• Fashion & Textile Research Journal
• /
• v.15 no.2
• /
• pp.219-230
• /
• 2013

To generate future profits, luxury brands need to recognize and understand customers as individually important and analyze the impact factors that improve specific customer equity. With the growing recognition that customer equity is a key strategic asset, this study empirically investigates the effect of customer equity drivers on customer loyalty based on the study of Vogel et al.(2008) which expanded the Rust et al.(2000)'s study on customer equity. We empirically examine if the customer equity drivers have a different impact on customer loyalty. This study hypothesizes that the relative effect of customer equity drivers would be different depending on the purchasing behavior of consumers and examines the effects of them on the relationship of the drivers of customer equity and customer loyalty. We use stepwise multiple regression analysis to empirically test the relationship of value equity, brand equity, and relationship equity and customer loyalty. Relationship equity influences customer loyalty more strongly than value equity and brand equity. Customers seem to build loyalty based on the careful assessment of all costumer equity drivers (value equity, brand equity, and relationship equity). In addition, their relative impact is different depending on the purchasing behavior of consumers. A company cannot maintain all customer equity drivers at a high level with limited marketing resources; therefore, marketing investment for all customer equity drivers need to be allocated differentially depending on the purchasing behavior of consumers.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.2
• /
• pp.163-170
• /
• 2010

We have studied on welding dissimilar materials of cold-reduced carbon steel sheet and stainless steel sheet together by using laser beam. It is well known that stainless steel is so strong againt rust and heat, while cold-reduced carbon steel is widely used in various parts of industry. In this research we have performed some experiments to know the possibility of welding dissimilar materials using laser beam by adjusting the power output of 3kW laser. Other conditions of the experiments were as follows : the welding speed was varied in the range between 2m/min and 7m/min, argon gas and helium gas were used as shield gas, the flow value of shield gas was ranged between $10{\ell}/min$ and $30{\ell}/min$, and the gap of two materials was ranged between 0mm and 0.3mm. In order to ascertain of the welded surface, we have done the tensile strength testing, the hardness testing and the microscope observation. As a result, we have found that tensile strength was the highest at the condition of the welding speed of 4, the flow value of $20{\ell}/min$, the gap of two materials 0, and the use of helium gas. Above testings have also showed that the tensile strength was generally satisfactory since the penetration of welding was almost complete due to the thinness of the materials. In addition, the formation of the welded area was excellent when it had the highest tensile strength.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.1
• /
• pp.112-117
• /
• 2005

Abstract Griseofulvin has been used as an antifungal antibiotic for the treatment of mycotic diseases of humans and veterinary animals. The purpose of this work was to identify a griseofulvin-producing endophytic fungus from Abies holophylla and evaluate its in vivo antifungal activity against plant pathogenic fungi. Based on nuclear ribosomal ITS1-5.8SITS2 sequence analysis, the fungus was identified and labeled as Xylaria sp. F0010. Two antifungal substances were purified from liquid cultures of Xylaria sp. F0010, and their chemical identities were determined to be griseofulvin and dechlorogriseofulvin through mass and NMR spectral analyses. Compared to dechlorogriseofulvin, griseofulvin showed high in vivo and in vitro antifungal activity, and effectively controlled the development of rice blast (Magnaporthe grisea), rice sheath blight (Corticium sasaki), wheat leaf rust (Puccinia recondita), and barley powdery mildew (Blumeria graminis f. sp. hordei), at doses of 50 to 150 ${\mu}$g/ml, depending on the disease. This is the first report on the production of griseofulvin and dechlorogriseofulvin by Xylaria species.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.5
• /
• pp.383-389
• /
• 2016

In this paper, we present the hull blasting machine with vision-based weld bead recognition device for cleaning shipment exterior wall. The purpose of this study is to introduce the mechanism design of the high efficiency hull blasting machine using the vision system to recognize the weld bead. Therefore, we have developed a robot mechanism and drive controller system of the hull blasting robot. And hull blasting characteristics such as the climbing mechanism, vision system, remote controller and CAN have been discussed and compared with the experimental data. The hull blasting robots are able to remove rust or paint at anchor, so the re-docking is unnecessary. Therefore, this can save time and cost of undergoing re-docking process and build more vessels instead. The robot uses sensors to navigate safely around the hull and has a filter system to collect the fouling removed. We have completed a pilot test of the robot and demonstrated the drive control and CAN communication performance.

• Journal of Applied Biological Chemistry
• /
• v.49 no.3
• /
• pp.101-105
• /
• 2006

Degradation of the herbicide butachlor was investigated using laboratory-synthesized zerovalent iron ($Fe^0$). The synthesized zerovalent iron was determined to be nanoscale powder by scanning electron microscopic analysis. To investigate degradation of butachlor using the synthesized nanoscale zerovalent iron, time-course batch experiments were conducted by treating the solution of butachlor formulation with the iron. More than 90% degradation of butachlor was observed by iron treatment within 24 h. The synthesized nanoscale zerovalent iron showed an increase in particle aggregation in the batch tests. Green rust formation and a pH drop in solutions were observed, suggesting that the oxidation of the iron occurred. When the iron was extracted with dichloromethane, a negligible concentration was found in the extract, suggesting that butachlor did not bind to the iron particles. GC/MS analysis detected the dechlorinated product as a major degradation product of butachlor in the solutions. The data indicate that laboratory-synthesized zerovalent iron functioned as a reductant to remove electron-withdrawing chlorine, giving the dechlorinated product.

