• Journal of Wetlands Research
• /
• v.19 no.3
• /
• pp.271-278
• /
• 2017

Low impact development (LID) technology has been recently applied for the treatment of nonpoint source pollutants. Rain garden is one of the widely used LIDs since it utilizes various mechanisms such as biological and physico-chemical treatment to reduce pollutants. However, problem such as clogging has been one of the issues encountered by the rain garden that do not undergo constant maintenance. Therefore, this research was conducted to develop and determine the component arrangement of a rain garden system for a more efficient volume and pollutant reduction. Two hybrid rain garden systems having different characteristics were developed and evaluated to determine the optimum design and arrangement of the system. The results showed that the components arranged in a series manner showed a volume reduction of 93% and a pollutant reduction efficiency of approximately 99%, 93% and 95% was observed for particulates, nutrients and heavy metals, respectively. While when the system is connected in a combined series-parallel, the volume and average pollutant reduction efficiency for the TSS, nutrients and heavy metals are 65%, 94%, 80% and 85%, respectively. Moreover, the component arrangement in the order of sedimentation tank, infiltration tank and plant bed exhibited a high pollutant reduction efficiency compared when the infiltration tank and plant bed were interchanged. The findings of this research will help in the further development and optimization of rain garden systems.

• Journal of Korea Water Resources Association
• /
• v.45 no.1
• /
• pp.39-52
• /
• 2012

Surface-subsurface interactions are an intrinsic component of the hydrologic response within a watershed. In general, these interactions are considered to be one of the most difficult areas of the discipline, particularly for the modeler who intends simulate the dynamic relations between these two major domains of the hydrological cycle. In essence, one major complexity is the spatial and temporal variations in the dynamically interacting system behavior. The proper simulation of these variations requires the need for providing an appropriate coupling mechanism between the surface and subsurface components of the system. In this study, an approach for modelling surface-subsurface flow and transport in a fully intergrated way is presented. The model uses the 2-dimensional diffusion wave equation for sheet surface water flow, and the Boussinesq equation with the Darcy's law and Dupuit-Forchheimer's assumption for variably saturated subsurface water flow. The coupled system of equations governing surface and subsurface flows is discretized using the finite volume method with central differencing in space and the Crank-Nicolson method in time. The interactions between surface and subsurface flows are considered mass balance based on the continuity conditions of pressure head and exchange flux. The major module consists of four sub-module (SUBFA, SFA, IA and NS module) is developed.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.48 no.3
• /
• pp.34-44
• /
• 2020

In order to suggest performance analysis directions of ecological components based on a vegetation-based LID system model, this study seeks to analyze the statistical significance between monitoring results by using SWMM computer simulation and rainfall and run-off simulation devices and provide basic data required for a preliminary system design. Also, the study aims to comprehensively review a vegetation-based LID system's soil, a vegetation model, and analysis plans, which were less addressed in previous studies, and suggest a performance quantification direction that could act as a substitute device-type LID system. After monitoring artificial rainfall for 40 minutes, the test group zone and the control group zone recorded maximum rainfall intensity of 142.91mm/hr. (n=3, sd=0.34) and 142.24mm/hr. (n=3, sd=0.90), respectively. Compared to a hyetograph, low rainfall intensity was re-produced in 10-minute and 50-minute sections, and high rainfall intensity was confirmed in 20-minute, 30-minute, and 40-minute sections. As for rainwater run-off delay effects, run-off intensity in the test group zone was reduced by 79.8% as it recorded 0.46mm/min at the 50-minute point when the run-off intensity was highest in the control group zone. In the case of computer simulation, run-off intensity in the test group zone was reduced by 99.1% as it recorded 0.05mm/min at the 50-minute point when the run-off intensity was highest. The maximum rainfall run-off intensity in the test group zone (Dv=30.35, NSE=0.36) recorded 0.77mm/min and 1.06mm/min in artificial rainfall monitoring and SWMM computer simulation, respectively, at the 70-minute point in both cases. Likewise, the control group zone (Dv=17.27, NSE=0.78) recorded 2.26mm/min and 2.38mm/min, respectively, at the 50-minutes point. Through statistical assessing the significance between the rainfall & run-off simulating systems and the SWMM computer simulations, this study was able to suggest a preliminary design direction for the rainwater run-off reduction performance of the LID system applied with single vegetation. Also, by comprehensively examining the LID system's soil and vegetation models, and analysis methods, this study was able to compile parameter quantification plans for vegetation and soil sectors that can be aligned with a preliminary design. However, physical variables were caused by the use of a single vegetation-based LID system, and follow-up studies are required on algorithms for calibrating the statistical significance between monitoring and computer simulation results.

