• Journal of the Korean Geosynthetics Society
• /
• v.16 no.4
• /
• pp.75-82
• /
• 2017

In this study, a new cleaning method using carbon dioxide pellet in the part of underground pipe cleaning method was proposed and verified. First of all, the commentary of The Society for Protective Coatings was examined in detail to determine the quantitative cleaning effects. Also, field tests were carried out to confirm the application of the new method. In the test, the surface condition of inner pipe after the application of the new method was investigated and two types of nozzles were compared in the tests. Also, the tests to measure the final impact pressure of air and carbon dioxide pellet mixtures were performed to investigate the losses of air pressure were investigated. Through this verification on the new method, it was found that the new method is very efficient for the removal of the rust in the pipe cleaning works. Also, the nozzle with excellent cleaning effect was also selected. As a result, this method will be able to largely contribute to the recycling of $CO_2$ which is limited to the use as a cooling agent or the storage of waste.

• Corrosion Science and Technology
• /
• v.13 no.5
• /
• pp.195-203
• /
• 2014

Modern industry has a wide variety of application areas such as ocean industry, construction and automobile industry. With the current circumstances, the need for anti-corrosion technology that can be used on materials to withstand in harsh environments, is increasing. In this study, we have sought to develop a metal coating technology with zinc and aluminum powders as a potential anti-corrosion material. To make a coating on metal products, a thermal diffusion coating method was used under the conditions of $350^{\circ}C$ for 30 minutes. Optical microscope, Field emission scanning electron microscope (FE-SEM&EDX) and X-ray diffraction analysis were used to analyze a coating layer. As a result, we have confirmed that the generated amount of rust on metal parts coated with thermal diffusion coating method decreased dramatically compared with non-coated metal parts. Furthermore, the anti-corrosion performance was evaluated according to the different ratio of zinc and aluminum. Finally, we confirmed the possibility of application and commercialization of our coating technique on metal parts used in harsh industrial based on the results of these performance.

• Journal of the Society of Disaster Information
• /
• v.16 no.2
• /
• pp.411-419
• /
• 2020

Purpose: This study is intended to improve the performance of traffic signs corroded by aging, to ensure maintenance efficiency, a water-hardened coating solution was developed. Performance tests were then used to determine the optimal component scale. Method: For research purposes, the results were analyzed by conducting corrosion resistance assessment, physical properties evaluation, storage safety assessment, etc. on coating solutions of various magnifications. Results: The analysis results showed that there was little hearing in the cutting area in the liquid with added magnesium, so the method effect was excellent. And there was little blister occurrence, which was analyzed at the highest magnification. Conclusion: Enhancements to future new component scale experiments are needed for water-hardened coating solutions that have been recognized for their performance through this study. And institutional improvement efforts are needed to expand the enforcement of traffic sign maintenance using coating solutions.

• The Korean Journal of Pesticide Science
• /
• v.8 no.1
• /
• pp.8-15
• /
• 2004

A synthesis of new $\beta$-ketoacetoanilide chloride derivatives and anti fungal activity of these compounds library against 6 typical plant pathogens were described. Reaction of ketene dimer with chlorine followed by treatment of aniline derivatives gave 89 kinds of the corresponding $\beta$-ketoacetoanilide chlorides through combinatorial synthetic technology using Carousel Reaction Stations. Evaluation of antifungal activity (in vivo) of this chemical library against rice blast, rice sheath blight, tomato aray mold, tomato late blight, wheat leaf rust and barley powdery mildew was carried out. In general, $\beta$-ketoacetoanilide chlorides which present a substituent at 4 in phenyl group(para) of the compounds showed selective control activity against tomato late blight caused by Phytophthora infestans.

• Journal of The Korean Astronomical Society
• /
• v.36 no.1
• /
• pp.33-41
• /
• 2003

Recent observations have shown that coronal magnetic fields in the northern (southern) hemisphere tend to have negative (positive) magnetic helicity. There has been controversy as to whether this hemispheric pattern is of surface or sub-surface origin. A number of studies have focused on clarifying the effect of the surface differential rotation on the change of magnetic helicity in the corona. Meanwhile, recent observational studies reported the existence of transient shear flows in active regions that can feed magnetic helicity to the corona at a much higher rate than the differential rotation does. Here we propose that such transient shear flows may be driven by the torque produced by either the axial or radial expansion of the coronal segment of a twisted flux tube that is rooted deeply below the surface. We have derived a simple relation between the coronal expansion parameter and the amount of helicity transferred via shear flows. To demonstrate our proposition, we have inspected Yohkoh soft X-ray images of NOAA 8668 in which strong shear flows were observed. As a result, we found that the expansion of magnetic fields really took place in the corona while transient shear flows were observed in the photosphere, and the amount of magnetic helicity change due to the transient shear flows is quantitatively consistent with the observed expansion of coronal magnetic fields. The transient shear flows hence may be understood as an observable manifestation of the pumping of magnetic helicity out of the interior portions of the field lines driven by the expansion of coronal parts as was originally proposed by Parker (1974).