• The Plant Pathology Journal
• /
• v.23 no.4
• /
• pp.308-313
• /
• 2007

A survey of the occurrence of abiotic diseases on kiwifruit (Actinidia deliciosa) trees was conducted at sixty-two kiwifruit orchards in twenty-one locations of Jeonnam and Jeju Provinces in Korea during the 2007 growing season. Various kinds of abiotic diseases were detected on the kiwifruit trees. Malformed fruits caused by incomplete pollination were commonly observed among the normally growing fruits on almost all of the kiwifruit trees examined. Fruits imbued with wire rust, fruits scratched or girdled by the wire and fruits injured by sunscald occurred in all of the examined orchards. Abnormal growth of girdled branches by the fence wire, dead trees killed by excessive soil moisture due to poor draining and leaf chlorosis by nutrient deficiencies were found in some orchards. Leaf spotting by herbicide and leaf scorch or blight by excessively high temperature were observed. Leaf blight on young shoots by late frost and bark split on trunks by freeze occurred in several open-field orchards. Flooding and strong wind damages by attack of typhoon 'Nari' were also found during the survey period. Cup-shaped leaves frequently occurred on young shoots in early spring and the incidence of the syndrome tends to increase annually in recent years, which are not etiologically defined until now.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.12
• /
• pp.1655-1662
• /
• 2011

We have conducted a study on stainless steel laser-welding materials by using a laser beam for the evaluation. Stainless steel used in a rust and excellent thermal deformation has a variety of application. In this study, to improve the mechanical properties of stainless steel, a 50 W laser thermal source is used and magnetic fields are applied, on the basis of suggestions. The mechanical properties and performance are evaluated by performing a numerical analysis, tensile test, and shape, microstructure, and hardness test. The results show that the mechanical properties of improve increased speed the melting pool, tensile strength of 16 kPa rise, run into the melting zone and hardness 7 Hv.

• Korean Journal of Medicinal Crop Science
• /
• v.9 no.2
• /
• pp.150-155
• /
• 2001

This experiment was carried out to investigate the effect of rain shelter cultivation on growth characteristic and yield on Paeonia lactiflora Pallas. The sprouting time and flowering time of rain shelter cultivation were 9days and 15days, more quickly than that of field conditions, and stem length and number of stem per plant were many more or larger. The disease occurrence rain shelter cultivation was decreased of rust, anthracnose, powdery mildew and root rot disease compared to field conditions, and leaf spot disease was to similar. The root length, number of root and root diameter were to be good in the rain shelter cultivation. Root color and commercial ratio of rain shelter cultivation were better lighten and improved than field cultivation. Root yield of rain shelter was 2,395kg/10a, this was increased 9% and 27% respectively, compared to 2,201kg/10a, 1,892kg/10a of field A and field B.

• Journal of Biosystems Engineering
• /
• v.8 no.1
• /
• pp.38-46
• /
• 1983

This study was carried out to investigate the possibility of improving the performance of a kerosene engine with water addition. The engine used in this study was a single-cylinder, four-cycle kerosene engine with the compression ratio of 4.5. Water could be successfully added into the inlet manifold by an extra carburetor for the volumetric ratios of 5, 10, 20, and 30 percents. Variable speed tests at wide-open throttle were performed for five speed levels in the range of 1,000 to 2,200rpm for each fuel type. Volumetric efficiency and brake specific fuel consumption were determined, and brake thermal efficiency based on the lower heats of combustion of kerosene was calculated. To examine variation in fuel consumption, CO concentration, and cooling water temperature, part load tests were also performed. The results obtained are summarized as follow. (1) Brake torque increased almost in proportion to volumetric efficiency. But the ratio of increase in torque was greater than that of volumetric efficiency. Mean torque over the speed range of 1,000 to 2,200rpm increased 1, 3, 7, and 2 percents for 5, 10, 20, and 30 percents water addition, respectively. The increase in brake torque with water addition was greater at lower speeds. (2) Mean brake specific fuel consumption over the speed range of 1,000 to 2,200rpm decreased 1, 2, 3, and 3 percents for 5, 10, 20, and 30 percents water addition, respectively. (3) Mean temperature of cooling water over the speed range of 1,000 to 2,200rpm decreased 2, 4, 8, and 12 percents for 5, 10, 20, and 30 percents water addition, respectively. (4) The effects of decreasing CO concentration in the exhaust emissions with water addition were significant. At the speed range of 1,000 to 2,200rpm, CO concentration in the exhaust emissions decreased 2, 10, 23, percents for 5, 10, and 20 percents water addition, respectively. (5) Deposits were not discovered in the combustion chamber during the experiment. However, a little rust was formed in the water-supply carburetor.

• Journal of the Korean institute of surface engineering
• /
• v.44 no.1
• /
• pp.21-25
• /
• 2011

This test focuses on the correlation between the lubrication, ductility and strength through the change of nut lubricant which decides joining angle for A490 bolt sets required in the AASHTO (American Association of State Highway & Transportation Officials). Because the lubrication of high tension bolt, nut, washer sets becomes an important factor to ductility and joining load, the quality improvement is required for improving reliability and securing enough lubrication of maker and user. This study examines the quality characteristics required in the specification through tests because only this standard specifies joining quality in the extreme conditions (as much about two times of the joining angle on site as normal condition). Moreover, this study is limited to the test on joining axial force required in the AASHTO for the three nut lubrication conditions of A490 bolt set. It is concluded that the nuts should be coated or waxed enough for the improvement of the joining axial force and ductility of bolts required in the standards. It is shown that in the case of plain high tension bolt sets, a rust preventing lubricative oil shall be applied and the torque coefficient value for A490 bolt sets should be maintained below 0.175.