• Journal of Soil and Groundwater Environment
• /
• v.12 no.5
• /
• pp.19-32
• /
• 2007

In Korea, there have been various methods of estimating groundwater recharge which generally can be subdivided into three types: baseflow separation method by means of groundwater recession curve, water budget analysis based on lumped conceptual model in watershed, and water table fluctuation method (WTF) by using the data from groundwater monitoring wells. However, groundwater recharge rate shows the spatial-temporal variability due to climatic condition, land use and hydrogeological heterogeneity, so these methods have various limits to deal with these characteristics. To overcome these limitations, we present a new method of estimating recharge based on water balance components from the SWAT-MODFLOW which is an integrated surface-ground water model. Groundwater levels in the interest area close to the stream have dynamics similar to stream flow, whereas levels further upslope respond to precipitation with a delay. As these behaviours are related to the physical process of recharge, it is needed to account for the time delay in aquifer recharge once the water exits the soil profile to represent these features. In SWAT, a single linear reservoir storage module with an exponential decay weighting function is used to compute the recharge from soil to aquifer on a given day. However, this module has some limitations expressing recharge variation when the delay time is too long and transient recharge trend does not match to the groundwater table time series, the multi-reservoir storage routing module which represents more realistic time delay through vadose zone is newly suggested in this study. In this module, the parameter related to the delay time should be optimized by checking the correlation between simulated recharge and observed groundwater levels. The final step of this procedure is to compare simulated groundwater table with observed one as well as to compare simulated watershed runoff with observed one. This method is applied to Mihocheon watershed in Korea for the purpose of testing the procedure of proper estimation of spatio-temporal groundwater recharge distribution. As the newly suggested method of estimating recharge has the advantages of effectiveness of watershed model as well as the accuracy of WTF method, the estimated daily recharge rate would be an advanced quantity reflecting the heterogeneity of hydrogeology, climatic condition, land use as well as physical behaviour of water in soil layers and aquifers.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.4
• /
• pp.815-820
• /
• 2015

For the establishment of effective water resources management platform for Jeju-Island, the characteristics, including surface runoff, evapotranspiration, groundwater recharge and discharge are to be properly quantified. Among these hydrologic components, interception due to vegetation is very important factor but it is hard to be quantified. After Von Hoyningen-Huene (1981) found the relationship between LAI (Leaf Area Index) and interception storage, LAI has been used for key factor to estimate interception and transpiration. In this study the equation suggested by Kozak et al. (2007) is implemented in SWAT-K (Soil and Water Assessment Tool - Korea) model and is tested at the Cheonmicheon watershed in Jeju-Island. The evaporation due to interception was estimated as 85~104mm, 8~11% of whole evaporation. Therefore it is necessary to consider the evaporation due to interception as a controlling factor to water budget of this watershed.

• Journal of Korea Water Resources Association
• /
• v.37 no.9
• /
• pp.745-758
• /
• 2004

Hydrological models simulate the land phase components of the water cycle and provide a mechanism for evaluating the effects of climatic variation and change on water resources. Evapotranspiration(ET) is a critical process within hydrological models. This study evaluates five different methods for estimating ET in the SLURP(Semi-distributed Land Use Runoff Process)model, in the Yongdam basin. The five ET methods were the FAO Penman-Monteith, Morton CRAE (Complementary Relationship Area Evapotranspiration), the Spittlehouse-Black, the Granger, the Linacre model. We evaluated the five ET models, based on the ability of SLURP model to simulate daily streamflow, and How the five ET methods influence the sensitivity of simulated streamflow to changes in key model parameters and validation SLURP independently for each ET methods. The results showed that the Merton CRAE model had more physical significance and gave better agreement simulated stream flow and recorded flows. It noted that the Morton CRAE model might be more appropriate for the simulation of the actual evapotranspiration in SLURP hydrologic model.

• Journal of Korea Water Resources Association
• /
• v.38 no.9 s.158
• /
• pp.713-725
• /
• 2005

The objective of this study is to evaluate the applicability and simulation capability of PRMS, developed by U.S. Geological Survey, over the seven multi-purpose dam watersheds in Korea. The basic concepts of model components and their parameters are investigated for the evaluation of model applicability and the possibility of model parameter estimation is suggested based on the data availibility. For model parameter estimation, some parameters are directly estimated from measurable basin characteristics, but the others are estimated by Rosenbrock's automatic optimization scheme. The results show that the simulated flows from the model were very close to the observed ones. Although the default values for snowmelt model parameter are used, the results from snowmelt simulation is also acceptable. The model shows that the simulation capability is not sensitive to the basin size, however, according to increasing basin area, simulation characteristics are close to those for lumped model rather than semi-distributed model.