• Journal of the Korean Society for Heat Treatment
• /
• v.15 no.5
• /
• pp.213-218
• /
• 2002

In order to develop the economic and environmental water-soluble black coloring agent, some adequate chemical mixtures were mixed and this solution was applied to coat quenched and tempered 51B20 steel bolt. Some basic properties of the solution and characteristics of the coated film in addition to the corrosion resistance were investigated. The developed 100 kg of water-soluble black coloring agent solution was a chemical mixture consisted of 10 kg of aqueous coloring agent, 40 kg of surface active agent, 0.3 kg of anti-foam agent and $50{\ell}$ of water. The coated film of the bolt was composed of hard layer of about $2{\mu}m$ and the disbondable soft layer of about $4{\mu}m$ above the hard layer. Many surface active agents peaks and a few hydrophilic peaks were observed in the coated film. Surface roughness value of the coated bolt was lower than that of the non-coated bolt. Corrosion resistance of the coated bolt considerably improved and also relatively showed a good polarization resistance at test condition of $40^{\circ}C$ colorizing temperature and 5% the solution concentration in 3% NaCl anodic polarization test. Initial appearance time of the surface rust was greatly retarded owing to the coated film in salt spray test.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.38 no.1
• /
• pp.79-88
• /
• 2002

13%Cr martensitic stainless steel has been used mainly with a material for fish pre-processing machinery. However, it has not very nice cutting section because of little of the carbon content. Therefore, SUS420J2 steel that contents 0.3%C with high-strength in spite of the rust is used with a material for fish pre-processing machinery. However, studies on the corrosion characteristics of SUS420J2 steel are relatively rare. Especially, the corrosion phenomenon may cause serious degradation because the fish pre-processing machinery is exposed always to seawater environment. In this paper, the immersion corrosion test was carried out at seawater environment (pH=7.52) on SUS420J2 steel specimens that have various post-treatment conditions and its corrosion characteristics were evaluated. From test results, the specimens such as base metal, vacuum heat treatment, electrolytic polishing and tempering after quenching tend somewhat sensitive from the corrosion. In the case of vacuum heat treatment specimen of continuous immersion during 360 days, the weight loss ratio was high about seven times when compared with the different specimens. On the contrary, SUS420J2 steel specimen that has the heat treatment of tempering after quenching and the electrolytic polishing was less sensitive from the corrosion, and the weight loss ratio was very low.

• The Plant Pathology Journal
• /
• v.22 no.1
• /
• pp.94-96
• /
• 2006

In a search for plant extracts with potent in vivo antifungal activity against various plant pathogenic fungi, the methanol extract of the Curcuma longa rhizomes effectively controlled the development of rice blast catised by Magnaporthe grisea and tomato late blight caused by Phytophthora infestans. Three curcuminoids such as curcumin, demethoxycurcumin, and bisdemethoxycurcumin were purified from the methanol extract of C. longa rhizomes as antifungal principles. Among the three curcuminoids, demethoxycurcumin was the most active to both rice blast and tomato late blight, followed in order by curcumin and bisdemethoxycurcumin. However, they all exhibited no or little in vivo antifungal activity against other fungal pathogens causing rice sheath blight (Corticium sasaki), tomato gray mold (Botrytis cinerea), wheat leaf rust (Puccinia recondita), or barley powdery mildew (Blumeria graminis f. sp. hordel).

• The Plant Pathology Journal
• /
• v.25 no.1
• /
• pp.1-5
• /
• 2009

Root rot caused by Cylindrocarpon destructans is one of the most important diseases of ginseng (Panax ginseng C. A. Meyer). Two types of symptoms found in ginseng root rot are black root rot and rusty root (rusty spots), in which disease severities are high and low, respectively. Symptom development and related histopathological changes were examined in an inoculation test on 2-year-old ginseng roots using virulent (Cy9801) and avirulent (Cy0001) isolates of C. destructans under different temperature conditions (13, 18, 23, and $28^{\circ}C$). Black root rot was only induced by Cy9801 in the lower temperature range (13, 18, and $23^{\circ}C$) and not at the higher temperature ($28^{\circ}C$). No black root rot, but only rusty spot symptoms, were induced by Cy0001 at all temperatures tested except $13^{\circ}C$, at which no symptoms occurred on over half of inoculation sites, suggesting disease development was influenced by pathogen virulence and temperature. Wound periderms were formed in all root tissues with rust spot symptoms at $28^{\circ}C$ caused by Cy9801 and at 18, 23, and $28^{\circ}C$ temperatures caused by Cy0001. No wound periderm was formed at $13^{\circ}C$ by either Cy9801 or Cy0001. Light microscopy revealed that the wound periderm was formed by initial cell divisions in cell wall formation and/or additional cell wall layering in parenchyma cells without obvious nuclear division, followed by layering of the divided cells adjacent to the inoculation sites, blocking the spread of the rot. These results suggest that disease development declined at lower temperatures and by the formation of a wound periderm at higher temperatures, and that ginseng rusty root may develop under conditions unfavorable for further disease development of C. destructans.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.5
• /
• pp.67-74
• /
• 2010

Chromate conversion coating is a coating technique used to passivate aluminum, zinc, cadmium, copper, silver, magnesium, tin, and their alloys to slow corrosion. The process uses various toxic chromium compounds, which may include hexavalent chromium. The industry is developing less toxic alternatives in order to comply with substance restriction legislation, such as RoHS. One alternative is to develop a Cr-free coating solution. In this study, eco-friendly, Cr-free solutions (urethane solution S-700, organic/inorganic solution with Si LRO-317) were used. Test specimens were dried in a drying oven at $190^{\circ}C$ for 3, 5, 7, and 9 minutes. Corrosion resistance was evaluated using a salt spray test for 72 hours. The results show that the optimum corrosion resistance was achieved at $190^{\circ}C$ for five minutes for EGI and three or five minutes for HDGI, respectively. The adhesive properties of the two types of coating solutions were superior regardless of drying time.