion. so that it was ruled by protection coat with some paint. Therefore, it needed that can be applied the external electric type corrosion resistance method in coated surface. As a result of the test of polarization amount had measured that the weathering steel was higher currents than the general steel by about $5\~10\%$. Therefore. an external electric type corrosion resistance method can be used to protect local corrosion in the coated bolt connection of weathering steel box girders effectively.

• 조명전기설비학회논문지
• /
• 제28권11호
• /
• pp.26-32
• /
• 2014

In electrolysis smelting plants that using high DC current, the bus bar is most important facility for delivering the high current. The copper made bus bar is widely used for various advantages as good electrical and thermal conductivity, resonable malleability, ductility, and not rust easily. However, when high current in copper bus bar, temperature rises and maximum allowable current capacity is restricted by temperature of bus bar. In this paper, we investigated temperature variation of copper bus bar by putting cooling water channel imposed to bus bar construction. For the validity, various simulations were carried out.

• 한국안전학회지
• /
• 제24권6호
• /
• pp.150-156
• /
• 2009

The oil pressure switch(OPS) for automobile is very important part to prevent an overheated engine and other problems by checking the operation of an engine oil system and displaying oil signs on a dashboard. OPS is the part that receives various stress caused by temperature, vibration, and corrosion in an engine room. Regarding existing steel OPS cases, there occur field errors due to the rust, and much concern comes from the low anticorrosion caused by CR6+ Free according to the restrictions of heavy metals. Therefore, the study analyzed average life, the failure rate, and reliability through the tests of performance according to temperature changes, mechanical strength, and run-test in order to confirm if the use of the oil pressure switch with Al of anti-corrosion can improves the reliability, instead of the existing steel products.

• 전산구조공학
• /
• 제7권4호
• /
• pp.119-126
• /
• 1994

철근 콘크리트 구조물은 여러가지 복합적인 원인으로 균열이 발생한다. 이러한 균열은 내구성의 저하와 일체식 구조물의 외관을 손상시킬 뿐 아니라 철근이 공기중이나 해수에 노출되어 철근의 부식으로 콘크리트 구조물에 치명적인 구조적 문제를 야기시킨다. 본 연구에서는 서해안 A 항만 건설현장 케이슨 구조체의 일부 균열현상에 대하여, 유한요소법을 이용 Computer Modelling을 하고, 제작 및 진수, 예인, 가거치 등 시공단계별 구조해석을 통해, 균열발생원인을 규명하고, 올바른 시공법을 제안하였다.

• Journal of Ginseng Research
• /
• 제19권1호
• /
• pp.77-83
• /
• 1995

This study was conducted to investigate the chemical components of rusty root for seeking the cause of rust. Na, Fe contents were higher in various tissues of six-year-old rusty root than healthy root. Contents of total sugar in epidermis of rusty root was low but crude lignin and suborn contents were high. Crude lipid content increased with the rate of rusty symptoms in each part of root respectively. Pentadecanoic, stearic, oleic, lignoseric acid contents increased in cortex of tap root with the rate of rusty symptoms but decreased in pith. Total ginsenoside and crude saponin contents increased , in pith and cortex of tap root with the rate of rusty symptoms but decreased in lateral and fine root.

• 한국디지털건축인테리어학회논문집
• /
• 제8권1호
• /
• pp.57-64
• /
• 2008

There are many problems in present truss-deck slab system for example welding defect, segregation, water leakage, rust and tarnish etc. These problems may be caused by spot welding thin galvanized steel plate and lattice bar. The TOX Joining Systems is to join metal sheets of different material and thickness with and without coating or painting without adding heat or a joining part. Newly developed TOX-deck slab system using non-welding joint is free from above mentioned problems. The objects of this study are suggestion of design strength of TOX joint by experimental and statistical analyses and development of window based program to design the TOX-deck slab system.