• Journal of Ecology and Environment
• /
• v.38 no.2
• /
• pp.145-156
• /
• 2015

This study was based on water quality data of the Lake Doam watershed, monitored from 2010 to 2013 at eight different sites with multiple physiochemical parameters. The dataset was divided into two sub-datasets, namely, non-rainy and rainy. Principal component analysis (PCA) and factor analysis (FA) techniques were applied to evaluate seasonal correlations of water quality parameters and extract the most significant parameters influencing stream water quality. The first five principal components identified by PCA techniques explained greater than 80% of the total variance for both datasets. PCA and FA results indicated that total nitrogen, nitrate nitrogen, total phosphorus, and dissolved inorganic phosphorus were the most significant parameters under the non-rainy condition. This indicates that organic and inorganic pollutants loads in the streams can be related to discharges from point sources (domestic discharges) and non-point sources (agriculture, forest) of pollution. During the rainy period, turbidity, suspended solids, nitrate nitrogen, and dissolved inorganic phosphorus were identified as the most significant parameters. Physical parameters, suspended solids, and turbidity, are related to soil erosion and runoff from the basin. Organic and inorganic pollutants during the rainy period can be linked to decayed matters, manure, and inorganic fertilizers used in farming. Thus, the results of this study suggest that principal component analysis techniques are useful for analysis and interpretation of data and identification of pollution factors, which are valuable for understanding seasonal variations in water quality for effective management.

• Journal of Korea Water Resources Association
• /
• v.40 no.3
• /
• pp.251-263
• /
• 2007

In this paper, we constructed the integrated watershed model system, SWAT-Nak Dong that include areal mean precipitaiton, runoff and water balance components in the Nak Dong river basins and with this model system we are capable of estimating streamflows for ungaged river stations and analyzing the variations of the streamflows. SWAT(Soil and Water Assessment Tool) is a conceptual, continous time model that was developed in the early 1990s to assist water resource managers in assessing the impact of management and climate on water supplies and non-point source pollution III watersheds and large river basins. Using the SWAT-Nak Dong system and various scenarios, we analyzed and evaluated the dams and water uses effects on the streamflows.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.2069-2073
• /
• 2007

효과적인 저수지 수질관리 대책을 수립하기 위해서는 상류 유역으로부터 오염원의 유출특성에 대한 정확한 이해가 필요하다. 강우시 대부분 유입하는 비점오염원은 실측에 많은 비용과 시간이 소요되어 부하량 산정에 어려움이 있어 전체 부하량에서 차지하는 기여도를 파악하는데 어려움이 있었다. 본 연구의 목적은 Digital Filter 기법을 이용하여 댐 유입량 수문곡선으로부터 유출성분을 분리하고, 강우시 유출하는 비점오염부하량을 산정하는 방법을 개발하는데 있다. 연구대상지역은 대청호를 선택하였다. 유출성분별 오염부하량을 정량화하기 위해 댐 유입량을 각각 지표유출, 중간유출 및 기저유출 성분으로 분리하고, 강우시 지표유출과 중간유출을 합하여 비점오염원 부하량(직접유출)으로 산정하였다. 유출성분별 일별 부하량은 실측된 유량 및 수질자료로부터 유도된 유량-부하량의 상관관계식을 적용하였다. 연구결과 대청호 유입량의 유출성분비는 각각 지표유출 49.2%, 중간유출 25.5% 및 기저유출 25.4%로 산정되었다. 2001년 옥천지점에서 유출성분분리 결과, 총 유출량 중 기저유출, 지표유출, 중간유출의 비가 각각 35.1%, 39.5%, 25.5%로 산정되었고, 청성지점은 각각 39.7%, 36.1%, 24.2%로 나타났다. $2001{\sim}2005$년까지 유출 성분별 비점오염원 부하량을 산정한 결과, 대청호에 비점오염원 부하량 기여율의 범위(평균값)는 각각 BOD $65.2{\sim}88.0%$(평균 83.5%), COD $68.1{\sim}$ 89.3%(평균 86.8%), T-N $60.4{\sim}88.6%$(평균 84.2%), 그리고 T-P $77.7{\sim}96.6%$(평균 94.3%)로 산정되었다. 이러한 결과는 대청호로 유입하는 유기물과 영양염류 연간 부하량의 80% 이상이 강우-유출과 함께 유입하는 것을 의미하며, 저수지 수질관리를 위해서는 유역차원의 비점오염원 관리가 시급함을 시사한다.